tp-link Archer TX35U Plus High Gain Wireless USB Adapter User Guide

User Guide for tp-link models including: Archer TX35U Plus, Archer TX35U Plus High Gain Wireless USB Adapter, High Gain Wireless USB Adapter, Gain Wireless USB Adapter, Wireless USB Adapter, USB Adapter, Adapter

Archer TX35U Plus User Guide

TP-LINK CORPORATION PTE.LTD. TX35UPLUS AX1800 High Gain Wireless USB Adapter 2BCGWTX35UPLUS 2BCGWTX35UPLUS tx35uplus

TP-LINK CORPORATION PTE.LTD. TX35UPLUS 2BCGWTX35UPLUS 2BCGWTX35UPLUS tx35uplus

File Info : application/pdf, 21 Pages, 1.33MB

GetApplicationAttachment.html?id=7428610

User Guide
AX1800 High Gain Wireless USB Adapter Archer TX35U Plus
© 2024 TP-Link 1910013714 REV1.0.0

Contents
Chapter 1. About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Chapter 2. Get to Know About Your Adapter . . . . . . . . . . . . . . . . . . . . .3
1. 1. Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1. 2. LED Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Chapter 3. Use the Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
2. 1. Install Driver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2. 2. Join a Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2. 3. Uninstall Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Chapter 4. Appendix: Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . .7

About This Guide

This guide is a complement to Quick Installation Guide. The Quick Installation Guide instructs you on quick installation, and this guide provides the product overview and detailed instructions for each steps.
When using this guide, please notice that features available of the adapter may vary by model and software version. It may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual experience.

Conventions

In this guide, the following conventions are used:

Convention Description

Underlined

Underlined words or phrases are hyperlinks. You can click to redirect to a website or a specific section.

Teal

Contents to be emphasized and texts on the web page are in teal, including the menus, items, buttons, etc.

Note:

Ignoring this type of note might result in a malfunction or damage to the device.

Tips:

Indicates important information that helps you make better use of your device.

Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput , wireless coverage, and number of connected devices are not guaranteed and will vary as a result of network conditions, AP limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and AP location.
Use of Wi-Fi 6 (802.11ax), and features including OFDMA, MU-MIMO, and 1024QAM require APs to also support the corresponding features.
§Functionality of the adapter may be restricted on some operating systems and platforms. Please try to update the device's driver for feature compatibility. Use of WPA3 requires APs to also support the corresponding feature.
Actual network speed may be limited by the rate of the product's Ethernet WAN or LAN port, the rate supported by the network cable, Internet service provider factors and other environmental conditions.

More Info
· The latest driver can be found at Download Center at https://www.tp-link.com/support. · The Quick Installation Guide can be found where you find this guide or inside the package of the router. · Specifications can be found on the product page at https://www.tp-link.com. · A TP-Link Community is provided for you to discuss our products at https://community.tp-link.com. · Our Technical Support contact information can be found at the Contact Technical Support page at https://www.tp-link.com/support.
2

Chapter 1
Get to Know About Your Adapter
This chapter introduces what the adapter can do and shows its appearance. This chapter contains the following sections: · Product Overview · LED Status

Chapter 1

Get to Know about Your Adapter

1. 1. Product Overview
The latest Wi-Fi 6 standard guarantees extreme speeds, ultra-low latency, and uninterrupted connections. Archer TX35U Plus arms your PC with Wi-Fi 6 to ensure powerful, continuous signal reception, unlocking your Wi-Fi 6 router's full potential.
· Boosted Throughput with MU-MIMO - Works with MU-MIMO routers, which provide simultaneous data streams, boosting throughput and efficiency.
· Improved Security with WPA3 - The latest Wi-Fi security protocol provides enhanced protection in personal password safety.
· Boost Wi-Fi Reception Range - The high gain antennas combine with Beamforming to concentrate Wi-Fi signals towards your router for better reception and reliable connections from far away.

1. 2. LED Status

You can check the adapter's working status by following the LED explanation table.

Status On
Off

Indication
The driver has been installed successfully.
The driver is not installed. The adapter is not detected.

Chapter 1

Get to Know about Your Adapter

Tips: If the LED is off, try these troubleshooting tips: 1. Check if the adapter is recognized and enabled or not. Refer to Appendix: Troubleshooting for detailed
instructions. 2. Remove and reinsert the adapter. 3. Reinstall the software, if necessary.

