ASSEMBLY INSTRUCTION
Models: N723P272266, N723P272267, N723P272268
For any questions, please contact: Email: hdteam@aminalife.com
⚠️ Sets often ship in multiple boxes and delivery date may vary.
CUSTOMER SERVICE
Questions, Missing parts, Assembly help? No need to return the product, we will gladly help and ship your replacement parts free of charge.
PRE-ASSEMBLY INFORMATION
NOTICE
- Please assemble it AFTER all boxes are received.
- Please do not throw away any of the packages or the instruction until the sofa is fully assembled.
- Please keep children away from the plastic bags or any small pieces of stuff.
- Some key parts of our product may be stored and hidden inside of other parts. Please open any zippered or hook & loop storage compartments to take out all parts.
- Please do not open the compressed packages until your sofa frame is completely assembled.
- As the cushions are all vacuum compressed, there will be some wrinkles. Please give them up to 72 hours to reach its original size and the wrinkles will basically disappear.
- DO NOT INSTALL THE SCREWS ALL THE WAY IN THE BEGINNING. Place each screw into their proper hole and use your hand to twist the screw halfway. Twist all the screws in halfway to ensure the holes will match up properly and the product is level on the ground. When everything seems fitted, then tighten the screws.
- Do not over tighten screws and bolts to avoid stripping.
? 2 adults recommended
⏰ Takes about 1.5 Hours to assemble
⚖️ Weight capacity of each seat: 330LBS
COMPONENTS
Hardware List
| NO | DESCRIPTION | SKETCH | QTY |
|---|---|---|---|
| N | Washer | [Washer symbol] | 44 |
| M | Screws 8X60 | [Screw symbol] | 20 |
| O | Screws 8X80 | [Screw symbol] | 12 |
| P | Butterfly Nut | [Butterfly nut symbol] | 12 |
| Q | Gasket | [Gasket symbol] | 16 |
| R | Wrench | [Wrench symbol] | 3 |
Parts for N723P272266
- A: Seat frame (2PCS)
- B: Seat cushion (2PCS)
- H: Back frame (2PCS)
- E: Back cushion (Left) (1PC)
- G: Back cushion (Right) (1PC)
- L: Leg (8PCS)
- M: Screws 8X60mm (8PCS)
- N: Washer (24PCS)
- O: Screws 8X80mm (8PCS)
- P: Butterfly nut (8PCS)
- Q: Gasket (8PCS)
- R: Wrench (1PC)
Parts for N723P272267
- A: Seat frame (1PC)
- B: Seat cushion (1PC)
- H: Back frame (1PC)
- F: Back cushion (1PC)
- J: Ottoman frame (1PC)
- K: Ottoman cushion (1PC)
- L: Leg (8PCS)
- M: Screws 8X60mm (4PCS)
- N: Washer (12PCS)
- O: Screws 8X80mm (4PCS)
- P: Butterfly nut (4PCS)
- Q: Gasket (8PCS)
- R: Wrench (1PC)
Parts for N723P272268
- C: Left armrest (1PC)
- D: Right armrest (1PC)
- I: Plug (1PC)
- N: Washer (8PCS)
- M: Screws 8X60mm (8PCS)
- R: Wrench (1PC)
ASSEMBLY STEPS
STEP 1: Install Armrests
Install the left armrest (C) and right armrest (D) onto the seat frame (A).
Hardware required: N (8PCS), M (8PCS)
[Diagram showing armrests C and D being attached to seat frame A]
STEP 2: Connect Seat Frames
Connect the seat frames (A) together.
Hardware required: N (16PCS), O (8PCS), P (8PCS)
[Diagram showing multiple seat frames A being connected]
STEP 3: Install Legs
Install the sofa legs (L) onto the seat frames (A) and ottoman frame (J).
Note: Legs may be unnecessary for certain configurations.
Hardware required: Q (16PCS)
[Diagram showing legs L being attached to seat frames A and ottoman frame J]
STEP 4: Attach Back Frames
Fix the back frames (H) onto the seat frames (A).
Instruction: Open the backrest cover and install the screws.
Hardware required: N (12PCS), M (12PCS)
[Diagram showing back frames H being attached to seat frames A]
STEP 5: Restore Cushions
Open the vacuum bag and take out the cushions (B/E/F/G/K).
To restore the original shape, follow these steps:
- Open the vacuum bag carefully.
- Press and tap with both hands from the side to inhale air.
- Press and tap with both hands from the front to inflate.
- Carefully smooth out each section until the surface is even.
After assembly, place cushions in a dry, ventilated area. They should restore to their best condition after about 72-96 hours.
STEP 6: Place Cushions
Place the cushions (B, E, F, G, J, K) onto the assembled sofa and ottoman.
[Diagram showing cushions being placed on the sofa and ottoman]
STEP 7: Complete
Assembly is now complete. Your sofa is ready for use.
[Diagram showing the fully assembled sofa and ottoman]
