Manuals+

Traxxas T-Maxx® (Model 49077-3) Parts List

Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically.

Air Filters

  • 5262: Air filter and pre-filter inserts, foam (high-volume) (3) (pre-oiled, assembled) (TRX 2.5, 2.5R, 3.3)
  • 5267: Air filter body (high-volume)/ filter support/cap/ foam filter, pre-filter/ T-Maxx® filter base (angled)/ wire mount/ hardware (1 each) (Fits Maxx® trucks) (TRX® 2.5, 2.5R, 3.3)
  • 5263: Oil, air filter

Bearings & Bushings

  • 4611: Ball bearings (5x11x4mm) (2)
  • 2728: Ball bearings (5x8x2.5mm) (2)
  • 5119: Ball bearings, blue rubber sealed (10x15x4mm) (2)
  • 5116: Ball bearings, blue rubber sealed (5x11x4mm) (2)
  • 5114: Ball bearings, blue rubber sealed (5x8x2.5mm) (2)
  • 5117: Ball bearings, blue rubber sealed (6x12x4mm) (2)
  • 5180: Ball bearings, blue rubber sealed (6x13x5mm) (2)
  • 5118: Ball bearings, blue rubber sealed (8x16x5mm) (2)
  • 2545: Bellcrank bushings (plastic) (5x8x2.5mm) (4)

Body & Accessories

  • 1926: Antenna caps, vinyl (2)/ antenna spool
  • 5526: Antenna crimp nut, aluminum (blue-anodized)/ antenna nut tools
  • 5526R: Antenna crimp nut, aluminum (red-anodized)/ antenna nut tools
  • 1726: Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)
  • 3170X: Battery holder, 4-cell/ on-off switch
  • 3935: Body clip (mounting clip), angled, 90-degrees (10)
  • 3935A: Body clip (mounting clip), angled, 90-degrees (black) (10)
  • 1834: Body clips (12) (standard size)
  • 3934: Body clips, heavy duty (12)
  • 4914R: Body mount posts, front (2)/ body mount, rear/ body mount screw pins (4)
  • 1815: Body washers (8)
  • 4915: Body washers, foam adhesive (10)
  • 4921: Body, T-Maxx® (long wheelbase) (clear, requires painting)/ window, lights decal sheet
  • 4921X: Body, T-Maxx®, ProGraphix® (long wheelbase) (replacement for painted body. Graphics are painted, requires paint and final color application)/ window, grille, lights decal sheet
  • 2514: Decal sheet, racing sponsors
  • 4920X: Decal sheets, T-Maxx® 3.3 (long wheelbase) (model 4908)
  • 9950: Official Team Traxxas® racing decal set (flag logo/6-color)
  • 5185: Tires, rubber (2) (fits Traxxas® wheelie bar wheels)
  • 4974: Wheelie bar arm (1)/ connector (1)/ 3x12 SS (hex drive) (4)
  • 4977: Wheelie bar mount (1)
  • 4975: Wheelie bar, assembled (fits all T-Maxx® and E-Maxx® trucks)
  • 4976: Wheels (4)/ axles (2) (for T-Maxx®/E-Maxx wheelie bar)
  • 5186A: Wheels, aluminum (blue-anodized) (2)/ 5x8mm ball bearings (4)/ axles (2)/ rubber tires (2)
  • 5186: Wheels, aluminum (red-anodized) (2)/ 5x8mm ball bearings (4)/ axles (2)/ rubber tires (2)

Brake Components

  • 4966: Brake adapter, hex aluminum (blue)
  • 4967: Brake cam (blue)/ cam lever/ 3mm set screw
  • 5364: Brake disc (40mm steel)
  • 5364X: Brake disc (high performance, vented)
  • 5365: Brake pad set (inner and outer calipers with bonded friction material)
  • 4978: Screws, 3x21mm button-head machine (hex drive) (partially threaded, Revo brake bolts) (6)

