ASUS Global
User Guide for ASUS models including: VG28UQL1A Series, VG28UQL1A Series LCD Monitor, LCD Monitor
2023-11-29 — Federal Communications Commission Statement. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:.
File Info : application/pdf, 29 Pages, 3.29MB
DocumentDocumentVG28UQL1A Series LCD Monitor
User Guide
Table of contents
Notices......................................................................................................... iii Safety information ...................................................................................... iv Care & Cleaning .......................................................................................... vi 1.1 Welcome! ...................................................................................... 1-1 1.2 Package contents......................................................................... 1-1 1.3 Assembling the monitor .............................................................. 1-2 1.4 Connect cables............................................................................. 1-3
1.4.1 Rear of the LCD monitor.................................................. 1-3 1.5 Monitor introduction .................................................................... 1-4
1.5.1 Using the Controls button ............................................... 1-4 2.1 Adjusting the monitor.................................................................. 2-1 2.2 Detaching the arm/stand (for VESA wall mount) ...................... 2-2 2.3 Outline dimension........................................................................ 2-3 3.1 OSD (On-Screen Display) menu ................................................. 3-1
3.1.1 How to reconfigure .......................................................... 3-1 3.1.2 OSD Function Introduction .............................................. 3-2 3.2 Specifications............................................................................... 3-8 3.3 Troubleshooting (FAQ)................................................................ 3-9 3.4 Supported Timing List ............................................................... 3-10
Copyright © 2019 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. ("ASUS"). Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe.
ii
Notices
Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: · This device may not cause harmful interference, and · This device must accept any interference received including
interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003.
iii
Safety information
· Before setting up the monitor, carefully read all the documentation that came with the package.
· To prevent fire or shock hazard, never expose the monitor to rain or moisture.
· Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury.
· If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
· Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
· Slots and openings on the back or top of the cabinet are provided for ventilation. Do not block these slots. Never place this product near or over a radiator or heat source unless proper ventilation is provided.
· The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your dealer or local power company.
· Use the appropriate power plug which complies with your local power standard.
· Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
· Avoid dust, humidity, and temperature extremes. Do not place the monitor in any area where it may become wet. Place the monitor on a stable surface.
· Unplug the unit during a lightning storm or if it will not be used for a long period of time. This will protect the monitor from damage due to power surges.
· Never push objects or spill liquid of any kind into the slots on the monitor cabinet.
· To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100 ~ 240V AC.
· The socket-outlet shall be installed near the equipment and shall be easily accessible
· If you encounter technical problems with the monitor, contact a qualified service technician or your retailer.
· Provide an earthing connection before the mains plug is connected to the mains. And, when disconnecting the earthing connection, be sure to disconnect after pulling out the mains plug from the mains.
iv
WARNING Usage of other than specified head- or earphones can result in hearing loss due to excessive sound pressures. Please confirm the distribution system in building installation shall provide the circuit breaker rated 120/240V, 20A (maximum). If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature. Declaration of Conformity This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive (2011/65/EU). This product has been tested and found to comply with the harmonized standards for Information Technology Equipment, these harmonized standards published under Directives of Official Journal of the European Union.
v
Care & Cleaning
· Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord.
· Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
· Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended for use with the LCD. Never spray cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor: · The screen may flicker during the initial use due to the nature of the
fluorescent light. Turn off the Power Switch and turn it on again to make sure that the flicker disappears. · You may find slightly uneven brightness on the screen depending on the desktop pattern you use. · When the same image is displayed for hours, an afterimage of the previous screen may remain after switching the image. The screen will recover slowly or you can turn off the Power Switch for hours. · When the screen becomes black or flashes, or cannot work anymore, contact your dealer or service center to fix it. Do not repair the screen by yourself!
Conventions used in this guide WARNING: Information to prevent injury to yourself when trying to complete a task.
CAUTION: Information to prevent damage to the components when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.
vi
Where to find more information Refer to the following sources for additional information and for product and software updates.
1. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com
2. Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.
