LTECH Mini LED Controller M3/M6/M7

Product Overview

The LTECH Mini series LED controllers, including models M3, M6, and M7, offer powerful independent R&D capabilities in LED field technology. These controllers are compact, with a volume that is only 1/3 of conventional controllers, yet they implement advanced features such as dimming, RGB, and color temperature control. Their high cost performance and creative design provide users with enhanced benefits and convenience.

Key Features

• RF Wireless Technology: Fashionable, slim, light, and easy-to-carry RF remote with a small, exquisite, and easy-to-install receiver.
• Performance: Low power consumption, long-distance operation, strong obstruction penetration ability, and independent ID for interference-free performance.
• High Grayscale: 4096 levels of grayscale (compared to the market standard of 256) for outstanding grayscale performance, resulting in gentler light and richer, more colorful dynamic changing modes.
• Versatile Control: One receiver is compatible with six different remote functions, allowing users to experience dimming, color temperature, and RGB control from a single receiver.
• Intuitive Operation: Simple and intuitive RF remote design; what you see is what you get.
• Automatic Sleep Mode: The touch remote automatically enters standby mode after 30 seconds of unattended operation to extend battery life.

Product Dimensions

Receiver Dimensions: Length 135mm × Width 30mm × Height 20mm

RF Remote Dimensions: Length 104mm × Width 58mm × Height 9mm

A remote holder is also included.

Specifications

Receiver (Model: M3-3A)

Remote (Models: M3/M6/M7)

Remote Learning ID Method

The remote control is pre-matched to the receiver before leaving the factory. If the pairing is accidentally deleted, follow these steps to re-learn the ID:

1. Learning ID: Short press the ID learning button on the receiver (M3-3A). The indicator light will turn on. Then, press any key on the remote control. The indicator light will flash several times, confirming activation.
2. Cancel ID: Long press the ID learning button on the receiver for 5 seconds to cancel all paired remotes.

Note: One receiver can be matched with a maximum of 10 same or different kinds of remotes.

Receiver Operating Instructions

The receiver features the following connection points:

• Power Input Socket: Connect the 12-24V DC power supply here. [power-symbol]
• Remote ID Learning Button: Used for pairing remotes.
• Indicator Light: Shows status during operation and pairing.
• LED Lamp Connection Socket: Connect your LED strips here. Terminals are typically labeled V+, R, G, B, W, C depending on the control mode.

Different remote models control specific functions:

• Remote M1: For Dimming control.
• Remote M2/M5: For Color Temperature control.
• Remote M3/M6/M7: For RGB control.

Remote Control Operating Instructions

M3 Remote

The M3 remote features a touch color circle for selecting colors, speed/brightness adjustment buttons, a mode key for cycling through modes, and an ON/OFF button.

M3 Sleep Mode: When the touch remote is left unattended for over 30 seconds, it automatically enters standby mode to conserve battery life. Press any of the four main function keys (Speed/Brightness+/-, Mode, ON/OFF) to wake it up.

M3 Mode Table:

• 1. Static Red
• 2. Static Green
• 3. Static Blue
• 4. Static Yellow
• 5. Static Purple
• 6. Static Cyan
• 7. Static White
• 8. RGB Skipping
• 9. 7 Colors Skipping
• 10. RGB Color Smooth
• 11. Full-color Smooth

The M3 remote also includes mode shortcut keys and color shortcut keys for quick access to functions.

M6 Remote

The M6 remote provides dedicated buttons for Speed+/-, Brightness+/-, Mode Shortcut Key, Color Shortcut Key, Loop Play, and ON/OFF.

M7 Remote

The M7 remote offers Color Shortcut Keys, Mode Shortcut Keys, RGB Brightness +/-, a Color-save Key (press and hold for 2 seconds to save), and ON/OFF buttons. It also includes Speed+/-, Loop Play, and AUTO functions.

Wiring Diagram

The wiring diagram illustrates the connection of the LTECH Mini LED controller system. It shows a power adapter connecting to the receiver (Model M3-3A). The receiver then connects to the RGB LED strip. The diagram indicates power input terminals (DC+, DC-) and LED output terminals (V+, Color, W, R, G, B) on the receiver for connecting the LED strip.

Important Attention Points

1. Installation and servicing should only be performed by qualified personnel.
2. This product is not waterproof. Protect it from sun and rain. For outdoor installations, use a waterproof enclosure.
3. Ensure good heat dissipation and ventilation to prolong the working life of the controller.
4. Verify that the output voltage of any LED power supply used matches the product's working voltage.
5. Use adequately sized cables for connections between the controller and LED lights to handle the current, and ensure cables are securely fastened in connectors.
6. Double-check all wire connections and polarities before applying power to prevent damage to the LED lights.
7. If a fault occurs, return the product to your supplier. Do not attempt self-repair.

Warranty Information

LTECH provides lifelong technical assistance for this product.

Warranty Coverage: A 5-year warranty is provided from the date of purchase, covering manufacturing faults for free repair or replacement.

Post-Warranty Service: For faults beyond the 5-year warranty period, LTECH reserves the right to charge for time and parts.

Warranty Exclusions: The warranty does not cover:

• Man-made damages from improper operation or connection to excess voltage/overloading.
• Excessive physical damage to the product.
• Damage caused by natural disasters or force majeure.
• Damage to the warranty label, fragile label, or unique barcode label.
• Products that have been replaced with a new unit.

Limitation of Liability: Repair or replacement under this warranty is the exclusive remedy. LTECH is not liable for incidental or consequential damages.

Warranty Amendments: Any changes to this warranty require written approval from LTECH.

Note: This manual applies only to the specified model. LTECH reserves the right to make changes without prior notice.