LED Commercial Lighting and Lighting Controls | Current - GLI Brands
LAI Photometric InstabaseLAI Photometric Instabase
Owner's Manual for GE current models including: Evolve EALS Series, LED Outdoor Area Light, Evolve EALS Series LED Outdoor Area Light, Outdoor Area Light, Area Light, Light
Library | Spec Sheets | Installation Guides | Current
File Info : application/pdf, 9 Pages, 2.06MB
DocumentDocumentEvolve® EALS Series LED Outdoor Area Light CUSTOMER NAME Project Name Date Catalog Number Type The EALS Area Light luminaire offers a wide range of optical patterns, color temperatures, lumen packages and mounting configurations to optimize area light applications, as well as provide versatility in lighting design within the same form-factor. They are ideal for commercial property site-lighting applications such as retail and commercial exteriors. CONSTRUCTION Housing: Aluminum die cast enclosure. Integral heat sink for maximum heat transfer Lens: Impact resistant tempered glass Paint: Corrosion resistant polyester powder paint, minimum 2.0 mil thickness Standard = Black, Dark Bronze Gray, White (RAL & custom colors available) Optional = Coastal Finish Weight: 27 lbs OPTICAL SYSTEM Lumens: 7,000 - 30,300 Photometry: Type II, III, IV & V Efficacy: 126 - 160 LPW CCT: 3000K, 4000K, 5000K CRI: 70 Upward Light Output Ration (ULOR): 0 Horizontal Orientation ELECTRICAL Input Voltage: 120-277V, 277-480V & 347-480V Input Frequency: 50/60 Hz Power Factor (PH): > 90% at rated watts Total Harmonic Distortion (THD): < 20% at rated watts SURGE PROTECTION 6kV/3kA* *Per ANSI C136.2-2015 TYPICAL (120 STRIKES) 10kV/5kA* 20kV/10kA* LUMEN MAINTENANCE Projected Lxx per IES TM-21-11 at 25°C Optics LXX(10K) @ Hours 25,000 HR 50,000 HR 60,000 HR C2, C3, C4, C5, D2, D3, D4, D5 L96 L92 L91 F5, H2, H3, H4, H5 L95 L93 L92 F2, F3, F4, J3, J3, J4, J5 L95 L93 L92 K2, K3, K4, K5 L95 L93 L92 Note: Projected Lxx based on LM80 (= 10,000 hour testing). Accepted Industry tolerances apply to initial luminous flux and lumen maintenance measurements LUMINAIRE AMBIENT TEMPERATURE FACTOR Ambient Temp (°C) 10 20 25 Initial Flux Factor 1.02 1.01 1.00 Ambient Temp (°C) 30 40 Initial Flux Factor 0.99 0.98 RATINGS Operating Temperature: -40° C to 40° C Vibration: 3G per ANSI C136.31-2010 LM-79: Testing in accordance with IESNA Standards CONTROLS Dimming: Standard - 0-10V Optional - DALI (Option U) Sensors: Photo Electric Sensors (PE) available LightGrid and Daintree Compatible WARRANTY 5 Year (Standard) 10 Year (Optional) Evolve® EALS Series LED Outdoor Area Light Catalog Logic CUSTOMER NAME Project Name Date Catalog Number Type Ordering Information E_ A_ _LS_ 0_3_ _ XS PRODUCT ID GENERATION VOLTAGE E= Evolve 03 01=120277 _ _ OPTICAL CODE Cx =7500 _ _ DISTRIBUTION SM = Symmetric Medium 7_ _ _ _ CRI CCT DIMMING² 7 = 70 (min) 3011 = 3000K N¹³ = Dimming thru PE receptacle _ _ _ ____ ___ CONTROLS MOUNTING ARM COLOR OPTIONS 1 = None C14 = Integral Slipfitter: Standard BLCK = Black F= Fusing AL= Area Light S = Standard H1 = 347480V Dx = 10000 SW = Symmetric Wide E1,9 = 277480 Fx = 15000 SH = Symmetric High Angle Hx = 20000 AF = Asymmetric