SuperBox S6 Ultra User Guide
Preface
Thank you for choosing our Smart Media Player. For your convenience and ease of use, we created this manual. Please read it as a reference on how to properly use the TV box.
Disclaimer
We make sure to provide the most current information about the product. We do not guarantee the contents are fail-proof. We disclaim any implied guarantees concerning market value or suitability for specific purposes. The information written here are instructions for users to use the product correctly and maintain it. We reserve all rights to amend, change or translate the user manual without prior notice, thus, we recommend that you regularly visit our website to obtain the latest information.
Settings
Move to the [Settings] icon, press the [OK] button to enter system settings. You will see the menu on the right.
Wi-Fi: With Wi-Fi enabled, you'll need to select your network's name and enter the password. An on-screen keyboard should appear if you're using the standard infrared remote control.
Ethernet: If you will use a network cable instead of Wi-Fi, please select this option [DHCP] instead.
IP settings:
Troubleshooting
Warning: Under any circumstances, never try to repair the device by yourself, it will void the warranty. If any issue occurs, read the following instructions on how to troubleshoot the device. If you are unable to resolve the issue, please consult your dealer for help.
| Problem | Solution |
|---|---|
| No signal on the TV | 1) Check if the HDMI or AV cable is securely connected. 2) Check if you have selected the correct input source on your TV. |
| Cannot turn on your Smart TV Box | 1) Check if the power connector is completely plugged into the DC socket of your Smart TV Box. 2) Check if the power supply is stable. |
| Cannot connect to network | 1) Make sure that the network cable is securely connected and the Ethernet works well. 2) Make sure that WiFi network is connected and the security key for the encrypted network is correct. 3) Make sure that you select the correct IP address settings. |
| Remote Control does not respond | 1) Make sure that the batteries are good. 2) Make sure that the distance between the remote control and your Smart TV Box is no longer than 8 meters. |
| Some TV can not display entire screen | Setup the screen display position of your Smart TV Box. Settings->display->Display position |
Specification
- Android 12
- Processor: Quad-core ARM Cortex™-A53
- GPU: Quad-core Mali-T720 MP2 @ 600Mhz
- Memory: 4GB DDR3
- Internal Storage: 128 GB EMMC
- Support Video Decoder: H.265 10bit up to HP level 5.1: 6K4K2K@30fps (Up to 250 Mbps)
- Support audio formats: MP3, WMA, AAC, FLAC etc.
- Support photo formats: JPG, JPEG, BMP, GIF, PNG.
- USB2.0x1, USB3.0x1 Host connectors and SD/MMC card reader.
- Network: Rj45 1000M Ethernet; Support 802.11 b/g/n/ac/ax 2.4G/5G WiFi6
- Composite Audio/Video output, support all television.
- Support all standard SD/HD/UHD video output formats: 480i/p, 576i/p, 720p, 1080i/p, 6K.
- HDMI Support 6K@60fps Support HD Audio(7.1CH)
Package Contents
| NO. | Picture | Name | Piece |
|---|---|---|---|
| 1 | [Smart Media Player] | Smart Media Player | 1 |
| 2 | [IR remote control] | IR remote control | 1 |
| 3 | [Power Adaptor] | Power Adaptor | 1 |
| 4 | [HDMI Cable] | HDMI Cable | 1 |
| 5 | [User Guide] | User Guide | 1 |
Note: Other contents are optional.
Connection Diagram
A visual representation showing the SuperBox connected to a television via HDMI and power.
HDMI connection
- Connect the HDMI cable into the product interface, and the other side into a TV set.
- Set the TV Output Display Settings to 720p or 1080p and then switch to the corresponding TV HDMI Component Video status.
A/V connection
If your TV has no HDMI connector, you can connect your TV via AV cable. Connect the AV cable into the product interface, and the other side into a TV set.
FCC Warnning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
