adamsonsystems.com/support/downloads-directory/design-and-control/e-rack/205-adamson-plm-lake-handbook/file
User Manual for ADAMSON models including: IS219, Subwoofer, IS219 Subwoofer
amo Sem geeg IS119 e aa Page 4 IS219 • The IS219 is a compact subwoofer enclosure designed for extended LF capabilities. It contains two SD19 19” LF drivers. • The operational frequency range of the IS219 is 29 Hz to 100 Hz.
amo Sem geeg IS119 e aa Page 4 IS219 • The IS219 is a compact subwoofer enclosure designed for extended LF capabilities. It contains two SD19 19" LF drivers. • The operational frequency range of the IS219 is 29 Hz to 100 Hz.
File Info : application/pdf, 9 Pages, 3.93MB
DocumentDocumentTable of Contents ______________________________________________________________________________________ 3 ______________________________________________________________________________________ 4 ______________________________________________________________________________________ 5 ______________________________________________________________________________________ 6 ______________________________________________________________________________________ 7 ______________________________________________________________________________________ 8 ______________________________________________________________________________________ 9 Safety & Warnings Read these instructions, keep them available for reference. This manual can be downloaded from Heed all warnings and follow all instructions. A qualified technician must be present during the installation and use of this product. This product is capable of producing extremely high sound pressure levels and should be used according to the specified local sound level regulations and good judgement. Adamson Systems Engineering will not be liable for damages caused by any possible misuse of this product. Servicing is required when the loudspeaker has been damaged in any way, such as when the loudspeaker has been dropped; or when for undetermined reasons the loudspeaker does not operate normally. Inspect your products regularly for any visual or functionality irregularities. Protect the cabling from being walked on or pinched. Read the appropriate IS-Series Rigging Manual before installing the product. Pay attention to rigging instructions included in both Blueprint AVTM and the IS-Series Rigging Manual. Use only with the rigging frames/accessories specified by Adamson, or sold with the loudspeaker system. This speaker enclosure is capable of creating a strong magnetic field. Please use caution around the enclosure with data storage devices such as hard drives. In an effort to continuously improve its products, Adamson releases updated accompanying software, presets and standards for its products. Adamson reserves the right to change the specifications of its products and the content of its documents with no prior notice. Adamson Systems Engineering | IS119 User Manual Page 1 IS219 User Manual Distribution Date: May 1st, 2021 Copyright 2021 by Adamson Systems Engineering Inc.; all rights reserved This manual must be accessible to the person operating this product. As such, the product owner must store it in a safe place and make it available upon request to any operator. Resale of this product must include a copy of this manual. This manual can be downloaded from https://www.adamsonsystems.com/en/support/downloads-directory/is-series/is219 Declarations EU Declaration of Conformity Adamson Systems Engineering declares that the products stated below are in conformance with the relevant fundamental health and safety criteria of the applicable EC Directive(s), in particular: Directive 2014/35/EU: Low Voltage Directive IS219 - 994-0007, 994-0008, 994-0010, 994-0007, 994-0008, 994-0010 Signed at Port Perry, ON. CA - May 1st, 2021 -----------------------------------------------Brock Adamson (President & CEO) ADAMSON SYSTEMS ENGINEERING, Inc. 1401 Scugog Line 6, Port Perry (ON), L9L 1B2, Ontario, Canada T: +1 905 982 0520, F: +1 905 982 0609 Email: info@adamsonsystems.com Website: www.adamsonsystems.com Table of Contents 1. Safety & Warnings ______________________________________________________________________________________ 3 2. Product Introduction ______________________________________________________________________________________ 4 3. Wiring ______________________________________________________________________________________ 5 4. Amplification ______________________________________________________________________________________ 6 5. Presets ______________________________________________________________________________________ 7 6. Weatherized ______________________________________________________________________________________ 8 7. Technical Specifications ______________________________________________________________________________________ 9 Safety & Warnings Read these instructions, keep them available for reference. This manual can be downloaded from https://www.adamsonsystems.com/en/support/downloads-directory/is-series/is219 Heed all warnings and follow all instructions. A qualified technician must be present during the installation and use of this product. This product is capable of producing extremely high sound pressure levels and should be used according to the specified local sound level regulations and good judgement. Adamson Systems Engineering will not be liable for damages caused by any possible misuse of this product. Servicing is required when the loudspeaker has been damaged in any way, such as when the loudspeaker has been dropped; or when for undetermined reasons the loudspeaker does not operate normally. Inspect your products regularly for any visual or functionality irregularities. Protect the cabling from being walked on or pinched. Read the appropriate IS-Series Rigging Manual before installing the product. Pay attention to rigging instructions included in both Blueprint AVTM and the IS-Series Rigging Manual. Use only with the rigging frames/accessories specified by Adamson, or sold with the loudspeaker system. This speaker enclosure is capable of creating a strong magnetic field. Please use caution around