Restriction on Hazardous Substances statement (India) This product complies with the "India E-Waste (Management) Rules, 2016" and prohibits use of Lead, Mercury, Hexavalent Chromium, polybrominated biphenyls(PBBs) and polybrominated diphenyl ethers(PBDEs) in concentration exceeding 0.1% by weight in homogenous materials and 0.01% by weight in homogenous materials for cadmium, except of exemptions listed in Schedule 2 of the Rule.
Disposal of waste equipment by user in private household in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information ab ut where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
vii
1.1 Welcome!
Thank you for purchasing the ASUS® LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the monitor brings you!
1.2 Package contents
Check your package for the following items: LCD Monitor Quick Start Guide Warranty Card 1x Power Adapter 1x DisplayPort Cable (optional) 1x HDMI Cable (optional) 1x USB3.0 Cable (optional)
· If any of the above items is damaged or missing, contact your retailer immediately.
ASUS LCD Monitor VG28UQL1A Series
1-1
1.3 Assembling the monitor
To assemble the monitor:
· While assembling the monitor arm/base, we recommend that you keep the monitor inside its EPS (Expanded Polystyrene) packaging.
1. Align the screw hole on the arm with the bundled screw on the base. Then insert the base into the arm.
2. Fix the base to the arm by fastening the bundled screw.
1
2
1 2
1-2
Chapter 1: Product Introduction
1.4 Connect cables
1.4.1 Rear of the LCD monitor
DCIN
12 3 4
HDMI4 HDMI3 HDMI2 HDMI1
5 6 7 8 9 10
1. DC-IN Port 2. USB Upstream Port 3. USB Downstream Port 4. USB Downstream Port 5. HDMI-4V2.0 6. HDMI-3V2.0 7. HDMI-2V2.1 8. HDMI-1V2.1 9. DisplayPort 10. Earphone - out Port
ASUS LCD Monitor VG28UQL1A Series
1-3
1.5 Monitor introduction
1.5.1 Using the Controls button
Use the control button on the bottom of the monitor to adjust the image settings.
6
6
5
5
4
4
3
3
2 2
1
1. Power Indicator: · The color definition of the power indicator is as the below table.
Status White Amber OFF
Description ON Standby mode OFF
2.
Power Button:
· Press this button to turn the monitor on/off.
3.
GameVisual:
· Press this hotkey to switch from eight video preset modes (Scenery Mode, Racing Mode, Cinema Mode, RTS/RPG Mode, FPS Mode, sRGB Mode, MOBA Mode and User Mode) with GameVisualTM Video Intelligence Technology.
4.
GamePlus Button:
· GamePlus: The GamePlus Function provides a toolkit and creates a better gaming environment for users when playing different types of games. Particularly, Crosshair function is specially designed for new gamers or beginners interested in First Person Shooter (FPS) games.
To active GamePlus:
· Press GamePlus Button to enter the GamePlus main menu.
1-4
Chapter 1: Product Introduction
· Activate Crosshair, Timer or FPS Counter or Display Alignment function.
· Move the ( ) button up/down to select and press ( ) to confirm the function needed. Press to go off, and exit.
· Crosshair/Timer/FPS Counter is movable by pressing 5-way key. · To activate Sniper, you need to disable HDR on your device.
GamePlus main menu
GamePlus-Crosshair GamePlus-Timer
Sniper
GamePlus-Sniper
5.
Close Button:
· Exit the OSD menu.
6.
(5-way) Button:
· Turns on the OSD menu. Enacts the selected OSD menu item.
· Increases/Decreases values or moves your selection up/down/left/right
ASUS LCD Monitor Series
1-5
2.1 Adjusting the monitor
· For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you.
· Hold the stand to prevent the monitor from falling when you change its angle.
· You can adjust the monitor's angle from +20° to -5° and it allows 15° swivel adjustment from either left or right. You can also adjust the monitor's height within 12cm.You can also adjust the monitor's pivot within 90°.
-5 ~ 20
15°
15°
12cm
90°
90°
ASUS LCD Monitor Series
2-1
2.2 Detaching the arm/stand (for VESA wall mount)
The detachable stand of this monitor is specially designed for VESA wall mount.