Bumpers & Skidplates

  • 3930: Bulkhead cross braces (2)/ 3x25mm CS screws (8)
  • 4936: Bumper mounts, front (l&r)/ bumper mounts, rear (l&r)/ 3x12mm RHM screws (8)
  • 4935X: Bumpers, 6061-T6, brushed aluminum (f&r)
  • 4935: Bumpers, satin finished (f&r)
  • 2579: Screws, 3x15mm button-head machine (hex drive) (6)
  • 4937: Skidplate, front plastic/ stainless steel plate (black)
  • 4937A: Skidplate, front plastic (gray)/ stainless steel plate
  • 4938: Skidplate, rear plastic/ stainless steel plate (black)
  • 4938A: Skidplate, rear plastic (gray)/ stainless steel plate
  • 4969: Skidplate, transmission, nylon (gray) (for long wheelbase chassis)
  • 5185: Tires, rubber (2) (fits Traxxas® wheelie bar wheels)
  • 4974: Wheelie bar arm (1)/ connector (1)/ 3x12 SS (hex drive) (4)
  • 4977: Wheelie bar mount (1)
  • 4975: Wheelie bar, assembled (fits all T-Maxx® and E-Maxx® trucks)
  • 4976: Wheels (4)/ axles (2) (for T-Maxx®/E-Maxx wheelie bar)

Chassis & Attachments

  • 3170X: Battery holder, 4-cell/ on-off switch
  • 4925X: Box, battery (gray)/ adhesive foam chassis pad/charge jack plug (rubber)
  • 5122X: Box, receiver (upper and lower halves)/ clip (1)/ foam pad
  • 5167: Chassis braces, lower (black) (for long wheelbase chassis) (2)
  • 5114: Chassis, T-Maxx®, long wheelbase (extended 30mm) (6061-T6 aluminum, 4.0mm) (blue anodized)
  • 5167: Slide carb linkage bellcrank post/5x8x2.5 plastic bushing (2)/ bellcrank/ 5x8x0.5 fiber washer (2)/ 3x10 WM
  • 5185: Tires, rubber (2) (fits Traxxas® wheelie bar wheels)
  • 4974: Wheelie bar arm (1)/ connector (1)/ 3x12 SS (hex drive) (4)
  • 4977: Wheelie bar mount (1)
  • 4975: Wheelie bar, assembled (fits all T-Maxx® and E-Maxx® trucks)
  • 4976: Wheels (4)/ axles (2) (for T-Maxx®/E-Maxx wheelie bar)
  • 5186A: Wheels, aluminum (blue-anodized) (2)/ 5x8mm ball bearings (4)/ axles (2)/ rubber tires (2)
  • 5186: Wheels, aluminum (red-anodized) (2)/ 5x8mm ball bearings (4)/ axles (2)/ rubber tires (2)

Clutch & Related Parts

  • 4611: Ball bearings (5x11x4mm) (2)
  • 4120: Clutch bell, (20-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip (requires #4611-ball bearings, 5x11x4mm (2))
  • 4122: Clutch bell, (22-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip (requires #4611-ball bearings, 5x11x4mm (2))
  • 4124: Clutch bell, (24-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip (requires #4611-ball bearings, 5x11x4mm (2))
  • 4146X: Clutch shoes (2)/ spring (T-Maxx®/Revo®/Jato®/Nitro 4-Tec®)
  • 3281: Cone, split beveled
  • 1633: E-clips/ C-rings
  • 6542X: Flywheel (large, knurled for use with starter boxes)
  • 5244: Fly wheel nut (TRX® 2.5, 2.5R, 3.3)
  • 6542: Fly wheel with magnet (35mm)
  • 1985: PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings)

Differential Components

  • 5119: Ball bearings, blue rubber sealed (10x15x4mm) (2)
  • 5117: Ball bearings, blue rubber sealed (6x12x4mm) (2)
  • 5118: Ball bearings, blue rubber sealed (8x16x5mm) (2)
  • 5381: Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/6x10x0.5 TW
  • 5136X: Differential oil kit (1 each: 10K, 30K, 50K weights)
  • 5382X: Gear set, differential (output gears (2)/ spider gears (2)/ spider gear shaft/ diff carrier support)
  • 3979: Housings, differential (left & right)/ pinion collar (1)
  • 5130: Oil, differential (100K wt) (0.7 oz (20cc))
  • 5135: Oil, differential (10K wt)
  • 5136: Oil, differential (30K wt)
  • 5039: Oil, differential (500K wt)
  • 5137: Oil, differential (50K wt)
  • 5379X: Ring gear, differential/ pinion gear, differential
  • 5379R: Ring gear, differential/ pinion gear, differential (machined, spiral cut) (front)
  • 3965: Screws, 2.5x8mm cap-head machine (6)

