User Manual for ems kontrol models including: KT-306, KT-346, KT-366, KT-306 Humidity and Carbon Dioxide Transmitter, KT-306, Humidity and Carbon Dioxide Transmitter
A a C B b c A 131 mm B 58 mm C 35 mm a 64 mm b 45 mm c 31mm 1 2 3 WHAT IS IT? Humdty and carbon doxde transmtter precsely measures relatve humdty and carbon doxde
Index of /wp-content/uploads/2025/01/
File Info : application/pdf, 2 Pages, 1.75MB
DocumentDocumentems kontrol HUMIDITY AND CARBON DIOXIDE TRANSMITTER KT-306/346/366 USER MANUAL CO2 www.emskontrol.com Product Code KT-306 KT-346 KT-366 Output S gnal 0-10 V 4-20 mA Modbus RTU kk-03.10 rev-2.9 / 30.09.24 1 WHAT IS IT? Hum d ty and carbon d ox de transm tter prec sely measures relat ve hum d ty and carbon d ox de values and outputs them as analog. HOW DOES IT WORK? It can operate w th a supply between 12 V DC and 24 V DC. Measurement values are taken from the analog output term nals and transferred to the des red locat on.. GENERAL FEATURES Accurate and Prec se Measur ng, Analog Output, Durable and Handy Des gn, Long Operat ng L fe, Cleanable F lter, Easy Assembl ng, IP 67 Plast c Case (Exclud ng Sensor) AREAS OF USE HVAC Appl cat ons, Poultry Automat on and Poultry Farms, Cold Storage, Incubat on Rooms, Food Storage, A r Cond t on ng Cab nets, Clean Rooms and Laborator es. RULES TO BE CONSIDERED FOR SAFETY 1- Always read the user manual before us ng the dev ce and ts apparatus. 2- Damages caused by open ng, break ng or m suse of the plast c parts of the dev ce and ts apparatus are cons dered out of warranty. 3- Keep the dev ce and ts apparatus away from external nfluences such as l qu d, h gh dust, h gh temperature, etc. and protect them. 4- Do not expose the dev ce cables to any jamm ng and pressure. 5- D sconnect the electr cal power when your dev ce s not used for a long t me. 6- Our dev ces and apparatus should be used by pay ng attent on to the po nts n the user manual. In case of damages and malfunct ons ar s ng from external use (l qu d contact, fall ng to the ground, etc.) ask for help from the serv ce. 7- Fa lures due to electr cal connect on errors and electr cal voltage or current errors are not covered by the warranty. S zes A 131 mm a A B 58 mm b C 35 mm c a 64 mm C b 45 mm c 31mm B 2 Techn cal Data Product Name: Supply Voltage: Hum d ty and Carbon D ox de Transm tter 12-24 V DC Output: 0-10 V / 4-20 mA / Modbus M. Range (Hum d ty): 0 - 100 % Prec s on (Hum d ty): ± % 1 Accuracy (Hum d ty): ± % 3 M. Range (CO2): Prec s on (CO2): Accuracy (CO2): 0-5.000 ppm / 0-10.000 ppm ± 10 ppm ± 50 ppm + %2 Operat ng Temperature: (-10°C) - (+55°C) Storage Temperature: (-20°C) - (+60°C) Protect on Class: IP 67 (Exclud ng Sensor) INSTALLATION 1- Unpack the product and open the top cover. 2- Make cable connect ons accord ngly. OUTPUT 1 OUTPUT 2 GND 24 VDC +- +- HUMIDITY CO2 -+ IN: VDC (12-24) 0-10 V / 4-20 mA W r ng D agram GND 24 VDC -+ IN: VDC (12-24) A B AB HUMIDITY-CO2 Modbus RTU W r ng D agram 3- If the product w ll be mounted on the wall, you can use the screws and dowels n the package. 4- It starts measur ng 30 seconds after the product s energ zed. It s recommended that the product rema ns n the env ronment for at least 5 m nutes to get healthy measurement values.. 5- It s recommended to use sh elded cable as commun cat on cable as t w ll prevent commun cat on s gnals from be ng affected by external nfluences. 6- S nce the commun cat on cable w ll create res stance, check the measurement values aga n after cable nstallat on. MODBUS RTU COMMUNICATION STRUCTURE RS485 Baud rate value n Modbus commun cat on s 9600 by default. Stop b t:1, Par ty: NONE. Default Slave ID s 87. Hum d ty value s kept n the hold ng reg ster at address 2 (40003) and carbon d ox de value s kept n the hold ng reg ster at address 3 (40004). Hum d ty and carbon d ox de nformat on can be obta ned by read ng these reg sters. Reg ster map and default values table: Reg ster Address Default Value Read Wr te M n. Max. Value Value Slave ID 0 (40001) 87 R/W 1 247 Baud rate 1 (40002) 3 R/W 0 8 Hum. Val. 2 (40003) - R - - CO2 Val. 3 (40004) - R - - 3 Slave ID and Baud rate can be changed v a Modbus commun cat on. For th s, the des red Slave ID s wr tten to the reg ster w th address 0 (40001), wh ch s the reg ster where the Slave ID s located. L kew se, f the Baud rate s to be changed, the Baud rate can be changed by wr t ng the value for the des red Baud rate accord ng to the table below n the reg ster w th address 1 (40002). M n. Value 0 1 2 3 4 5 6 7 Max. Value 1200 2400 4800 9600 14400 19200 38400 57600 Press and hold the "Cal brat on" button to reset the changes made to the Slave Id or Baud rate to the default values. Wa t unt l the Status (green) LED turns off (approx. 