Important Information Before Installation
Please read the entire instruction manual thoroughly before commencing installation. This system is designed for point-of-use installation and requires specific feed water conditions for optimal performance. Ensure all components are checked for secure fittings before installation.
Key Features and Components
- 4-Stage Reverse Osmosis filtration
- Undersink design for convenience
- Includes necessary fittings and tubing for installation
- Leak shut-off valve for added safety
- Storage tank for a steady supply of purified water
Installation Overview
The installation process involves connecting the system to the cold water supply, setting up the drain line, mounting the faucet, and assembling the filter housings and membrane. Detailed step-by-step instructions are provided for each stage, including feed water connection, drain clamp connection, faucet drilling, and storage tank assembly.
Operation and Maintenance
This guide details the system start-up and operation, including plumber and client commissioning steps. It also outlines the recommended maintenance schedule for filter replacements (pre-filters, post-filter, RO membrane) and provides guidance on service inspections and troubleshooting common issues.
Troubleshooting and Warranty
A comprehensive troubleshooting section addresses common problems such as leaks, low water production, and taste issues, offering potential causes and solutions. The document also covers the manufacturer's warranty, including general warranty terms, qualification, and exclusions.
For further assistance or to purchase replacement parts, please visit FSA Filter Systems Australia.