Driveline Components

  • 5334: Axle carriers, left & right (1 each)
  • 5334R: Axle carriers, left & right (1 each) (use with larger 6x13mm ball bearings)/ bearing adapters (for 6x12mm ball bearings) (2)/ dust boot retainers (4)
  • 5459: Boots, driveshaft (rubber) (2)
  • 5153: Drive cups, inner (2) Revo®/ E-Revo® (first generation)/ T-Maxx®/ E-Maxx (steel constant-velocity driveshafts)/ screw pin, M4/15 (2)
  • 5451X: Driveshaft assembly (1), left or right (fully assembled, ready to install)/ 4x15mm screw pin (1)
  • 5154: Driveshaft, steel constant-velocity, Revo®/E-Revo® (first generation)/T-Maxx®/E-Maxx (shaft only, 128.5mm)/ drive cup pin (1)
  • 5451R: Driveshafts, Revo®/ E-Revo® (first generation)/ T-Maxx®/ E-Maxx (steel constant-velocity) (assembled w/inner & outer dust boots) (for models w/ 6mm axles) (4)
  • 5150: E-clips, 1.5mm (24)

Half Shafts, etc.

  • 5456: Half shafts, center front (Revo 3.3) (internal splined (1)/ external splined (1)/ center rear (internal splined (1)/ external splined (1)) (plastic parts only)
  • 4955: Pins, axle (2.5x12mm) (4)
  • 5129: Rebuild kit (for Revo®/E-Revo® (first generation)/T-Maxx®/ E-Maxx steel constant-velocity driveshafts) (includes pins, dustboots, & lube for 2 driveshafts assemblies)
  • 5145: Screw pin, 4x15mm (6)
  • 5189: Screw pins, 4x13mm (with threadlock) (4)
  • 5454: Stub axle (steel) (2)
  • 5166: Stub axle, (1)/ axle sleeve (1) Revo®/T-Maxx®/E-Maxx (steel constant-velocity driveshaft)
  • 5452: U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm cross pin (4)/ e-clips (20)) (metal parts for 2 driveshafts)
  • 4954: Wheel hubs, hex (2)/ axle pins (2.5x12mm) (2)
  • 4954R: Wheel hubs, hex (steel)
  • 4954X: Wheel hubs, hex, 6061-T6 aluminum (blue) (4)/ axle pins (2.5x10mm) (4)
  • 5353X: Wheel hubs, splined, 17mm (blue-anodized) (4)/ wheel nuts, splined, 17mm (blue-anodized) (4)/ screw pins, 4x13mm (with threadlock) (4)
  • 5353G: Wheel hubs, splined, 17mm (green-anodized) (4)/ wheel nuts, splined, 17mm (blue-anodized) (4)/ screw pins, 4x13mm (with threadlock) (4)
  • 5353R: Wheel hubs, splined, 17mm (red-anodized) (4)/ wheel nuts, splined, 17mm (red-anodized) (4)/ screw pins, 4x13mm (with threadlock) (4)
  • 5353: Wheel nuts, splined, 17mm (blue-anodized) (4)
  • 5353A: Wheel nuts, splined, 17mm (green-anodized) (4)
  • 5457: Yoke, brake (1)/ torque pins (2)/ 4x15mm screw pin
  • 5458X: Yokes, differential and transmission (2)/ 4x15mm screw pins (2)
  • 5453: Yokes, stub axle (2)/ pins (2)

Engine & Servo Mounts

  • 5160: Engine mount, aluminum/3x10 CS with washers (8)
  • 4960X: Engine mount, machined 6061-T6 aluminum (blue) (w/ screws) (T-Maxx® Series)
  • 3159: Screws, 3x10mm cap-head machine (hex drive) (6)/ lock washers (6)/ hex wrench
  • 4918: Servo mounts, steering/ shift (f&r) (black)
  • 4918X: Servo mounts, steering/ shift (machined aluminum) (blue) (f&r)/ machine screws (8)
  • 4918A: Servo mounts, steering/shift (f&r) (gray)
  • 4919X: Servo mounts, throttle/ brake (machined aluminum) (blue) (f&r)/ machine screws (8)
  • 4919A: Servo mounts, throttle/brake (1) (gray)