30 seconds). After the LED turns off, the button s released. Thus, Slave ID and Baud rate are returned to the r default values. 8 115200 BEFORE CALIBRATION 1- The product s sold as cal brated. Plase do not cal brate unless necessary. 2- Perform cal brat on only when t s certa n that the product s measur ng ncorrectly. 3- Compare the measurement value of the dev ce w th another dev ce or w th a clean and open a r, control. 4- If the dev ce measures values outs de the range of 350 ppm - 450 ppm n clean and open a r, cal brat on can be performed. CALIBRATION 1- A clean and open area away from any carbon d ox de source should be selected for carbon d ox de cal brat on. 2- The amount of carbon d ox de n clan and open area var es between 350 ppm - 450 ppm. When cal brat on s done, the product takes the value at the t me of cal brat on as 400 ppm. 3- When the "Cal brat on" button n the product s pressed, the Status (green) LED starts bl nk ng, when the LED s fully l t (approx mately 10 second), the cal brat on process starts f the button s released. The Status LED starts bl nk ng rap dly. When the bl nk ng process s over, the cal brat on process s completed. 4 ems kontrol www.emskontrol.com USER MANUAL DECLARATION OF CONFORMITY Headquarters and place of product on, Halkapinar Mah. 1376 Sok. Boran Plaza No:1/L Konak / ZMR - TÜRKYE, EMS KONTROL ELEKTRONK VE MAKNE SAN. TC. A.. declares that the product marked w th CE, whose name and spec ficat ons are g ven below, covers the spec fied d rect ves and prov s ons. Brand: EMS KONTROL Product Name:KT- 3X6 Product Type: Hum d ty and Carbon D ox de Transm tter Compat ble D rect ves: Elektromagnet c Compat b l ty D rect ve 2014/30/EU (EMC EN 61000-6-3: 2007 + A1: 2011, EN 61000-6-1: 2007) Low Voltage D rect ve 2014/35/EU (LVD EN 60730-2-9:2010, EN 60730-1:2011) Add t onal nformat on: Th s product can be used n comb nat on w th other dev ces and compl ance w th the d rect ves covers only the product. EMS KONTROL s not respons ble for the compl ance of ent re system w th the d rect ves. Th s declarat on s not val d f the product s mod fied w thout our approval. RED 5 WARRANTY TERMS 1- The warranty per od of the dev ces and apparatus starts from the nvo ce date and s guaranteed for 2 years aga nst manufactur ng defects. 2- Dev ces and apparatus are del vered to the customer n work ng cond t on n our company. On-s te comm ss on ng s subject to serv ce fee. 3- The repa r of the dev ces and apparatus under warranty s carr ed out n our company as a result of send ng them w th the transportat on company contracted by our company. In on-s te serv ces, transportat on and accommodat on expenses of the serv ce personnel belong to the customer. The cost of the work ng t me spent on the road s added to the serv ce fee and the collect on s made n advance. 4- Ma ntenance of dev ces and apparatus s done n our company. Transportat on and transportat on fees of the dev ces and apparatus to and from our company for ma ntenance belong to the customer. 5- In case of malfunct on of the dev ces and apparatus whose warranty per od cont nues, whether the malfunct on s caused by the fault of the customer or the manufacturer s tested n our company and reported w th the report to be ssued by our company. 6- In case of detect on of manufacturer- nduced faults of the dev ces and apparatus whose warranty per od cont nues, the customer may request a replacement or may request that the repa r costs of the dev ces and apparatus be fully covered by the manufacturer, prov ded that t does not exceed the product pr ce. 7- In the event that the faults of the dev ces and apparatus whose warranty per od cont nues are determ ned to be caused by the customer, all costs belong to the customer. 8- If the customer does not nd cate that he/she s aware of the defects n the dev ces and apparatus from the date the warranty per od starts or n cases where he/she s expected to be aware, he/she cannot benefit from Art cle 6. 9- Fa lures ar s ng from the use of dev ces and apparatus contrary to the po nts n the user manual are not covered by the warranty. 10- Dev ces and apparatus are not covered by the warranty f they are beaten, broken or scratched by the customer. 11- Damages caused by the use of dev ces and apparatus of other brands and models w thout the approval of the manufacturer are not covered by the warranty. 