Declaration of Conformity

Declared Products

Victron Energy B.V. declares that the following products are in conformity:

PRODUCT TYPE: Auxiliary components

BRAND: Victron Energy

Product Description	Specification
Temperature sensor for BMV-702/712	M8 circular connector cables
RJ45-splitter 1xRJ45 male/15cm cable/2xRJ45 female	VE.Can to CAN-bus BMS type A Cable 1.8 m
Interface MK3-USB (VE.Bus to USB)	VE.Can to CAN-bus BMS type A Cable 5 m
VE.Direct LoRaWAN EU863-870 module	VE.Can to CAN-bus BMS type B Cable 1.8 m
VE.Direct LoRaWAN US902-928 module	VE.Can to CAN-bus BMS type B Cable 5 m
VE.Direct LoRaWAN AU915-928 module	USB extension cable 0,3m one side right angle
VE.Direct TX digital output cable	VE.Bus to BMS 12-200 alternator control cable
Interface 1140	CAN-bus Temp. sensor
Phoenix Inverter Control VE.Direct	VE.Can Power Cable

Conformity to European Union Directives

These products are in conformity with the requirements of the following Directives of the European Union:

EMC Directive 2014/30/EU with the following harmonized standards:

EN 55014-1:2017/A11:2020
EN 55014-2:1997/A1:2001/A2:2008
ISO 7637-2:2016

Low Voltage Directive 2014/35/EU with the following harmonized standards:

EN-IEC 60335-1:2012/AC:2014/A11:2014/A13:2017/A1:2019/A14:2019/A2:2019
EN-IEC 62109-1:2010

Restriction of the use of certain hazardous substances RoHS (2011/65/EU and 2015/863/EU) with the following harmonized standards:

EN-IEC 63000:2018

Certification Details

CE MARK DATE: January 15th, 2020

Signed: Reinout Vader

Authority: Managing Director

Date: 29 December 2021

	Victron Energy VE.Bus BMS NG Product Manual This manual provides comprehensive information on the Victron Energy VE.Bus BMS NG, a Battery Management System designed for Victron Energy Lithium NG batteries. It covers installation, configuration, monitoring, and troubleshooting for optimal battery performance and protection.
	Victron Energy Venus GX Manual: Installation, Configuration, and Operation Guide Comprehensive user manual for the Victron Energy Venus GX system monitor and controller. Covers installation, setup, connecting Victron and non-Victron products, internet connectivity, configuration, and troubleshooting.
	VictronConnect Configuration Guide for VE.Bus Products A comprehensive guide to configuring, monitoring, and updating Victron VE.Bus products using the VictronConnect application. Covers settings, firmware updates, and troubleshooting for Victron Energy inverter/chargers.
	Victron Energy Datenkommunikation: Protokolle, Integration & Systemaufbau Erfahren Sie mehr über die Datenkommunikationsprotokolle von Victron Energy, einschließlich Modbus-TCP, NMEA 2000, VE.Direct und VE.Bus. Dieses Dokument bietet technische Details und Anleitungen zur Integration von Victron-Produkten in Ihre Systeme.
	Victron Energy Ekrano GX Manual: Installation, Configuration, and Operation Guide Comprehensive manual for the Victron Energy Ekrano GX, detailing installation, connectivity, configuration, troubleshooting, and integration with other Victron and third-party devices for energy monitoring and control.
	Victron Energy Cerbo-S GX Manual: Installation, Configuration, and Operation Guide Explore the Victron Energy Cerbo-S GX Manual for detailed guidance on installing, configuring, and managing your energy system. Learn about connectivity, remote monitoring via VRM, and troubleshooting.
	Victron Energy VE.Bus BMS and smallBMS Declaration of Conformity Official Declaration of Conformity from Victron Energy B.V. for their VE.Bus BMS and smallBMS product lines, confirming compliance with EU directives and relevant harmonized standards.
	Victron Energy Cerbo GX Manual: Advanced System Monitoring and Control Comprehensive user manual for the Victron Energy Cerbo GX, detailing installation, configuration, connectivity with Victron and third-party devices, firmware updates, and system monitoring via the VRM Portal.