Forward 1 = 120 Jx = 25000 AH = Asymmetric High Angle 40 = 4000K 50 = 5000K D¹³ = External Dimming 18/2 3 ft Cable X¹ = Non dimming, no external dimming leads A = ANSI C136.41 7-Pin Receptacle (No Control) D = ANSI C136.417-Pin Receptacle with Shorting Cap E3 = ANSI C136.41 7-pin with Non-Dimming PE Control D15 = Universal Mounting Arm: Fitted for round or square pole mounting K14, 6 = Knuckle Slipfitter: For 1.9 in. - 2.3 in OD Tenon S14, 6 = Knuckle Slipfitter: For 2.3 in. - 3.0 in OD Tenon V14, 6 = Knuckle Wall Mount DKBZ = Dark Bronze GRAY = Gray WHTE = White H8 = Motion Sensor (Sensor Switch) H1 = LightGrid w/ WattStopper H28 = Daintree enabled motion sensor H4 = Motion Sensor (WattStopper) 2 = 208 Kx = 30000 AW = Asymmetric Wide J = cUL/Canada 3 = 240 4 =277 D = 347 AN = Asymmetric Narrow/Auto L = Tool-Less Entry R = Enhanced Surge Protection (10kV/5kA) S1¹² = Rotated Left 5 = 480 ¹ Not Available with Fusing, Must Choose a Discrete Voltage with "F" Option Code ² Note Standard Dimming is 0-10V ³ PE Control only available for 120-277V, 347V or 480V Discrete Voltage. Supplied with 3ft leads Supplied with 16/3 ft Cable Restricted Aiming Angle of 0-45° Compatible with LightGrid Wireless Control Nodes, Not Compatible with Motion Sensor Control Not available in 347V, 480V or 347-480V Only available with H, J & K optics 10 Recommended for installations within 750 feet from coast. Lead time varies, check with factory. 11 Select 3000K CCT for IDA approved fixtures. ¹² For aimed left of right light distribution orientation, as assembled in manufacturing. Not applicable for Symmetric Distributions ¹³ Can only be ordered with controls A, D, and E ¹ Required for Cx optical codes only, not available for other optic codes S2¹² = Rotated Right T = Extreme Surge Protection (20kV/10kA) U 7, 8 = DALI Programmable V = 3 Position Terminal Block Y10 = Coastal Finish XXX = Special Options Pole Left (S1) Pole Right (S2) Evolve® EALS Series LED Outdoor Area Light Spec Tables CUSTOMER NAME Project Name Date Catalog Number Type TYPE OPTIC CODE DISTRIBUTION C5 Symmetric Medium (SM) D5 Symmetric Medium (SM) F5 Symmetric Medium (SM) H5 Symmetric Medium (SM) J5 Symmetric Medium (SM) K5 Symmetric Medium (SM) C5 Symmetric Wide (SW) D5 Symmetric Wide (SW) F5 TYPE V H5 Symmetric Wide (SW) Symmetric Wide (SW) J5 Symmetric Wide (SW) K5 Symmetric Wide (SW) C5 Symmetric High Angle (SH) D5 Symmetric High Angle (SH) F5 Symmetric High Angle (SH) H5 Symmetric High Angle (SH) J5 Symmetric High Angle (SH) K5 Symmetric High Angle (SH) C4 Asymmetric Forward (AF) D4 Asymmetric Forward (AF) F4 Asymmetric Forward (AF) H4 Asymmetric Forward (AF) J4 Asymmetric Forward (AF) K4 TYPE IV C4 Asymmetric Forward (AF) Asymmetric High Angle (AH) D4 Asymmetric High Angle (AH) F4 Asymmetric High Angle (AH) H4 Asymmetric High Angle (AH) J4 Asymmetric High Angle (AH) K4 Asymmetric High Angle (AH) C3 Asymmetric Wide (AW) D3 Asymmetric Wide (AW) F3 TYPE III H3 Asymmetric Wide (AW) Asymmetric Wide (AW) J3 Asymmetric Wide (AW) K3 Asymmetric Wide (AW) C2 Asymmetric Narrow/Auto (AN) D2 Asymmetric Narrow/Auto (AN) F2 Asymmetric Narrow/Auto (AN) TYPE II H2 