SENECA | Automation Interfaces | Official Website
Instruction Manual for SENECA models including: VPN BOX 2, VPN BOX 2 IoT Server Connectivity Module, IoT Server Connectivity Module, Server Connectivity Module, Connectivity Module, Module, VPN BOX 2 Server Connectivity Module
VPN BOX | LET'S - Module de connectivité serveur IoT | SENECA
File Info : application/pdf, 2 Pages, 179.23KB
DocumentDocumentINSTALLATION MANUAL VPN BOX 2 PRELIMINARY WARNINGS The word WARNING preceded by the symbol indicates conditions or actions that put the user's safety at risk. The word ATTENTION preceded by the symbol indicates conditions or actions that might damage the instrument or the connected equipment. The warranty shall become null and void in the event of improper use or tampering with the module or devices supplied by the manufacturer as necessary for its correct operation, and if the instructions contained in this manual are not followed. WARNING: The full content of this manual must be read before any operation. The module must only be used by qualified electricians. Specific documentation is available via QR-CODE shown on page 1. The module must be repaired and damaged parts replaced by the Manufacturer. The product is sensitive to electrostatic discharges. Take appropriate measures during any operation. Electrical and electronic waste disposal (applicable in the European Union and other countries with recycling). The symbol on the product or its packaging shows the product must be surrendered to a collection centre authorized to recycle electrical and electronic waste. DOCUMENTATION SENECA s.r.l.; Via Austria, 26 35127 PADOVA ITALY; Tel. +39.049.8705359 - Fax +39.049.8706287 CONTACT INFORMATION Technical support support@seneca.it Product information sales@seneca.it This document is the property of SENECA srl. Copies and reproduction are prohibited unless authorised. The content of this document corresponds to the described products and technologies. Stated data may be modified or supplemented for technical and/or sales purposes. MI00600-1-EN INSTALLATION MANUAL 1/2 MODULE LAYOUT 114 163 POWER SUPPLY LEFT SIDE FRONT Net weight: 1kg REAR TECHNICAL SPECIFICATIONS 52,7 VPN BOX 2 USB 3.0 LAN USB 3.0 USB 2.0 USB 2.0 A B REMOTE ON BUTTON OFF CERTIFICATIONS POWER SUPPLY ENVIRONMENTAL CONDITIONS IP ADDRESS OF FACTORY PROCESSOR CORE NUMBER COOLING MEMORY HARD DISK CASE I/O INTERFACE https://www.seneca.it/products/vpn-box-2/doc/CE_declaration 9 ÷ 36Vdc; 30 ÷ 40W max. Storage temperature: -20°C ÷ 70°C Operating temperature: 0°C ÷ 50°C The default IP address is configured in DHCP Intel® PentiumTM N4200 1.ProcessorClock: 1GHz Core: 4 Fanless 8GB DDR3L dual-channel SSD da 64GB Compact Fanless 1x VGA, 1x HDMI, 1x RJ45 (reserved), 1x RJ45 GbE LAN, 2x USB 3.0, 2x USB 2.0, ON/OFF button, 1x PWR LED, 1x HD ACT. LED Programming tools, app, manuals, templates, examples, etc. for the product can be downloaded free of charged at www.seneca.it in the product section. ELECTRICAL CONNECTIONS REMOTE BUTTON A B By means of the removable two-pole terminal, located on the back of the device, it is possible to install an external push-button for switching the device on and off, which can be controlled remotely also. MI00600-1-EN INSTALLATION MANUAL 2/2