To detach the arm/stand
1. Disconnect power and signal cables. Carefully put the monitor facedown on its EPS packaging.
2. Remove the screws covers.
3. Remove the four (4) screws securing the arm to the rear of the monitor.
4. Detach the stand (arm and base) from the monitor.
2-2
Chapter 2: Setup
2.3 Outline dimension
Unit: mm
ASUS LCD Monitor VG28UQL1A Series
2-3
3.1
3.1.1
OSD (On-Screen Display) menu
How to reconfigure
Gaming
ASUS TUF Gaming VG28UQL1A HDR OFF Racing Mode DisplayPort 3840x2160 144Hz
Overclocking Variable OD Adaptive-Sync ELMB/ELMB SYNC GamePlus GameVisual Shadow Boost
1. Press Central of 5-way to activate the OSD menu.
2. Press the and buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted.
3. To select the highlighted item on the menu press the Center key.
4. Press the and buttons to select the desired parameter.
5. Press the Center key to enter the slide bar and then use the or buttons, according to the indicators on the menu, to make your changes.
6. Press the / to move left / right menu.
ASUS LCD Monitor VG28UQL1A Series
3-1
3.1.2 OSD Function Introduction
1. Gaming
Gaming
ASUS TUF Gaming VG28UQL1A HDR OFF Racing Mode DisplayPort 3840x2160 144Hz
Overclocking Variable OD Adaptive-Sync ELMB/ELMB SYNC GamePlus GameVisual Shadow Boost
· Overclocking: This function allows you to adjust the refresh rate.
· Variable OD: Speeds up the response time by Over Drive technology. Including Level 0~Level 5.
· Adaptive-Sync (DP)/ FreeSync Premium (HDMI): It can allow a AdaptiveSync (DP)/ FreeSync Premium (HDMI) supported graphics source to dynamically adjust display refresh rate based on typical content frame rates for power efficient, virtually stutter free and low-latency display update.
· ELMB/ELMB SYNC: Allows you to turn on the function when AdaptiveSync (DP)/ FreeSync Premium (HDMI) is On. This function eliminates screen tearing, reduces ghosting and motion blur when playing games. When Adaptive-Sync (DP)/ FreeSync Premium (HDMI) is Off, this function can only be activated when the refresh rate is 100Hz 120Hz, 144Hz.
· GamePlus: Activate Crosshair, Timer, FPS Counter, Display Alignment, or Sniper
· GameVisual: This function contains seven sub-functions that you can select for your preference.
· Shadow Boost:Dark color enhancement adjust monitor gamma curve to enrich the dark tones in an image making dark scenes and objects much easier be found.
· In the Racing Mode, the Saturation, and ASCR functions are not userconfigurable.
· In the sRGB Mode, the Saturation, Skin Tone, Color Temp., Brightness, Contrast and ASCR functions are not user-configurable.
· In the MOBA Mode, the Saturation and ASCR functions are not userconfigurable
3-2
Chapter 3: General Instruction
2. Image
You can adjust Brightness, Contrast, HDR, VividPixel , Aspect Control and Blue Light Filter from this main function.
Image
Brightness Contrast HDR Vividpixel Dynamic Dimming ASCR Aspect Control Blue Light Filter
ASUS TUF Gaming VG28UQL1A HDR OFF Racing Mode DisplayPort 3840x2160 144Hz
· Brightness: The adjusting range is from 0 to 100.
· Contrast: The adjusting range is from 0 to 100.
· HDR: High Dynamic Range. Contains three HDR modes (ASUS Cinema HDR, ASUS Gaming HDR and Console Mode).
· Dynamic Dimming: Dynamic local dimming, turn on this feature to improve the dynamic contrast.
· VividPixel: ASUS Exclusive Technology that brings lifelike visuals for crystal-clear and detail-oriented enjoyment. The adjusting range is from 0 to 100.
· ASCR: Select ON or OFF to enable or disable dynamic contrast ratio function.
· Aspect Control: Adjusts the aspect ratio to "Full" and 4:3, 16:9 (24"W) .