the enclosure with data storage devices such as hard drives. In an effort to continuously improve its products, Adamson releases updated accompanying software, presets and standards for its products. Adamson reserves the right to change the specifications of its products and the content of its documents with no prior notice. Adamson Systems Engineering | IS119 User Manual Page 3 IS219 IS219 Low Profile Subwoofer · The IS219 is a compact subwoofer enclosure designed for extended LF capabilities. It contains two SD19 19" LF drivers. · The operational frequency range of the IS219 is 29 Hz to 100 Hz. The use of proprietary techologies such as Advanced Cone Architecture give the IS219 an extremely high maximum SPL level. · With a height of 508mm / 20 in the IS219 fits under low stages. The enclosure has an unobtrusive visual design which blends seamlessly into the surrounding space, including identical grills at the front and back so cardioiod deployments appear identical to non-cardioid. It is made of marine grade birch plywood. Without sacrificing lowered resonance to composite material, the IS119 is able to maintain a low weight of 44.5 kg / 98 lbs. · The IS219 is intended to be paired with the IS-Series line of cabinets with a crossover frequency of approximately 80 Hz. · The IS219 is designed for use with Lab.gruppen's D-Series line of installation amplifiers. The nominal impedance of the IS219 is 4 . Adamson Systems Engineering | IS119 User Manual Page 4 IS219 Wiring The IS219 (994-0007, 994-5007) comes with 4x Neutrik SpeakonTM NL4 connections, wired in parallel. The 2 rear connections pass pin 1 +/- to the driver and the 2 front connections pass pin 2 +/- to the driver. IS219 Rear IS219 Front The IS219b (994-0008, 994-5008) comes with an external barrier strip mounted to the rear grill. Terminals 1, +/- are passed to the driver, terminal 2, +/- are not connected. IS119b Rear To operate the IS219b in FB or FBF cardioid mode, swap the front and rear grills by: 1. Removing the six screws holding each grill to the side rigging pieces 2. Unclipping the grill with the barrier strip from the rear PCB, and swapping the grills 3. Re-clipping the grill with the barrier strip to the front PCB and affix with the same screws Adamson Systems Engineering | IS119 User Manual Page 5 IS219 Amplification The IS-Series cabinets are paired with Lab.gruppen D-Series amplifiers. The maximum quantity of the IS219 per D200:4L model is 3. For a master list, please refer to the Adamson Amplification Chart, found on our website. https://adamsonsystems.com/support/downloads-directory/design-and-control/e-rack/283-amplificationchart-9/file 3 x IS219 D200:4L Adamson Systems Engineering | IS119 User Manual Page 6 IS219 Presets The Adamson LoadLibrary (https://www.adamsonsystems.com/support/downloads-directory/design-and-control/erack/245-adamson-load-library-5-0-1/file) contains a preset designed for IS219 deployments. For a master list, please refer to the Adamson PLM & Lake Handbook, found on our website. https://adamsonsystems. com/support/downloads-directory/design-and-control/e-rack/205-adamson-plm-lake-handbook/file IS219 subs should be phase-aligned to the additionally deployed array using measurement software. Subwoofer Configuration Applicable Preset IS219 Xo80 Low passed at 80Hz Linear Phase Latency included to match IS-Series Line Array Cabinets Omni-directional Adamson Systems Engineering | IS119 User Manual Page 7 IS219 Weatherized IS-Series weatherized models add an additional layer of environmental and corrosion protection to Adamson's already durable cabinet design. Weatherized enclosures are ideal for marine and coastal venues, outdoor stadiums, open-air performance spaces, and other permanent outdoor installations. IS-Series weatherized cabinets feature the following additional protective features. Corrosion resistance Corrosion resistance extends the lifetime performance of your system in outdoor venues where water, salt and acidity can impact durability and function. All structural steel elements of Adamson weatherized cabinets including rigging and rigging links are made of a high yield strength stainless steel alloy that offers 100% corrosion resistance. Cabinet hardware is made of non-plated stainless steel, designed to provide exceptional rust and corrosion resistance, particularly in high-saline environments. Environmental sealing Additional protection of the cabinet helps ensure that loudspeaker performance isn't impeded by the harsh environments in which your system is deployed. To guard against water and particle intrusion, the same two-part polyurea coating that gives Adamson cabinets their life-extending exterior protection is applied to the interior of the enclosure, creating a complete seal. Weatherized models feature an exterior coating with a distinctive smooth finish that allows for easy cleaning and removal of contaminants like dirt, grime, salt water or sand. To protect against dust and other particles, a fine stainless steel mesh has been added to all points of entry including behind the front grille screens. Cabling for the IS-Series weatherized cabinets is pre-wired and protected inside a gasket-sealed jackplate, with gland nuts in place to seal the connection points. Adamson Systems Engineering | IS119 User Manual Page 8 IS219 Technical Specifications 180° 90° 0° 90° 180° 30 Hz IS219 EF 180° 90° 0° 90° 100 Hz 180° 30 Hz IS219 EF 80° 90° 0° 90° 100 Hz 80° 30 Hz 100 Hz IS219 FBF Frequency Range (+/- 3dB) Maximum Peak SPL** 29 Hz - 100 Hz 143 dB Components LF 2xSD19 19" Neodymium Driver Nominal Impedance LF 4 Power Handling (AES / Peak) LF 3200 / 12800 W Rigging Integrated Rigging System Connection 4x SpeakonTM NL4 (2x Front 2+/2-, 2x Rear (1+/1-), or Barrier Strips Height Front (mm / in) 508 / 20 Width (mm / in) 1168 / 46 Depth (mm / in) 875 / 34.45 Weight (kg / lbs) 90 / 199 Colour Black & White (Standard), RAL Colours (On Demand) Processing Lake **12 dB crest factor pink noise at 1m, half space, using specified processing and amplification 875 mm / 34.45 in 508 mm / 20 in 1168 mm / 46 in Adamson Systems Engineering | IS119 User Manual Page 9