Hyundai Solar Modules & SolarEdge Inverters and Batteries
Comprehensive product information and technical specifications.
Hyundai Solar Module - DG Series
G12 PERC Shingled
Models: HiE-S410DG(FB), HiE-S415DG(FB), HiE-S420DG(FB), HiE-S425DG(FB)
Key Features:
- Shingled Technology
- Suitable for Residential & Commercial Applications
- Enhanced Power Generation in Low Light
Detailed Features:
- G12 PERC Shingled Technology: Provides ultra-high efficiency and better performance in low irradiation, maximizing installation capacity in limited space.
- Anti-LID / PID: Strictly eliminates Light Induced Degradation (LID) and Potential Induced Degradation (PID) to ensure higher actual yield over the module's lifetime.
- Mechanical Strength: Features tempered glass and a reinforced frame design to withstand rigorous weather conditions, including heavy snow and strong winds.
- Reliable Warranty: Backed by a global brand with strong financial backing, offering a reliable 25-year ?️ Product Warranty (Australia and Europe only).
- Corrosion Resistant: Passed various tests under harsh environmental conditions, including ammonia (NH₃) and salt-mist (NaCl) exposure.
- UL / VDE Test Labs: Hyundai's R&D center is an accredited test laboratory for both UL and VDE.
Hyundai's Warranty Provisions:
- 25-Year ?️ Product Warranty: Covers material and workmanship (Australia and Europe Only).
- 25-Year ? Performance Warranty: Guarantees 98.0% in the first year, with a linear warranty after the second year, including 0.55% annual degradation, ensuring 84.80% is guaranteed up to 25 years.
About Hyundai Energy Solutions: Established in 1972, Hyundai Heavy Industries Group is a Fortune 500 company committed to renewable energy. Hyundai Energy Solutions provides high-quality PV products to over 3,000 customers worldwide.
Certifications: CE, PV CYCLE, TUV NORD, TIER 1.
Visit: www.hyundai-es.co.kr
Technical Specifications
| Electrical Characteristics | 410 | 415 | 420 | 425 |
|---|---|---|---|---|
| Nominal Output (Pmpp) [W] | 410 | 415 | 420 | 425 |
| Open Circuit Voltage (Voc) [V] | 41.4 | 41.5 | 41.6 | 41.7 |
| Short Circuit Current (Isc) [A] | 12.65 | 12.80 | 12.92 | 13.03 |
| Voltage at Pmax (Vmpp) [V] | 34.4 | 34.5 | 34.6 | 34.6 |
| Current at Pmax (Impp) [A] | 11.97 | 12.08 | 12.19 | 12.30 |
| Module Efficiency [%] | 20.6 | 20.9 | 21.1 | 21.4 |
| Cell Type | PERC Mono-Crystalline Silicon Shingled | |||
| Maximum System Voltage [V] | 1,500 | |||
| Temperature Coefficiency of Pmax [%/°C] | -0.34 | |||
| Temperature Coefficiency of Voc [%/°C] | -0.27 | |||
| Temperature Coefficiency of Isc [%/°C] | 0.04 | |||
Note: All data at STC (Standard Test Conditions). Tolerance of Pmax: 0~+5W. Performance deviation of Voc, Isc, Vm, Im: ±3%.
Mechanical Characteristics
- Dimensions: 1,812 × 1,096 × 30 mm (L × W × H)
- Weight: 20.8 kg
- Solar Cells: 305 Cells, PERC Mono-crystalline Shingled (210 × 210mm)
- Output Cables: 4mm², +500mm/-1100mm (Vertical), +220mm/-180mm (Horizontal)
- Junction Box: IP68, TUV&UL, two diodes, Connector: Stäubli MC4-Evo2
- Construction: Front Glass: AR Coated tempered glass, 3.2mm; Encapsulation: EVA (Ethylene-Vinyl-Acetate)
- Frame: Anodized Aluminum
Installation Safety Guide:
- Only qualified personnel should install or perform maintenance.
- Be aware of dangerous high DC voltage.