· Blue Light Filter: Adjust the energy level of blue light emitted from LED backlight.
ASUS LCD Monitor VG28UQL1A Series
3-3
· When Blue Light Filter is activated,the default settings of Standard Mode will be automatically imported.
· Between Level 1 to Level 3, the Brightness function is user-configurable. · Level 4 is optimized setting. The Brightness function is not user-configurable · The Monitor use low blue light panel and compliance with TÜV Rheinland at
factory reset/default setting mode.
· 4:3 is only available when input source is in 4:3 format
Please refer to the following to alleviate eye strains:
· Users should take some time away from the display if working for long hours. It is advised to take short breaks (at least 5 mins) after around 1 hour of continuous working at the computer. Taking short and frequent breaks is more effective than a single longer break.
· To minimize eye strain and dryness in your eyes, users should rest the eye periodically by focusing on objects that are far away.
· Eye exercises can help to reduces eye strain. Repeat these exercises often. If eye strain continues please consult a physician. Eye exercises: (1) Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes diagonal.
· High energy blue light may lead to eye strain and AMD (Age-Related Macular Degeneration). Blue light Filter to reduce 70% (max.) harmful blue light to avoiding CVS (Computer Vision Syndrome).
3-4
Chapter 3: General Instruction
3. Color Select the image color you like from this function.
Color
Color Temp. Gamma Saturation Skin Tone
ASUS TUF Gaming VG28UQL1A HDR OFF Racing Mode DisplayPort 3840x2160 144Hz
· Color Temp.: Contains three preset color modes (Cool, Normal, Warm) and User Mode.
· Gamma: Contains five gamma modes including 1.8, 2.2, 2.5. · Saturation: The adjusting range is from 0 to 100. · Skin Tone: Contains three color modes including Reddish, Natural, and
Yellowish
· In the User Mode, colors of R (Red), G (Green), and B (Blue) are userconfigurable; the adjusting range is from 0 ~ 100.
ASUS LCD Monitor VG28UQL1A Series
3-5
4. Input Select
Select your desired input source and toggle the Auto Input Detection function between on and off. The monitor input source will not automatically switch when the Auto Input Detection function is disabled.
Input Select
HDMI-1 (v 2.1) HDMI-2 (v 2.1) HDMI-3 (v 2.0) HDMI-4 (v 2.0) DisplayPort Auto Input Detection
ASUS TUF Gaming VG28UQL1A HDR OFF Racing Mode DisplayPort 3840x2160 144Hz
5. PIP/PBP Setup
The PIP/PBP Setup allows you to open up sub-window(s) connected from any video source.
PIP/PBP Setup
PIP/PBP Mode PIP/PBP Source Color Setting PIP Size
ASUS TUF Gaming VG28UQL1A HDR OFF Racing Mode DisplayPort 3840x2160 144Hz
· PIP/PBP Mode: Select PIP, PBP or turn it off. · PIP/PBP Source: Selects the video input source among, HDMI-1
(v 2.1), HDMI-2 (v 2.1), , HDMI-3 (v 2.0), HDMI-4 (v 2.0) or DisplayPort. · Color Setting:Adjust the Color Setting. · PIP Size: Adjust the PIP size to "Small", "Middle", or "Large".
6. MyFavorite You can adjust Shortcut and Customized Setting from this main function.
3-6
Chapter 3: General Instruction
MyFavorite
Shortcut Custormized Setting
ASUS TUF Gaming VG28UQL1A HDR OFF Racing Mode DisplayPort 3840x2160 144Hz
· Shortcut : User can select from "GamePlus", "GameVisual", "Brightness", "Contrast", "PIP/PBP Setup","Input Select","HDR","Blue Light Filter", "Color Temp.", "Volume" ,"MyFavorite-1 (Load)","MyFavorite-2 (Load)" and set as shortcut key.
· Customized Setting : You can do your setting according to your favorite.
7. System Setup
Adjusts the system configuration.
