Doozoler Shower System

Model: HST16401

Water Pressure: 0.3-1.0MPa

Enjoy nature SPA. Beautiful Life, Happy Bath.

Installation Considerations

1. Please read these instructions thoroughly before beginning installation. Ensure you have all necessary tools and supplies.
2. For best results, installation by a licensed, professional plumber is recommended.
3. Ensure inlet pipes and supply valves are installed and cleaned, with no impurities in the pipeline.
4. After installation, check all joints for leakages.

Tools Required

• Safety helmet ⛑️
• Pincer pliers ?
• Screwdriver ?
• Spanner ?
• Saw ?

Shower Parts Identification Diagram

Install Shower Head

STEP 1: Layout shower head power / water pipe

Diagram showing the placement of the shower head's power and water pipes.

STEP 2: Measure shower head holes on ceiling

Shower hole inside size: 385mm x 385mm.

Diagram illustrating the measurement of the shower head opening in the ceiling, indicating the required internal dimensions.

STEP 3: Install fix frame

There are two methods to install the fix frame:

• Method A: Use screws to fix directly.
• Method B: Use expansion bolts (150-500mm) to fix.

Diagrams showing two methods for installing the shower head's fixed frame: one using screws, the other using expansion bolts.

STEP 4: Layout water pipe

Diagram showing the routing of the water pipe for the shower head installation.

STEP 5: Install shower head

Diagram illustrating the process of attaching the shower head to the ceiling, including securing it with screws and connecting hoses.

STEP 6: Connect water inlet pipe

Diagram showing the connection of the water inlet pipe to the shower system.

STEP 7: Connect LED & audio power line

Diagram illustrating the connection of the power lines for the LED lighting and audio system to the transformer and receiver.

STEP 8: Testing the water

Diagram showing water flowing from the shower head as part of the testing process.

STEP 9: Shower installation

Diagram showing the final assembly of the shower head, including attaching decorative panels and securing with screws.

Install Body Jet

Connection Standards:

• USA: 1/2" - 14 NPT
• Canada: 1/2" - 14 NPT
• Europe: G1/2"

The product is equipped with G1/2 specifications connectors or interfaces. It is recommended that users use G1/2 specifications connectors or interfaces. The G1/2 connector or interface is compatible with the NPT1/2 connector or interface. If you use the NPT1/2 connector or interface, please wrap enough sealing tape on the connector or interface. Cut off excess parts with a saw. Put on the decoration cover, then screw the body jet in.

Diagrams showing the installation of body jets, including pipe connections and the use of sealing tape for NPT fittings.

Install Handheld Shower

Diagram illustrating the installation of the handheld shower, including screwing the thread into the wall pipe, attaching the holder, and connecting the hose.

Bluetooth Music Playing

Bluetooth Name: Music Shower System

1. Turn on the shower. The speaker will automatically enter pairing mode. The speaker will attempt to connect to the last paired device. If the device is nearby, a connection is automatically established, indicated by two beeps.
2. On your Bluetooth device, run the pairing program to detect the speaker. Select "Music Shower System" from the list of detected devices.
3. If a password is required, enter "0000". This may also be referred to as a "code", "PIN", or "PIN number".
4. Once the Bluetooth connection is successfully established, you will hear two beeps.
5. If the connection fails, repeat the process from Step 1.

Remote Control

The remote control allows you to manage the shower's features:

• (1) Turn ON/OFF [Power Button]
• (2) Color Touch Ring [Color Selection]
• (3) & (6) Color Temperature Adjusting [Temperature Control]
• (4) & (8) Dynamic Speed Adjusting [Speed Control]
• (7) & (9) Dynamic Brightness Adjusting [Brightness Control]
• (5) Mode Switch [Mode Selection]

Diagram of the remote control with numbered buttons corresponding to their functions.

Care and Maintenance

1. Modern shower products use a combination of materials for design and functionality.
2. Exercise caution during cleaning to avoid damage. Damage from improper treatment is not covered by the warranty.
3. Use only specialized products for removing lime scale, following the manufacturer's instructions.
4. Avoid cleaners containing hydrochloric, formic, acetic, or phosphoric acids, as they can damage finishes and plastic components.
5. Never use abrasive cleaners, cloths, pads, or sponges.
6. Clean your shower products regularly to prevent scale buildup and water spotting.
7. When using spray cleaners, spray onto a sponge or cloth first, not directly onto the product.
8. After cleaning, rinse thoroughly with clear water to remove any cleaner residue.
9. Rinse well with clean water after use to remove soap and shampoo residue, which can also cause damage.
10. Harsh cleaning materials will cause further damage if the surface is already compromised.