- Do not damage or scratch the rear surface of the module.
- Do not handle or install modules when they are wet.
Operating Parameters:
- Nominal Operating Cell Temperature: 42.3°C (±2°C)
- Operating Temperature: -40 ~ 85 °C
- Maximum System Voltage: DC 1,500 / 1,000 (IEC)
- Series Fuse Rating [A]: 25
- Maximum Surface Load Capacity: Front 5,400 Pa, Rear 2,400 Pa
Module Diagram: Shows the physical layout and dimensions of the solar module.
I-V Curves: Illustrate the relationship between current and voltage under varying irradiance and temperature conditions.
SolarEdge Home Wave Inverter
Single Phase, for Europe (2.2 – 6 kW)
Models: SE2200H, SE3000H, SE3500H, SE3680H, SE4000H, SE5000H, SE6000H
Warranty: 12-25 Year Warranty
Key Features:
- Optimized installation with HD-Wave technology.
- Specifically designed to work with SolarEdge Power Optimizers.
- Industry-leading efficiency with 200% DC oversizing.
- Quick and easy inverter commissioning directly from a smartphone using the SolarEdge SetApp.
- Seamless wireless connectivity with system devices like the SolarEdge Home Battery via the optional SolarEdge Home Network platform.
- Extremely compact, lightweight, and easy to install.
- Built-in module-level monitoring.
- Suitable for outdoor and indoor installation.
- Fixed voltage inverter for longer strings.
- Advanced safety feature: integrated arc fault protection.
Visit: solaredge.com
Technical Specifications
| Specification | SE2200H | SE3000H | SE3500H | SE3680H | SE4000H | SE5000H | SE6000H |
|---|---|---|---|---|---|---|---|
| Rated AC Power Output [VA] | 2200 | 3000 | 3500 | 3680 | 4000 | 5000(1) | 6000 |
| Maximum AC Power Output [VA] | 2200 | 3000 | 3500 | 3680 | 4000 | 5000(1) | 6000 |
| AC Output Voltage (Nominal) [Vac] | 220/230 | ||||||
| AC Output Voltage Range [Vac] | 184-264.5 | ||||||
| AC Frequency (Nominal) [Hz] | 50/60 ± 5 | ||||||
| Maximum Continuous Output Current [A] | 10 | 14 | 16 | 16 | 18.5 | 23 | 27.5 |
| Total Harmonic Distortion (THD) [%] | <3 | ||||||
| Power Factor | 1, adjustable -0.9 to 0.9 | ||||||
| Utility Monitoring, Islanding Protection, Configurable Power Factor, Country Configurable Thresholds | Yes | ||||||
| Maximum DC Power [W] | 4400 | 6000 | 7000 | 7360 | 8000 | 10000(2) | 12000 |
| Transformer-less, Ungrounded | Yes | ||||||
| Maximum Input Voltage [Vdc] | 480 | ||||||
| Nominal DC Input Voltage [Vdc] | 380 | ||||||
| Maximum Input Current [Adc] | 6.5 | 9 | 10 | 10.5 | 11.5 | 13.5 | 16.5 |
| Reverse-Polarity Protection | Yes | ||||||
| Ground-Fault Isolation Detection | 600kΩ Sensitivity per Unit | ||||||
| Maximum Inverter Efficiency [%] | 98.3 | 99.2 | 98.8 | 99 | 98.8 | 99.2 | 99 |
| European Weighted Efficiency [%] | 99 | ||||||
| Nighttime Power Consumption [W] | < 2.5 | ||||||
Additional Features:
- Supported Communication Interfaces: RS485, Ethernet, Wi-Fi (optional), wireless SolarEdge Home Network (optional), Cellular (optional), ZigBee (optional).
- Smart Energy Management: Export Limitation.
- Inverter Commissioning: Via the SetApp mobile application using built-in Wi-Fi station for local connection.
- Arc Fault Protection: Integrated, User Configurable (According to UL1699B).
