Instruction Manual for V I V O models including: Mount-VWRV1 Sturdy Plastic Polymer RV TV Mount, Mount-VWRV1, Sturdy Plastic Polymer RV TV Mount, Plastic Polymer RV TV Mount, Polymer RV TV Mount, RV TV Mount, TV Mount, Mount

User Manual (PDF)

VIVO Anti-Rust Sturdy Plastic Polymer RV TV Mount, VESA 100x100mm Mounting Pattern, Holds up to 30 lbs, Wall Bracket for Camping, Food Truck, Movie Night, Black, Mount-VWRV1 : Electronics

Assembly Manual PDF

RV TV Mount – VIVO - desk solutions, screen mounting, and more


File Info : application/pdf, 4 Pages, 930.41KB

PDF preview unavailable. Download the PDF instead.

91xdolW71JL
RV TV Mount
Instruction Manual

SKU: MOUNT-VWRV1
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/mount-vwrv1
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

help@vivo-us.com

www.vivo-us.com Chat live with an agent!

309-278-5303

WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS

A (x1) Wall Plate

B (x1) VESA Plate

M-C (x4) M5x12mm
Screw

M-D (x4) M6x12mm
Screw

S-A (x6) ST6x30mm Stainless Steel
Screw

M-A (x4) M4 Washer

M-B (x4) M4x12mm Screw

DO NOT EXCEED WEIGHT CAPACITY. 30lbs

Failure to do so may result in serious injury.

(13.6kg)

INSTALLATION LOCATIONS
TV mount can be installed on the inside or outside of an RV or camper wood stud walls. If mounting on an RV, locate the designated mounting location which should be pre-labled by manufacturer as TV BACKER or TV MOUNTING LOCATIONS. Refer to RV maufacturer for more information.

DESIGNATED MOUNTING LOCATION

IMPORTANT NOTE: TV should be ALWAYS be removed from wall and securely stowed
away while RV/camper is in motion.
2

ASSEMBLY STEPS
STEP 1
A

Hold Wall Plate (A) up to the desired mounting location and mark hole locations using a pencil. Use of a level is highly recommended. If mounting in an RV make sure the trailer is level before leveling the mount.
Drill marked holes 1.2" (30mm) deep using a " (3mm) drill bit. Install Wall Plate (A) using ST6x30mm Screws (S-A) and a Phillips screwdriver.

S-A

30mm(1.2)

3mm (0.12)

STEP 2
Secure VESA Plate (B) to TV using appropriate Screws (M-B thru M-D), M4 Washers (M-A), and a Phillips screwdriver. Ensure "UP" callout is in the correct orientation.

B M-B
M-A

- OR -

B
M-C M-D

STEP 3
Because of low-profile of mount, any needed cables should be plugged in prior to mounting the TV. Once cables are plugged in, slide TV with VESA Plate (B) onto Wall Plate (A).

B A

3

Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us

LAST UPDATED: 11/22/2022 REV1

Open Monday - Friday 7:00am - 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

309-278-5303

AVG. RESOLUTION TIME (within office hrs): 5M 4S

www.vivo-us.com
Chat live with an agent!

AVG. RESOLUTION TIME (within office hrs): < 15 M

help@vivo-us.com

AVG. RESPONSE TIME (within office hrs): 1HR 8M - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com



References

Adobe PDF Library 17.0 Adobe InDesign 18.0 (Windows)