System Setup
Language Sound ECO Mode Power Setting Power Indicator Power Key Lock Key Lock OSD Setup
ASUS TUF Gaming VG28UQL1A HDR OFF Racing Mode DisplayPort 3840x2160 144Hz
System Setup
DisplayPort Stream DSC HDMI CEC Information All Reset
ASUS TUF Gaming VG28UQL1A HDR OFF Racing Mode DisplayPort 3840x2160 144Hz
· Language: Select OSD language. The selections are: English, French, German, Spanish, Italian, Dutch, Russian, Poland, Czech, Croatia, Hungary, Romania, Portugal, Turkey, Simplified Chinese, Traditional Chinese, Japanese, Korean, Persian, Thai , Indonesian, Ukrainian.
ASUS LCD Monitor VG28UQL1A Series
3-7
· SoundAdjusts the output volume level or mute the audio. · ECO Mode: Activate the ecology mode for power saving. · Power Setting: Standard Mode or Power Saving Mode. · Power Indicator: Turn the power LED indicator on/off. · Power Key Lock: To disable / enable power key. · Key Lock: Disable all key functions. Pressing the down button for more
than five seconds to disable key lock function. · OSD Setup: Adjusts the OSD Timeout, DDC/CI, and Transparency of the
OSD screen. · DisplayPort Stream:Switch DP Version to 1.2 or 1.4. · DSC: Turn the DSC on/off. · HDMI CEC: Turn the HDMI CEC on/off. · Information: Displays the monitor information. · All Reset: Selects "Yes" to revert all settings to the factory default mode
3-8
Chapter 3: General Instruction
3.2 Specifications
Model
Panel Size Max. Resolution Brightness (Typ.) Intrinsic Contrast Ratio (Typ.) Viewing Angle (CR=10) Display Colors Color Saturation Response Time Satellite Speaker Earphone Output Sound from HDMI HDMI input DisplayPort input Power ON Consumption(Max.) Chassis Colors Power saving mode Power off mode Tilt Phys. Dimension (WxHxD) Box Dimension (WxHxD) Net Weight (Esti.) Gross Weight (Esti.) Voltage Rating
VG28UQL1A
28"W 3840x2160@144Hz
300cd/m2 1000:1 178°(V) /178°(H) 1073.7M(10 bit) DCI-P3 90% (min) 1ms (G To G ) 2W x 2 stereo
Yes Yes Yes Yes < 70 W* Black < 0.5W < 0.5W -5° ~ +20° 639.5x539.8x213.8 mm 716 x 446 x 224 mm 6.89 kg 10.4 kg Adapter 20Vdc, 6A
ASUS LCD Monitor VG28UQL1A Series
3-9
3.3 Troubleshooting (FAQ)
Problem
Possible Solution
Power LED is not ON
· Press the button to check if the monitor is in the
ON mode. · Check if the power cord is properly connected to
the monitor and the power outlet. · Check Power Indicator function in main menu OSD.
Select "ON" to turn on power LED.
The power LED lights amber and · Check if the monitor and the computer are in the
there is no screen image
ON mode.
· Make sure the signal cable is properly connected
the monitor and the computer.
· Inspect the signal cable and make sure none of the
pins are bent.
· Connect the computer with another available
monitor to check if the computer is properly
working.
Screen image is too light or dark · Adjust the Contrast and Brightness settings via OSD.
Screen image bounces or a wave pattern is present in the image
· Make sure the signal cable is properly connected to
the monitor and the computer. · Move electrical devices that may cause electrical
interference.
Screen image has color defects (white does not look white)
· Inspect the signal cable and make sure that none of
the pins are bent. · Perform Reset via OSD. · Adjust the R/G/B color settings or select the Color
Temperature via OSD.
No sound or sound is low
· Adjust the volume settings of both your monitor and
computer. · Make sure the computer sound card driver is
properly installed and activated.