Standard Compliance: Safety (IEC-62109-1/2), Grid Connection Standards (various EN, VDE, G98, G99, etc.), Electromagnetic Compatibility (EMC) (EN/IEC 61000 series, EN 55011, FCC Part 15).
Installation Specifications:
- AC Output - Supported Cable Diameter: 9-16 mm
- AC - Supported Wire Cross Section: 1-13 mm²
- DC Input: 1 x MC4 (SE2200H-SE4000H), 2 x MC4 pair (SE5000H-SE6000H)
- Dimensions (H x W x D): 280 x 370 x 142 mm
- Noise: < 25 dBA
- Weight: 7.8 kg (SE2200H-SE3680H), 9 kg (SE4000H-SE5000H), 10.6 kg (SE6000H)
- Cooling: Natural Convection
- Operating Temperature Range: -40 to +60 °C
- Protection Rating: IP65 - Outdoor and Indoor
Notes: (1) 4600VA in Germany. (2) 7130VA in Germany. (3) Refer to SolarEdge Energy Net Plug-in datasheet for more info. (4) Full power up to at least 50°C. Refer to SolarEdge temperature de-rating note for details.
SolarEdge Power Optimizer
For Residential Installations
Models: S440, S500
Warranty: 25 Year Warranty
Key Features:
- Enables PV power optimization at the module level.
- Specifically designed to work with SolarEdge residential inverters.
- Detects abnormal PV connector behavior, preventing potential safety issues*.
- Module-level voltage shutdown for installer and firefighter safety.
- Superior efficiency (99.5%).
- Mitigates all types of module mismatch loss, from manufacturing tolerance to partial shading.
- Faster installations with simplified cable management and easy assembly using a single bolt.
- Flexible system design for maximum space utilization.
- Compatible with bifacial PV modules.
*Functionality subject to inverter model and firmware version.
Visit: solaredge.com
Technical Specifications
| Specification | S440 | S500 | UNIT |
|---|---|---|---|
| Rated Input DC Power [W] | 440 | 500 | W |
| Absolute Maximum Input Voltage (Voc) [Vdc] | 60 | ||
| MPPT Operating Range [Vdc] | 8-60 | ||
| Maximum Short Circuit Current (Isc) of Connected PV Module [Adc] | 14.5 | 15 | Adc |
| Maximum Efficiency [%] | 99.5 | 98.6 | % |
| Weighted Efficiency [%] | 98.6 | ||
| Overvoltage Category | II | ||
| Maximum Output Current [Adc] | 15 | ||
| Maximum Output Voltage [Vdc] | 60 | ||
| Safety Output Voltage per Power Optimizer [Vdc] | 1 | ||
| EMC | FCC Part 15 Class B, IEC61000-6-2, IEC61000-6-3, CISPR11, EN-55011 | ||
| Safety | IEC62109-1 (class II safety), UL1741 | ||
| Material | UL94 V-0, UV Resistant | ||
| RoHS | Yes | ||
| Fire Safety | VDE-AR-E 2100-712:2013-05 | ||
| Maximum Allowed System Voltage [Vdc] | 1000 | ||
| Dimensions (W x L x H) [mm] | 129 x 155 x 30 | ||
| Weight (including cables) [gr/lb] | 655 / 1.5 | ||
| Input Connector | MC4(2) | ||
| Input Wire Length [m] | 0.1 | ||
| Output Connector | MC4 | ||
| Output Wire Length [m] | (+) 2.3, (-) 0.10 | ||
| Operating Temperature Range [°C] | -40 to +85 | ||
| Protection Rating | IP68 / NEMA6P | ||
| Relative Humidity [%] | 0 - 100 | ||
PV System Design Using a SolarEdge Inverter:
| Specification | Single Phase HD-Wave | Three Phase | Three Phase for 277/480V Grid |
|---|---|---|---|
| Minimum String Length (Power Optimizers) | S440, S500: 8 | 16 | 18 |
| Maximum String Length (Power Optimizers) | 25 | 50 | 50 |
| Maximum Nominal Power per String [W] | 5700 | 11250(5) | 12750(6) |
| Parallel Strings of Different Lengths or Orientations | Yes | Yes | Yes |
Notes: (1) Rated power of module at STC will not exceed Power Optimizer Rated Input DC Power. Modules with up to +5% power tolerance are allowed. (2) For other connector types, contact SolarEdge. (3) For ambient temperature above +70°C, power de-rating is applied. (4) If inverter's rated AC power ≤ maximum nominal power per string, then max power per string can reach inverter's max input DC power. Refer to application note. (5) For 230/400V grid, up to 13,500W per string allowed if max power difference between strings is 2,000W. (6) For 277/480V grid, up to 15,000W per string allowed if max power difference between strings is 2,000W. (7) Mixing S-series and P-series Power Optimizers is not allowed in new installations.
