IKEA UTVISNING Desk Assembly Instructions

Model: UTVISNING

Product Code: AA-2476264-2

Parts List

Part Number	Description	Quantity
113142	Screw	7x
122341	Screw	4x
100498	Screw	4x
10120453	Screw	8x
115461	Screw	11x
117327	Screw	2x
100092	Allen Key	1x
100002	Handle	2x
148816	Gear Mechanism	4x
103430	Adjustable Foot	4x
100843	Washer	4x
190015	Dowel/Insert	7x
100600	Knob/Part of Handle Mechanism	8x
100610	Knob/Part of Handle Mechanism	8x
10035912	Side Panel	4x
10080238	Adhesive Pad	8x
128632	Wrench	1x

Assembly Steps

Step 1

Place the main desk surface upside down on a protective surface. Attach the metal brackets using 3x screws (115461) and the Allen key (100092).

Step 2

Apply 8x adhesive pads (10080238) to the back of the two hooks. Attach the hooks to the horizontal bar.

Step 3

Attach the horizontal bar with hooks to the desk frame.

Step 4

Insert 7x dowels/inserts (190015) into the frame. Attach the vertical support pieces using 7x screws (113142) and the Allen key (100092).

Step 5

Slide 2x side panels (10035912) into the designated slots on the desk frame.

Step 6

Secure the desk legs/supports using 2x screws (122341), 2x washers (100843), and the wrench (128632).

Step 7

Attach small brackets to the desk frame using 2x screws (117327).

Step 8

Attach the vertical supports to the desk frame using 2x screws (115461).

Step 9

Attach the remaining vertical supports to the desk frame using 2x screws (115461).

Step 10

Attach the supports for the top shelf using 4x screws (115461).

Step 11

Attach the top shelf to the supports using 4x screws (100498).

Step 12

Screw 4x adjustable feet (103430) into the bottom of the desk legs.

Step 13

Attach vertical supports to the base.

Step 14

Install the remaining 4x adjustable feet (103430).

Step 15

Slide 2x side panels (10035912) into the designated slots on the desk frame.

Step 16

Secure the desk legs/supports using 2x screws (122341), 2x washers (100843), and the wrench (128632).

Step 17

Attach 4x gear mechanisms (148816) to the vertical supports.

Step 18

Attach the desk legs to the main frame.

Step 19

Assemble and attach the height adjustment mechanisms. Use 8x screws (10120453), 8x knobs/parts (100600, 100610), and 2x handles (100002).

Step 20

Adjust the desk height by rotating the 4x adjustable feet (103430).

Step 21

Place a computer tower on the desk. Ensure the tower dimensions do not exceed: Max Height 50 cm (19 5/8"), Max Width 25 cm (9 7/8"), Max Depth 45 cm (17 3/4").

Step 22

Attach 2x cable management clips/straps to the desk frame.

Step 23