Chapter 2
Use the Adapter
This chapter introduces how to install your adapter's driver, use your adapter to join a wireless network, and uninstall your adapter in a Windows system. The adapter is equipped with a Setup Wizard, which can guide you through the installation process. This chapter includes the following sections: · Install Driver · Join a Wireless Network · Uninstall Driver

Chapter 2

Use the Adapter

2. 1. Install Driver
1. Insert the adapter into a USB port on your computer. 2. Go to My Computer or This PC. 3. Double click the TP-Link CD-ROM then run SetupInstall.exe to install driver
SetupInstall.exe
Note: 1. If you cannot find the setup program, please download the driver at www.tp-link.com/support. 2. If an unknown publisher message pops up, select Yes to continue. 3. If Windows User Account Control requires admin credentials, type user name and password of
your Windows administrator account.
2. 2. Join a Wireless Network
You can join a wireless network via Windows built-in wireless utility. Follow the instructions below to use your computer system's built-in wireless utility: 1. Click the network icon on the taskbar (the icon might look like one of these:
, , , or ).
Network 6 Connected
TP-Link_XXXX Connect automatically
Connect Network settings

2. Select the Wi-Fi network you want to join, and click Connect. Enter the network password when prompted.
2. 3. Uninstall Driver
The software uninstallation steps vary a bit from different systems. Here we take the instructions for Windows 10 as an example. Go to Contol Pannel > Programs, click Uninstall a program, then double-click TPLink Archer TX35U Plus Driver, then follow the on-screen instructions to complete the uninstallation.
7

Appendix: Troubleshooting
T1. What should I do if the adapter is not detected?
· Make sure the adapter is securely connected to the computer. · Make sure you meet the minimum system requirements for the adapter and that the
latest Windows and system updates are installed on your computer. · Make sure you use the latest driver for your specific adapter. The latest drivers can
be found at https://www.tp-link.com/download-center. · Try a different USB port on the computer. · Try restarting the computer or try using the adapter on a different computer.
T2. How to check if I have installed the driver for my adapter successfully or not?
1. On your computer, please right click Computer icon and go to Manage;
2. Open the Device Manager and go to Network adapters, and then find the corresponding TP-Link adapter, right click it and then go to Properties;
8

3. If you can see "This device is working properly." in the red box, you have already installed the driver successfully.
T3. What should I do if can't connect to the Wi-Fi after installing the driver?
· Refer to T2 to check if you have installed the driver for your adapter successfully . · Make sure the adapter is securely connected to the computer. · Disable the antivirus software and firewall, then try again. · Try a different USB port on the computer. · Restart your computer and try again.
9

· Re-install the driver and try again.
T4. How to find the hardware version of the adapter?
· The hardware version is printed on the product label on the package or the adapter. There is a character string "Ver:X.Y" (for example, Ver:2.0) in the Serial Number field, and the number X is the hardware version of the adapter.
· Visit https://www.tp-link.com/faq-46.html and follow the second method to find the hardware version of the adapter.
For more detailed instructions:
· Can't find the hardware version of the adapter: https://www.tp-link.com/faq-46.html · Can't find or join the wireless networks: https://www.tp-link.com/faq-2253.html · Can't install the driver: https://www.tp-link.com/faq-2252.html
10

FCC compliance information statement
Product Name: AX1800 High Gain Wireless USB Adapter Model Number: Archer TX35U Plus Responsible party: TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 92618 Website: https://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected. · Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1 ) This device may not cause harmful interference. 2 ) This device must accept any interference received, including interference
that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment has been SAR-evaluated for use in hand. SAR measurements are based on a 5mm spacing from the body and that compliance is achieved at that distance.
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 24/06/17

CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
OPERATING FREQUENCY (the maximum transmitted power)
2400 MHz -2483.5 MHz(20dBm) 5150 MHz -5250 MHz(23dBm) 5250 MHz -5350 MHz (23dBm) 5470 MHz -5725 MHz (23dBm)
EU declaration of conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2011/65/ EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK declaration of conformity may be found at https://www.tp-link. com/support/ukca/
RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. This device has been tested and meets the ICNIRP exposure guidelines and the European Standard EN 62209-2. SAR is measured with this device at a separation of 0.5 cm to the body, while transmitting at the highest certified output power level in all frequency bands of this device. Carry this device at least 0.5 cm away from your body to ensure exposure levels remain at or below the as-tested levels.