Asymmetric Narrow/Auto (AN) J2 Asymmetric Narrow/Auto (AN) K2 Asymmetric Narrow/Auto (AN) TYPICA L INITIAL LUMENS 3000K 7300 9800 14700 19600 24500 29400 7300 9800 14700 19700 24600 29600 7000 9400 14200 18900 23600 28400 7300 9800 14700 19600 24500 29400 7000 9400 14200 18900 23600 28400 7300 8900 14700 19800 24600 29600 7300 9800 14700 19700 24600 29600 4000K & 5000K 7500 10000 15000 20000 25000 30000 7500 10100 15100 20200 25200 30300 7200 9600 14500 19300 24100 29000 7500 10000 15000 20000 25000 30000 7200 9600 14500 19300 24100 29000 7500 10100 15100 20200 25200 30300 7500 10100 15100 20200 25200 30300 TYPICAL SYSTEM WATTAGE BUG RATINGS 3000K 4000 & 5000K 120-277 & 347-480V B-U-G B-U-G 46 B3-U0-G1 B3-U0-G1 64 B3-U0-G1 B3-U0-G1 101 B4-U0-G2 B4-U0-G2 140 B4-U0-G2 B4-U0-G2 186 B4-U0-G2 B4-U0-G2 239 B5-U0-G3 B5-U0-G3 46 B2-U0-G1 B2-U0-G1 64 B3-U0-G1 B3-U0-G1 101 B3-U0-G2 B3-U0-G2 140 B4-U0-G2 B4-U0-G2 186 B4-U0-G2 B4-U0-G2 239 B5-U0-G2 B5-U0-G2 46 B3-U0-G1 B3-U0-G1 64 B3-U0-G2 B3-U0-G2 101 B4-U0-G2 B4-U0-G2 140 B4-U0-G2 B4-U0-G2 186 B5-U0-G3 B5-U0-G3 239 B5-U0-G3 B5-U0-G3 50 B1-U0-G2 B1-U0-G2 70 B2-U0-G2 B2-U0-G2 116 B2-U0-G2 B2-U0-G2 140 B3-U0-G3 B3-U0-G3 186 B3-U0-G3 B3-U0-G3 239 B3-U0-G4 B3-U0-G4 50 B2-U0-G2 B2-U0-G2 70 B2-U0-G2 B2-U0-G2 116 B3-U0-G3 B3-U0-G3 140 B3-U0-G3 B3-U0-G4 186 B3-U0-G4 B3-U0-G4 239 B3-U0-G4 B3-U0-G4 50 B2-U0-G1 B2-U0-G1 70 B2-U0-G2 B2-U0-G2 116 B2-U0-G2 B2-U0-G2 140 B3-U0-G2 B3-U0-G3 186 B3-U0-G3 B3-U0-G3 239 B3-U0-G3 B3-U0-G3 50 B3-U0-G2 B2-U0-G2 70 B2-U0-G2 B2-U0-G2 116 B2-U0-G2 B3-U0-G3 140 B3-U0-G3 B3-U0-G3 186 B3-U0-G3 B3-U0-G3 239 B3-U0-G3 B3-U0-G3 For additional information on EALS files, please click one of the following links: Non-Shielded Shielded Evolve® EALS Series LED Outdoor Area Light Photometric Plots EALS03 ASYMMETRIC NARROW (K2AN750) 30300 Lumens 5000k EALS03_K2AN750________.IES CUSTOMER NAME Project Name Date Catalog Number Type ----------: Vertical plane through horizontal angle of maximum candlepower at 55° ----------: Vertical plane through horizontal angle 34° EALS03 ASYMMETRIC WIDE (K3AW750) 30300 Lumens 5000k EALS03_K3AW750________.IES Gridline spacing is equal to mounting height. Initial footcandle values shown are at grade for 40' mounting height. ----------: Vertical plane through horizontal angle of maximum candlepower at 45° ----------: Vertical plane through horizontal angle 58° EALS03 ASYMMETRIC FORWARD (K4AF750) 30000 Lumens 5000k EALS03_K4AF750________.IES Gridline spacing is equal to mounting height. Initial footcandle values shown are at grade for 40' mounting height. ----------: Vertical plane through horizontal angle of maximum candlepower at 20° ----------: Vertical plane through horizontal angle 58° EALS03 ASYMMETRIC HIGH ANGLE (K4AH750) 29000 Lumens 5000k EALS03_K4AH750________.IES Gridline spacing is equal to mounting height. Initial footcandle values shown are at grade for 40' mounting height. ----------: Vertical plane through horizontal angle of maximum candlepower at 45° ----------: Vertical plane through horizontal angle 70° Gridline spacing is equal to mounting height. Initial footcandle values shown are at grade for 