3-10
Chapter 3: General Instruction
3.4 Supported Timing List
HDMI2.0
Support Timing table
(PC timing)
1
640x480 60Hz
1
2
640x480 67Hz
2
3
640x480 72Hz
3
4
640x480 75Hz
4
5
720x400 70Hz
5
6
800x600 56Hz
6
7
800x600 60Hz
7
8
800x600 72Hz
8
9
800x600 75Hz
9
10
1024x768 60Hz
10
11
1024x768 70Hz
11
12
1024x768 75Hz
12
13
1152x864 75Hz
13
14
1280x720 60Hz
14
15
1280x960 60Hz
16
1280x1024 60Hz
17
1280x1024 75Hz
18
1440x900 60Hz
19
1680x1050 60Hz
20
1920x1080 60Hz
21
1920x2160 60Hz
22
2560x1440 120Hz
23
2560x1440 144Hz
24
3840x2160 60Hz
Support Timing table (Video timing)
720x480P 60Hz 720x576P 50Hz
1440x480P 60Hz
1440x576P 50Hz 1280x720P 50Hz 1280x720P 60Hz 1920x1080 P 50Hz 1920x1080P 60Hz 1920x1080P 120Hz 3840x2160P 24Hz 3840x2160P 25Hz 3840x2160P 30Hz 3840x2160P 50Hz 3840x2160P 60Hz
ASUS LCD Monitor VG28UQL1A Series
3-11
HDMI2.1
Support Timing table
(PC timing)
1
640x480 60Hz
1
2
640x480 67Hz
2
3
640x480 72Hz
3
4
640x480 75Hz
4
5
720x400 70Hz
5
6
800x600 56Hz
6
7
800x600 60Hz
7
8
800x600 72Hz
8
9
800x600 75Hz
9
10
1024x768 60Hz
10
11
1024x768 70Hz
11
12
1024x768 75Hz
12
13
1152x864 75Hz
13
14
1280x720 60Hz
14
15
1280x960 60Hz
15
16
1280x1024 60Hz
17
1280x1024 75Hz
18
1440x900 60Hz
19
1680x1050 60Hz
20
1920x1080 60Hz
21
1920x2160 60Hz
22
2560x1440 119.8Hz
23
2560x1440 144Hz
24
3840x1600 144Hz
25
3840x2160 60Hz
26
3840x2160 100Hz
27
3840x2160 144Hz
Support Timing table (Video timing)
640x480P 60Hz 720x480P 60Hz
720x576P 50Hz
1440x480P 60Hz 1440x576P 50Hz 1280x720P 50Hz 1280x720P 60Hz 1920x1080 P 50Hz 1920x1080P 60Hz 3840x2160P 24Hz 3840x2160P 25Hz 3840x2160P 30Hz 3840x2160P 50Hz 3840x2160P 60Hz 3840x2160P 120Hz
3-12
Chapter 3: General Instruction
DP1.4(HDR400)
Support Timing table
1
640x480 60Hz
1
2
640x480 67Hz
2
3
640x480 72Hz
3
4
640x480 75Hz
4
5
720x400 70Hz
5
6
800x600 56Hz
6
7
800x600 60Hz
7
8
800x600 72Hz
8
9
800x600 75Hz
9
10
1024x768 60Hz
10
11
1024x768 70Hz
11
12
1024x768 75Hz
12
13
1152x864 75Hz
13
14
1280x720 60Hz
15
1280x960 60Hz
16
1280x1024 60Hz
17
1280x1024 75Hz
18
1440x900 60Hz
19
1680x1050 60Hz
20
1920x1080 60Hz
21
1920x2160 60Hz
22
2560x1440 120Hz
23
2560x1440 144Hz
24
3840x2160 60Hz
25
3840x1600 144Hz
26
3840x2160 100Hz
27
3840x2160 120Hz
28
3840x2160 144Hz
Support Timing table 1440x480P 60Hz
1440x576P 50Hz 1280x720P 50Hz 1280x720P 60Hz 1280x720P 120Hz 1920x1080 P 50Hz 1920x1080P 60Hz 1920x1080P 120Hz 3840x2160P 24Hz 3840x2160P 25Hz 3840x2160P 30Hz 3840x2160P 50Hz 3840x2160P 60Hz
* The modes not listed in the above tables may not be supported. For optimal resolution, we recommend that you choose a mode listed in the above tables.
ASUS LCD Monitor VG28UQL1A Series
3-13
3-14
Chapter 3: General Instruction