SolarEdge Home Battery 400V
For Europe
Model: BAT-10K1P
Warranty: 10 Year Warranty
Key Features:
- Optimized for SolarEdge Home Wave Inverter and StorEdge Inverter technology.
- DC coupled battery featuring outstanding overall system efficiency, generating more energy for on-grid and backup power applications.
- Integrates seamlessly with the complete SolarEdge Home ecosystem using SolarEdge Home Network, offering a single source for warranty, support, and training.
- Enhanced safety with Rapid Shutdown, SafeDC™.
- Qualified by the latest and most stringent UL fire safety standard.
- Monitors and manages solar, storage, EV charging, and smart devices via a single app for optimized production, consumption, and backup power*.
- Simple plug and play installation with automatic SetApp-based configuration.
- Flexible installation: wall or floor mount, indoor or outdoor.
- Wireless communication to the inverter, reducing wiring, labor, and installation costs.
*Backup application requires an inverter with backup capability.
Visit: solaredge.com
Technical Specifications
| Specification | BAT-10K1PS0B-x2 | UNIT |
|---|---|---|
| Usable Energy (100% depth of discharge) [Wh] | 9700 | Wh |
| Continuous Output Power [W] | 5000 | W |
| Peak Output Power in Backup (for 10 seconds) [W] | 7500 | W |
| Peak Roundtrip Efficiency [%] | >94.5 | % |
| Warranty [Years] | 10 | Years |
| Voltage Range [Vdc] | 350-450 | Vdc |
| Compatible Inverters | SolarEdge Home Wave Inverter, StorEdge Single Phase Inverter with HD-Wave Technology | |
| Battery per Inverter | Up to 3(2) | |
| Communication Interfaces | Wireless and RS485(3) | |
| Certification | IEC 62619 (Cell, Battery), UN38.3 (Battery), IEC61000-6-1, IEC61000-6-2, IEC61000-6-3 (Emissions) | |
| Dimensions (W x H x D) [mm] | 790 x 1179 x 250 | mm |
| Weight [kg] | 119 | kg |
| Mounting | Floor(4) or wall mount(5) | |
| Operating Temperature [°C] | -10 to +50 | |
| Storage Temperature (more than 3 months) [°C] | -10 to +30 | |
| Storage Temperature (less than 3 months) [°C] | -30 to +60 | |
| Enclosure Protection | IP55 - indoor and outdoor | |
| Maximum Altitude [m] | 2000 | |
| Cooling | Natural convection | |
| Noise at 1m Distance [dBA] | <25 | |
Notes: (1) For warranty details, see the SolarEdge Home Battery Limited Warranty. (2) Installations with multiple batteries require branch connectors. (3) Using RS485 may reduce usable energy to 9500Wh. (4) Floor stand purchased separately. (5) Wall mount requires handles purchased separately. (6) Operating at extreme temperatures may void warranty.
Accessories:
- Floor stand (PN: IAC-RBAT-FLRSTD-01)
- Reusable lifting handles (PN: IAC-RBAT-HANDLE-01)
- Branch connector set (PN: IAC-RBAT-RWYCBL-01)
- SolarEdge Home Network Plug-in (See datasheet)
es.co.kr
HD현대에너지솔루션