40' mounting height. Evolve® EALS Series LED Outdoor Area Light Photometric Plots EALS03 SYMMETRIC HIGH ANGLE (K5SH750) 29000 Lumens 5000k EALS03_K5SH750________.IES CUSTOMER NAME Project Name Date Catalog Number Type ----------: Vertical plane through horizontal angle of maximum candlepower at 50° ----------: Vertical plane through horizontal angle 69° EALS03 SYMMETRIC MEDIUM (K5SM750) 30000 Lumens 5000k EALS03_K5SM750________.IES Gridline spacing is equal to mounting height. Initial footcandle values shown are at grade for 40' mounting height. ----------: Vertical plane through horizontal angle of maximum candlepower at 45° ----------: Vertical plane through horizontal angle 65° EALS03 SYMMETRIC WIDE (K5SW750) 30300 Lumens 5000k EALS03_K5SW750________.IES Gridline spacing is equal to mounting height. Initial footcandle values shown are at grade for 40' mounting height. ----------: Vertical plane through horizontal angle of maximum candlepower at 50° ----------: Vertical plane through horizontal angle 55° Gridline spacing is equal to mounting height. Initial footcandle values shown are at grade for 40' mounting height. Evolve® EALS Series LED Outdoor Area Light Motion Sensing CUSTOMER NAME Project Name Date Catalog Number Type H-MOTION SENSING OPTION · Recommended Mounting Height: 15-30' (4.6-9.1m) · For mounting heights exceeding 30 ft., pole mounted sensors are recommended · Coverage Radius: 15-20' (4.6-6.1 m). · Provides 270 degree of coverage (approx 90 is blocked by the pole) · Default Settings: Output: Occupied - 100%/Unoccupied - 50% Integral PE Sensor. 5 minute post-occupancy time delay, 5 minute dimming rampdown. · Fixture power increase of 1W expected with sensor use. H1/4 - MOTION SENSING OPTION (WATTSTOPPER) · Recommended Mounting Height: 15-30' (4.6-9.1m) · For mounting heights exceeding 30 ft., pole mounted sensors are recommended · Coverage Radius: 15-20' (4.6-6.1 m). · Provides 270 degree of coverage (approx 90 is blocked by the pole) · Default Settings: Output: Occupied - 100%/Unoccupied - 50% PE Sensor: Enabled Ramp/Fade: 5 Minutes/5 Minutes · Adds < 1W to fixture power rating · Field programmable using FSIR-100 hand held programmer H2 - MOTION SENSING OPTION (DAINTREE) · Recommended Mounting Height: 15-30' (4.6-9.1m) · For mounting heights exceeding 30 ft., pole mounted sensors are recommended · Provides a coverage area radius for walking motion of 15-20 ft. (4.57-6.10m) · Provides 270 degree of coverage (approx 90 is blocked by the pole) · Default Settings: Output: Occupied - 100%/Unoccupied - 50% PE Sensor: None Ramp/Fade: 5 Minutes/5 Minutes · Adds < 1W to fixture power rating · Requires Daintree Enterprise and wide area control (WAC) 20' 10' 20' 10' 10' 10' 20' 20' Sensing Pattern Area Fixture Up to 30 ft. Mounting Height Evolve® EALS Series LED Outdoor Area Light Mounting & Accessories INTEGRAL SLIPFITTER: C1 25.2 in. [641 mm] CUSTOMER NAME Project Name Date Catalog Number Type 16.0 in. [405 mm] 14.7 in. [373 mm] TOP VIEW R11.465 in. [R291 mm] KNUCKLE SLIPFITTER: S1 SIDE VIEW 4.3 in. [109 mm] 1.9 in. [48 mm] FRONT VIEW 10.0 in. [254 mm] TOP VIEW R11.465 in. [R291 mm] 