12- Errors caused by rust ng, ox dat on and l qu d contact due to work ng n dusty / ac d c / hum d env ronments are not covered by the warranty. 13- Damages that may occur dur ng transportat on of dev ces and apparatus are not covered by the warranty. If the customer w shes, he/she can have transportat on nsurance. 14- Damages caused by ma ns voltage / faulty electr cal nstallat on are not covered by the warranty. 15- Dev ces and apparatus are not covered by the warranty n case of malfunct ons caused by force majeure such as fire, flood, earthquake, etc. 6 16- All parts of the dev ces and apparatus, nclud ng all parts, are covered by our company's warranty. 17-If the dev ces and apparatus malfunct on w th n the warranty per od, the t me spent n repa r shall be added to the warranty per od. The repa r per od of the goods shall not exceed 20 work ng days. Th s per od starts from the date of not ficat on of the malfunct on of the goods to the serv ce stat on, n the absence of a serv ce stat on, to the seller, dealer, dealer, agent, representat ve, mporter or manufacturer - manufacturer of the goods. It s poss ble for the consumer to not fy the malfunct on by telephone, fax, e-ma l, reg stered letter w th return rece pt or s m lar means. However, n case of d spute, the burden of proof belongs to the consumer. If the malfunct on of the goods s not resolved w th n 20 bus ness days, the manufacturermanufacturer or mporter; unt l the repa r of the goods s completed, another goods w th s m lar character st cs must be allocated to the use of the consumer. 18- Desp te the consumer's r ght to repa r the goods; -Prov ded that t s w th n the warranty per od from the date of del very to the consumer, t fa ls at least four t mes w th n a year or s x t mes w th n the warranty per od determ ned by the manufacturer-manufacturer and / or mporter, as well as the fact that these fa lures make the nab l ty to benefit from the goods cont nuous, -Exceed ng the max mum t me requ red for repa r, -If t s determ ned that t s not poss ble to repa r the malfunct on w th the report to be ssued by the serv ce stat on of the company's serv ce stat on, f the serv ce stat on s not ava lable, respect vely by one of ts dealer, dealer, agency, representat ve, mporter or manufacturermanufacturer, t may request a refund or a pr ce reduct on at the rate of defect. 19-Customer may file compla nts and object ons to consumer courts or consumer arb trat on comm ttees. 20-The warranty cert ficate must be kept by the customer dur ng the warranty per od. In case of loss of the document, a second document w ll not be ssued. In case of loss, repa r and replacement of dev ces and apparatus w ll be made for a fee. Th s dev ce s a Waste Electr cal and Electron c Dev ce accord ng to the d rect ves appl ed n Europe 2002/96/EC. (WEEE) Before scrapp ng or throw ng away th s dev ce, you must prevent ts potent al negat ve consequences for the env ronment and human health. Otherw se t would be nappropr ate waste. Th s symbol on the product s ntended to warn that the product should not be treated as household waste and should be del vered to electr cal and electron c waste collect on po nts. D sposal of the product must be done n accordance w th local env ronmental regulat ons. You can obta n deta led nformat on from author zed un ts on how to destroy, reuse and recycle the product.. 7 Manufacturer's T tle: EMS KONTROL ELEKTRONK VE MAKNE SAN. VE TC. A.. Address: Halkapinar Mah. 1376 Sokak Boran Plaza No:1/L Konak / zm r-TÜRKYE Telephone: 0 (232) 431 2121 E-Ma l: nfo@emskontrol.com Company Stamp: STAMP Product's Type: Hum d ty and Carbon D ox de Transm tter Brand: EMS Kontrol Model: KT-3X6 Warranty Durat on: 2 Years Max mum Repa r T me: 20 Days Banderol and Ser al Number: Vendor Company T tle: . .......................................................... Address: ...................................................... Telephone:..................... Faks:..................... E-Ma l:.......................................................... Invo ce Date and Number:............................ Del very Date and Place:.............................. S gnature of Author sed Person:....................... Company Stamp:.......................................... STAMP Product's Type: Hum d ty and Carbon D ox de Transm tter Brand: EMS KONTROL Model: KT-3X6 EMS Kontrol reserves the r ght to make changes and mprovements to the product spec ficat ons and user manual. *For all changes, please v s t emskontrol.com. ems kontrol www.emskontrol.com 8