Engine Components

  • 5238R: Cooling head, PowerTune (machined aluminum, blue-anodized) (TRX® 3.3), head protector (1), 3x6mm CCS (5)
  • 3232X: Glow plug, super-duty (long-medium)/gasket
  • 5228: Head protector, cooling head (1)/3x6mm CCS (5) (TRX® 3.3)
  • 5290: Piston/sleeve (matched set), wrist pin clips (2) (TRX® 3.3)
  • 5211R: Roller clutch/6x8x0.5 TW (1) (also called one-way bearing) (TRX 2.5, 2.5R, 3.3)
  • 4859: Screws, 3x10mm flat-head machine (hex drive) (4)
  • 3932: Screws, 3x6mm flat-head machine (hex drive) (6)
  • 5277: Shaft, starter (TRX® 2.5, 2.5R, 3.3)
  • 5170: Starter, recoil (complete with screws) (TRX 2.5, 2.5R, 3.3)

Exhaust

  • 3155: Cable ties, medium (black) (6)
  • 3296: Fittings, inlet (nipple) for fuel or water cooling (2)
  • 4961: Hanger, metal wire (for Resonator pipe in T-Maxx® with long wheelbase)/ telemetry sensor wire hold-down clip
  • 5140: Header, aluminum (T-Maxx®) (for rear exhaust engines only) (TRX 2.5, 2.5R, 3.3)
  • 5256: O-ring, header 12.2x1mm (TRX® 2.5, 2.5R, 3.3)
  • 5246: Pipe coupler, molded (for use with pipes 5152 (T Maxx) & 4452R) (TRX 2.5, 2.5R, 3.3)
  • 2577: Screws, 3x10mm button-head machine (hex drive) (6)
  • 5142: Screws, 3x15mm cap-head machine (hex drive) (with split and flat washers) (6)
  • 5487: Tuned pipe, Resonator, R.O.A.R. legal (aluminum, double-chamber) (fits T-Maxx® vehicles with TRX® Racing Engines)

EZ Start 2 & Related parts

  • 4579: Connector, wiring harness (EZ-Start® and EZ-Start® 2)
  • 5280: Control box (complete) (EZ-Start® 2)
  • 5281: Control box battery cover w/ belt clip (EZ-Start® 2)
  • 5273: Cush-drive elements (4) (EZ-Start® 2)
  • 5270R: EZ-Start® 2, complete system with controller, drive unit, wiring harness
  • 5276: Gear set (complete) (EZ-Start® 2)

Front Suspension & Steering

  • 4934X: Aluminum caps, pivot ball (blue-anodized) (4)
  • 5334R: Axle carriers, left & right (1 each) (use with larger 6x13mm ball bearings)/ bearing adapters (for 6x12mm ball bearings) (2)/ dust boot retainers (4)
  • 2728: Ball bearings (5x8x2.5mm) (2)
  • 4944: Bellcrank posts, aluminum (2)/ steering link threaded rod (3x25mm)/ long rod ends (2)
  • 3930: Bulkhead cross braces (2)/ 3x25mm CS screws (8)
  • 4930R: Bulkheads (l & r) (front) (gray)
  • 5134: Caster spacers (4)/ shims (4)
  • 5355: Hollow ball, tall centered (2)/ tall offset hollow ball (2)/ bump steer adjustment shims; 3.5mm (2), 1.17mm (2)
  • 5378X: Pivot ball caps (4)/ dust boots, rubber (4)/ dust plugs, rubber (4)/ dust boot retainers, black (4), blue (4) (2 pkgs. req. to complete truck)
  • 4933: Pivot balls (4)/ pivot ball cap bushings (4)
  • 4933X: Pivot balls, hard-anodized 7075-T6 aluminum (4)/ pivot ball cap bushings (4)
  • 5347: Rod ends, Revo® (large) with hollow balls (12)
  • 2742X: Rod ends, short (6)/ hollow balls (6)
  • 4859: Screws, 3x10 flathead machine (hex drive) (4)
  • 5345R: Servo horns, steering, long (2), short (2)/ linkage, steering (3x20mm turnbuckle) (2)/ rod ends (short) (4)/ hollow balls (4)
  • 2070: Servo, digital high-torque (ball bearing)
  • 4917R: Shock tower (for rectangular body posts)
  • 4945: Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer (requires 5x11mm BB (2))
  • 5132R: Suspension arms (lower) (2) (fits T-Maxx®/E-Maxx)
  • 5131R: Suspension arms (upper) (2) (fits T-Maxx®/E-Maxx)
  • 5161: Suspension screw pin set, hardened steel (hex drive)
  • 5141A: Toe links, T-Maxx®/E-Maxx (TUBES black-anodized, 7075-T6 aluminum, stronger than titanium) (112mm, front) (2)/ rod ends (4)/ aluminum wrench (1) (For T-Maxx®/E-Maxx models w/sealed pivot ball suspension & 3.8' wheels)
  • 5141R: Toe links, T-Maxx®/E-Maxx (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (112mm, front) (2)/ rod ends (4)/ aluminum wrench (1) (For T-Maxx®/E-Maxx models w/sealed pivot ball suspension & 3.8" wheels)
  • 5141: Turnbuckles, toe links (5.0mm steel) (front) (2)

