PARKSIDE® Pipe Cutter and Deburrer
This manual provides operating instructions and warranty information for the Parkside pipe cutter and deburrer.
Product Description
The Parkside pipe tool is designed for use on soft copper, aluminum, and brass pipes with an outside diameter ranging from 3 mm to 35 mm.
Key Features:
- Suitable for soft copper, aluminum, and brass pipes.
- Designed for pipes with an outside diameter from Ø 3 mm to Ø 35 mm.
- Includes a fold-out file for deburring the cutting surface after cutting (Fig. C).
- Comes with a spare cutting wheel (Fig. D).
Warranty Information
Warranty Period: 3 years from the date of purchase.
The product is manufactured to strict quality guidelines and has been meticulously examined before delivery. In the event of material or manufacturing defects, you have legal rights against the retailer. These rights are not limited by the warranty detailed below.
Keep the original sales receipt as proof of purchase. Any damage or defects present at the time of purchase must be reported immediately after unpacking.
If the product exhibits any fault in materials or manufacture within 3 years of purchase, Parkside will repair or replace it free of charge at their discretion. The warranty period is not extended by a claim being granted, nor does it apply to replaced or repaired parts.
This warranty is void if the product has been damaged, used improperly, or not maintained correctly. The warranty covers material or manufacturing defects but does not cover parts subject to normal wear and tear (consumables like batteries, hoses, cartridges) or damage to fragile parts like switches or glass components.
Warranty Claim Procedure:
- Have the original sales receipt and item number (IAN 450945_2310) ready as proof of purchase.
- Locate the item number on the rating plate, engraving, front page of the manual, or a sticker on the product.
- Contact the listed service department by telephone or email if functional or other defects occur.
- Return the defective product postage-free to the provided service address, enclosing the proof of purchase and a written description of the defect and when it occurred.
Service Contact Information
- Great Britain: Tel: 0800 0569216, E-Mail: owim@lidl.co.uk
- Hungary: Tel: 0680021536, E-Mail: owim@lidl.hu
- Slovenia: Tel: 00386 (0) 80 080 917, E-Mail: infofon@lidl.si
- Czech Republic: Tel: 800600632, E-Mail: owim@lidl.cz
- Slovakia: Tel: 0800 008158, E-Mail: owim@lidl.sk
- Germany: Tel: 0800 5435 111, E-Mail: owim@lidl.de
- Austria: Tel: 0800 292726, E-Mail: owim@lidl.at
- Switzerland: Tel: 0800 562153, E-Mail: owim@lidl.ch
Additional Information
Service Address: OWIM GmbH & Co. KG, Stiftsbergstraße 1, 74167 Neckarsulm, GERMANY
Model No.: HG04830B
Version: 05/2024
For more information and support, visit www.lidl-service.com.
