Canopia Dallas Gazebo Curtain & Netting Set Assembly Instructions

Important Information

IMPORTANT! Please read these instructions carefully before starting assembly. Keep these instructions in a safe place for future reference.

Visit www.canopia.com for more information.

Safety Advice

• Dispose of all plastic bags safely – keep them away from children's reach.
• Keep children away from the assembly area.
• When using a stepladder or power tools, make sure that you are following the manufacturer's safety advice.

Important Recommendations

• These instructions are compatible with Canopia's Dallas™ 12x14/3.6x4.3 | 12x16/3.6x5 | 12x20/3.6x6.
• Please carry out the steps in the order set out in these instructions.
• Keep these instructions in a safe place for future reference.

Before Assembly

1. This curtain / netting set includes 4 parts that cover the entire gazebo.
2. Please read these instructions carefully before you start to assemble this product.
3. Some of the steps may require the assistance of a second person.

During Assembly

Icons:

• ? This icon indicates that the installer should be inside the product.
• ? This icon indicates that the installer should be outside the product.
• When encountering these icons, you are requested to either keep the screws slightly loose or to fully tighten the screws.

Tools & Equipment

• Ladder ?
• Wrench (10 mm | 3/8") ?

Important Assembly Steps

ℹ️ When encountering this information icon during assembly, please refer to the relevant assembly step for important additional comments.

• Step 1-4: Do not attach hooks in the area marked with an X (see round view).
• Step 7-8: Tighten the nuts when the curtain stretched positioned around the post (see view b).
• Step 9: In assembling together curtain and netting, there will be excess strips (unused).
• When closed, the curtain / netting has to be stretched in order to properly maintain them.
• When opened, the curtain / netting should be tied to the poles with the built-in straps.
• In windy weather conditions, curtains need be pulled towards the post, as shown in step 10.
• Optional: It is possible to thread a curtain weight chain at the bottom.

Assembly Components

Set Curtain (706596) (706598) (706600)

• 2x Curtain Panels
• 8x Hooks
• 4x Fasteners
• 8x Small Fasteners
• 8x Small Fasteners

Set Netting (706597) (706599) (706601)

• 2x Netting Panels
• 8x Hooks
• 4x Fasteners
• 8x Small Fasteners
• 8x Small Fasteners

Assembly Steps

Step 1: For Netting

1a. Do not attach hooks in the area marked with an X.

1b. Attach hooks as shown.

Step 2: For Netting

2a. Do not attach hooks in the area marked with an X.

2b. Attach hooks as shown.

Step 3: For Curtain

3a. Do not attach hooks in the area marked with an X.

3b. Attach hooks as shown.

Step 4: For Curtain

4a. Do not attach hooks in the area marked with an X.

4b. Attach hooks as shown.

Step 5: Identifying Curtain Panels

X = Long (L) / Short (S) Panels

Y = Long (L) / Short (S) Panels

Diagram showing the placement of Long (L) and Short (S) panels on the gazebo frame.

Step 6: Attaching Hooks

For Curtain: Attach hooks to the designated slots.

For Netting: Attach hooks to the designated slots.

Step 7: For Curtain

Tighten the nuts when the curtain is stretched around the post.

Step 8: For Netting

Tighten the nuts when the netting is stretched around the post.

Step 9: Securing Open Curtains/Nettings

When curtains/nettings are closed, they must be taut for proper maintenance.

When curtains/nettings are open, tie them to the poles using the built-in straps.

In windy conditions, pull curtains towards the post as shown in step 10.

Optional: A curtain weight chain can be threaded at the bottom.