Simonrack Superplus Metal Shelving Unit Safety Instructions

General Safety Precautions

• Never exceed the specified maximum load per shelf and for the entire unit.
• Ensure the load is evenly distributed across the entire surface of the shelf to avoid point loads.
• Follow assembly instructions precisely and ensure all screws and fasteners are tightly secured.
• Heavy-duty shelving must be firmly anchored to the wall to prevent tipping over.
• Conduct regular inspections to ensure there is no structural damage or loosening.
• Use appropriate lifting equipment and techniques to place and remove heavy loads to avoid injury and damage.
• Do not climb on the shelves or use them as ladders.
• Use only on flat surfaces.
• Ensure the area around the shelves is free of obstructions to guarantee safe working.
• Distribute weight evenly across the shelves. Avoid placing heavy items on one side of the shelf as this may cause imbalance and potentially tip over.

Child Safety

• To prevent accidents, keep children away from the shelf and do not allow them to use it as play equipment.
• Products should never be used by children or persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless explicitly permitted by the manufacturer's instructions.
• Children should never play with products unsupervised.
• Cleaning and user maintenance must not be carried out by children.
• Danger of suffocation! Packaging material is not a toy. Keep packaging material out of the reach of children and persons with reduced physical, sensory, or mental capabilities.

Assembly and Maintenance

• When assembling the shelf, wear appropriate protective equipment, such as gloves and safety shoes, to avoid injury.
• Place the shelf firmly and stably, ensuring it cannot tip over.
• Check the shelf regularly for damage and repair or replace if necessary.

Manufacturer Information

Manufacturer: Simonrack

Address: C/ Polígono, C, 50461, Alfamén, (Zaragoza) ESPAÑA

Contact: info@simonrack.com