National restrictions
Frequency band: 5150 - 5250 MHz: Indoor use: Inside buildings only. Installations and use inside road vehicles and train carriages are not permitted. Limited outdoor use: If used outdoors, equipment shall not be attached to a fixed installation or to the external body of road vehicles, a fixed infrastructure or a fixed outdoor antenna. Use by unmanned aircraft systems (UAS) is limited to within the 5170 - 5250 MHz band. Frequency band: 5250 - 5350 MHz: Indoor use: Inside buildings only. Installations and use in road vehicles, trains and aircraft are not permitted. Outdoor use is not permitted. Frequency band: 5470 - 5725 MHz: Installations and use in road vehicles, trains and aircraft and use for unmanned aircraft systems (UAS) are not permitted.
AT BE BG CH CY CZ DE DK EE EL ES FI FR HR HU IE IS IT LI LT LU LV MT NL NO PL PT RO SE SI SK UK(NI)
Attention: This device may only be used indoors in Great Britain.
UK
Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: 1 ) This device may not cause interference. 2 ) This device must accept any interference, including interference that may
cause undesired operation of the device. L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 1 ) l'appareil ne doit pas produire de brouillage; 2 ) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
meme si le brouillage est susceptible d'en compromettre le fonctionnement.

Caution:
1 ) The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
DFS (Dynamic Frequency Selection) products that operate in the bands 52505350 MHz, 5470-5600MHz, and 5650-5725MHz.
Avertissement:
1 ) Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;
Les produits utilisant la technique d'atténuation DFS (sélection dynamique des fréquences) sur les bandes 5250- 5350 MHz, 5470-5600MHz et 5650-5725MHz.
Radiation Exposure Statement:
This EUT is compliance with SAR for general population/uncontrolled exposure limits in RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528 and IEC 62209. This equipment should be installed and operated with minimum distance 0.5 cm between the radiator and your body. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
Déclaration d'exposition aux radiations :
Cet adaptateur est conforme au SAR pour la population générale/limites d'exposition non contrôlées dans RSS-102 et a été testé conformément aux méthodes et procédures de mesure spécifiées dans IEEE 1528 et CEI 62209. Cet équipement doit être installé et utilisé avec une distance minimale de 5 mm entre le radiateur et votre corps. Cet appareil et ses antennes ne doivent pas être situés ou fonctionner en conjonction avec une autre antenne ou un autre émetteur.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
Korea Warning Statements
.
NCC Notice

BSMI Notice
· · · · · ·

Archer TX35U Plus Equipment name

nit

AX1800 High Gain Wireless USB Adapter

Type designation (Type)

Cr+6

PBB

PBDE

PCB

1."0.1wt%""0.01wt%"

2. ""

Safety Information
· Keep the device away from water, fire, humidity or hot environments.
· Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
· Do not use the device where wireless devices are not allowed.
· This equipment can be powered only by equipments that comply with Power Source Class 2 (PS2) or Limited Power Source (LPS) defined in the standard of IEC 62368-1.
· This product uses radios and other components that emit electromagnetic fields. Electromagnetic fields and magnets may interfere with pacemakers and other implanted medical devices. Always keep the product and its power adapter more than 15 cm (6 inches) away from any pacemakers or other implanted medical devices. If you suspect your product is interfering with your pacemaker or any other implanted medical device, turn off your product and consult your physician for information specific to your medical device.
Operating Temperature: 0°C~40°C (32°F ~104°F) Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Explanation of the symbols on the product label
Symbols may vary from products.

Symbol

Explanation

Class II equipment

Class II equipment with functional earthing

Alternating current

Direct current Polarity of of d.c. power connector Indoor use only Dangerous voltage Caution, risk of electric shock Energy efficiency Marking Protective earth
Earth
Frame or chassis
Functional earthing Caution, hot surface Caution Operator's manual Stand-by "ON"/"OFF" (push-push) Fuse Fuse is used in neutral N

RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.
Caution, avoid listening at high volume levels for long periods

Disconnection, all power plugs

Switch of mini-gap construction

Switch of micro-gap construction (for US version)

Switch of micro-gap / micro-disconnection construction (for

other versions except US)

Switch without contact gap (Semiconductor switching device)

References

Adobe PDF Library 15.0 Adobe InDesign 15.0 (Windows)