1.9 in. [48 mm] 4.3 in. [109 mm] KNUCKLE SLIPFITTER ARM MOUNT 0° TO 45° AIMING RANGE Evolve® EALS Series LED Outdoor Area Light Mounting & Accessories UNIVERSAL ARM MOUNT: D1 27.9 in. [709 mm] 2.7 in. [68 mm] CUSTOMER NAME Project Name Date Catalog Number Type 4.4 in. [112 mm] 1.3 in. [33 mm] TOP VIEW 1.8 in. [44 mm] MIN 6.4 in. 7.7 in. [162 mm] MAX [197 mm] 2.5 in. [63 mm] SQUARE POLE MIN R11.465 in. [R291 mm] BACK VIEW SIDE VIEW 1.9 in. [48 mm] 4.3 in. [109 mm] FRONT VIEW KNUCKLE WALL MOUNT: V1 6.1 in. [155 mm] 30.5 in. [775 mm] 4.375 in. [111 mm] Ø.438 in. [Ø11mm] 2.874 in. [73 mm] TOP VIEW Wall Mount Hole Pattern BACK VIEW R11.465 in. [R291 mm] 4.3 in. [109 mm] 1.9 in. [48 mm] SIDE VIEW FRONT VIEW DATA · Approximate Net Weight: 26-28 lbs (11.79 kgs-12.97 kgs) · Effective Projected Area (EPA): Knuckle Slipfitter S1, 45° aim, EPA = 2.45 Knuckle w/Slipfitter S1, downward aim, EPA = 0.73 Universal Arm Mount D1, EPA = 0.54 - Knuckle Wall Mount V1, 45° aim, EPA = 0.77 sq ft min and 1.43 sq ft max Integral Slipfitter C1, EPA = 0.63 Evolve® EALS Series LED Outdoor Area Light Mounting & Accessories CUSTOMER NAME Project Name Date Catalog Number Type MOUNTING ARMS FOR SLIPFITTER Order separately with Mounting Option C1 (Slipfitter) SQUARE POLE MOUNTING ARM 3.5 TO 4.5-inch (89 to 114mm) SQUARE (WILL ALLOW 4 FIXTURES PER POLE @ 90 DEGREES.) [21607.5m00mi]n. ORDER SEPARATELY FROM FIXTURE AS CATALOG NUMBER SPA-EAMT10BLCK "Black" SPA-EAMT10DKBZ "Dark Bronze" SQUARE POLE MOUNTING DRILLING TEMPLATE 5.250 in. [133 mm] Ø.750 in. [Ø19 mm] 1.312 in. [33 mm] Ø.438 in. [Ø11 mm] (2 Places) 2.196 in. [56 mm] 4.392 in. [112 mm] 0.656 in. [17 mm] ROUND POLE MOUNTING ARM DRILLING TEMPLATE 3.5 TO 4.5-inch (89 to 114mm) OD (WILL ALLOW 4 FIXTURES PER POLE @ 90 DEGREES.) [21607.5m00mi]n. ORDER SEPARATELY FROM FIXTURE AS CATALOG NUMBER RPA-EAMT10BLCK "Black" RPA-EAMT10DKBZ "Dark Bronze" Wall Mounting Bracket Adapter Plate ORDER SEPARATELY FROM FIXTURE AS CATALOG NUMBER WMB-EAMT06 ROUND POLE MOUNTING DRILLING TEMPLATE 3.5 TO 4.5-inch (89 to 114mm) OD round pole mounting arm .312 in. DIA. [8 mm DIA.] .438 in. DIA. 5.250 in. [133 mm [11 mm DIA.] (2 Places) MIN.] 1.812 in. [46 mm] .750 in. DIA. 5.438 in. 2.719 in. [138 mm] [69 mm] [19 mm DIA.] Hole Contact manufacturing for other available mounting patterns. SAP NUMBER PART NUMBER 93123552 WANSI - 277 93123553 WANSI - 480 93029237 PED-MV-LED-7 93029238 PED-347-LED-7 93029239 PED-480-LED-7 PE Accessories (to be ordered separately) DESCRIPTION ANSI 136.41 Dimming PE Daintree Enable, 105-305V ANSI 136.41 Dimming PE Daintree Enable, 312-530V ANSI C136.41 Dimming PE, 120-277V ANSI C136.41 Dimming PE, 347V ANSI C136.41 Dimming PE, 480V SAP NUMBER 28299 28294 80436 93147530 73251 PART NUMBER PECOTL PEC5TL PECDTL PECHTL SCCL-PECTL DESCRIPTION Standard 120-277V Standard 480V Standard 347V Long Life Standard PE, 347-480V Shorting Cap www.gecurrent.com © 2022 Current Lighting Solutions, LLC. All rights reserved. GE and the GE monogram are trademarks of the General Electric Company and are used under license. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions. OLP3111 (Rev 3/4/22)