T10 2.1CH Soundbar with Subwoofer

Introduction

This user manual provides information for the T10 2.1CH Soundbar with Subwoofer. The product is guaranteed for one year from the date of purchase. For any questions, please contact the manufacturer.

Important Safety Instructions

To prevent electric shock or fire hazards and ensure safe operation, please read and observe the following safety instructions before installing and using the unit. Keep these instructions for future reference.

General Precautions

• Read all instructions.
• Keep all instructions.
• Heed all warnings.
• Follow all instructions.

Installation and Environment

• Do not install near water sources. Clean only with a dry cloth.
• Ensure proper ventilation: Do not block ventilation openings. Install in accordance with manufacturer's instructions. Avoid heat sources like radiators or stoves. Do not place in enclosed cabinets without adequate ventilation. Allow 1-2 inches of space around subwoofer ports.
• Avoid extreme conditions: Do not install in areas with heavy dust or high humidity.
• Condensation: If moving the unit from a cold to a warm environment, allow it to acclimate before turning it on to prevent damage.

Electrical Safety

• Power Cord: Protect the power cord from being walked on or pinched. Only use attachments specified by the manufacturer.
• Grounding: Do not defeat the safety purpose of polarized or grounding-type plugs. Consult an electrician for outlet replacement if the plug does not fit.
• Unplugging: Unplug the apparatus during lightning storms or when unused for long periods. Unplug the power cord before cleaning. When unplugging, hold the power plug, not the cord.
• Water Contact: If liquid penetrates the unit, unplug immediately and contact a dealer. Do not use if wet.
• Overloading: Do not overload power strips and extension cords.
• Wet Hands: To reduce the risk of electric shock, do not touch connectors with wet hands.

Operation and Maintenance

• Servicing: Refer all servicing to qualified service personnel. Servicing is required if the apparatus is damaged, exposed to liquid, does not operate normally, or has been dropped.
• Cleaning: Unplug the power cord before cleaning. Use a damp cloth. Do not use liquid or spray cleaners or abrasive cleaners.
• Objects: Never push any object into the slots and openings. Do not place objects on top of the unit.
• Damaged Appliances: Avoid using dropped or damaged appliances. If the unit is dropped and housing is damaged, unplug immediately and contact a dealer.
• Abnormalities: If smoke or odor becomes apparent, unplug the power cord and contact a dealer immediately. Do not attempt self-repair.

Hearing Safety

• ⚡ WARNING: Exposure to loud sounds can damage hearing, causing hearing loss and tinnitus.

Battery Safety

• Insert remote control batteries according to instructions. Incorrect polarity may cause leaks.
• Replace batteries only with the same or specified type.
• Do not disassemble batteries or dispose of them in fire.
• Do not leave batteries exposed to direct sunlight in closed environments.

Symbols Explanation

• ⚡ [High Voltage Warning]: The lightning flash with arrowhead symbol within an equilateral triangle alerts users to the presence of non-isolated dangerous voltage within the product that may be sufficient to constitute a risk of shock.
• ❗ [Important Information]: The exclamation point within an equilateral triangle alerts users to the presence of important operating and servicing instructions in the literature accompanying the appliance.

Disconnect Device

• Where the MAINS plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

Apparatus Warnings

• WARNING: This equipment is not waterproof. To prevent fire or shock hazard, do not place liquid-filled containers near the equipment or expose it to dripping, splashing, rain, or moisture.
• CAUTION! RISK OF ELECTRIC SHOCK. DO NOT OPEN.
• TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
• This equipment is a Class II or double-insulated electrical appliance. It does not require a safety connection to electrical earth.

What's in the Box

• Soundbar x 1
• Subwoofer x 1
• HDMI (ARC) cable x 1
• 3.5mm to RCA audio cable x 1
• Optical cable x 1
• AC power cord x 1
• Mounting template x 1
• Remote control x 1
• Screws bag x 1
• User Manual x 1
• Quick Start Guide x 1

Product Overview

The T10 is a 2.1 channel soundbar system designed to enhance your audio experience. It includes a soundbar and a separate subwoofer for deep bass reproduction.

Soundbar Connections

The soundbar features several input ports on its rear panel for connecting various audio sources:

• HDMI ARC: For connecting to a TV via HDMI with Audio Return Channel support.
• Optical: For digital audio connection from a TV or other audio source.
• AUX: A 3.5mm analog audio input for connecting devices like smartphones or MP3 players.
• DC IN: Port for connecting the AC power adapter.

Remote Control

The included remote control allows for convenient operation of the soundbar system. Key functions typically include:

• Power: Turns the soundbar on or off.
• Volume Control: Adjusts the soundbar's volume up or down.
• Mute: Silences the audio output.
• Source Select: Cycles through available input sources (Bluetooth, HDMI ARC, Optical, AUX).
• Bluetooth: Activates Bluetooth pairing mode.
• EQ Modes: Selects preset equalization modes (e.g., Movie, Music, Bass).
• Playback Controls: Play/Pause, Previous Track, Next Track for Bluetooth audio playback.

Technical Specifications

Compliance Information

This product complies with relevant regulatory standards:

• FCC Compliant [FCC]
• CE Certified [CE]
• RoHS Compliant [RoHS]
• Supports Bluetooth connectivity ? [Bluetooth]

Manufacturer: Shenzhen Zhuoyou Technology Co., Ltd.