Fuel Tank & Line

  • 3147: Fuel line (1 foot)
  • 3147X: Fuel line (610mm or 2ft)
  • 4948: Fuel Tank (125cc)
  • 4958: Fuel tank rebuild kit (contains cap, foam washer, o-ring, upper/lower retainers, screw, spring and screw pin)

Fuel, Lubricants & Supplies

  • 5001: Bottle, fuel filler (500cc)
  • 3232X: Glow plug, super-duty (long-medium)/gasket
  • 5148: Grease, white lithium
  • 5263: Oil, air filter
  • 5001R: Rebuild kit, fuel filler bottle (includes bottle lid (1) and dispensing tube caps, rubber (2) (fits 8mm or 5/16" dispensing tube))
  • 5070: Top Fuel®, 20% nitro (gallon)
  • 5020: Top Fuel®, 20% nitro (quart)
  • 5080: Top Fuel®, 33% nitro (gallon)
  • 5030: Top Fuel®, 33% nitro (quart)

Hardware

  • 5526: Antenna crimp nut, aluminum (blue-anodized)/ antenna nut tools
  • 5526R: Antenna crimp nut, aluminum (red-anodized)/ antenna nut tools
  • 3935: Body clip (mounting clip), angled, 90-degrees (10)
  • 3935A: Body clip (mounting clip), angled, 90-degrees (black) (10)
  • 1834: Body clips (12) (standard size)
  • 3934: Body clips, heavy duty (12)
  • 3930: Bulkhead cross braces (2)/ 3x25mm CS screws (8)

Manuals

  • 5299R: Engine Manual, TRX® 2.5, 2.5R, 3.3

Radio System, Batteries & Chargers

  • 1726: Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)
  • 6548: Battery door, transmitter (replacement for #6516, 6517, 6528, 6529, 6530 transmitters)
  • 2914: Battery, Power Cell AA Alkaline (4)
  • 3037: Battery, RX Power Pack (5-cell hump style, NiMH, 1200mAh)
  • 2919: Battery, Series 1 Power Cell 1800mAh (NiMH, 6-C flat, 7.2V, Sub-C)
  • 2734: Cable ties (small) (10)
  • 2977: Charger, DC, 2 amp (Molex) (5-6 cell, 6.0 - 7.2 volt, NiMH)
  • 6525: Communication link, telemetry expander
  • 2978: Fuse, charger, 5A (2) (for #2974, 2975, 2977)
  • 2010: Gear set (for 2018 servos)
  • 2072A: Gear set (for 2070, 2075 servos)
  • 6556: Mount, telemetry expander (fits XO-1®, E-Revo®*, Summit*, all T-Maxx®/E-Maxx® trucks, Revo® 3.3, Slayer Pro 4X4) (*requires rear chassis brace #5632)
  • 6536: Mounts, RPM sensor (nitro engines)/ 3x10mm CS with split and flat washers (2)
  • 6533: Receiver, micro, TQi 2.4GHz with telemetry & TSM (5-channel)
  • 3932: Screws, 3x6mm flat-head machine (hex drive) (6)
  • 6552: Seal kit, expander box (includes o-ring, seals, and silicone grease)
  • 6526: Sensor, auto-detectable, temperature
  • 6527: Sensor, auto-detectable, voltage
  • 6520: Sensor, RPM (long)/ 3x4mm BCS (2)/ 3x4 GS (1)
  • 6521: Sensor, temperature and voltage (long)
  • 2071: Servo case (for 2070 servo)
  • 2074: Servo case/gaskets (for 2056 and 2075 waterproof servos)
  • 2075R: Servo, digital high-speed, metal gear (ball bearing), waterproof
  • 2070: Servo, digital high-torque (ball bearing)
  • 2075: Servo, digital high-torque (ball bearing), waterproof
  • 2075X: Servo, digital high-torque, metal gear (ball bearing), waterproof
  • 6553X: Telemetry expander 2.0 and GPS module 2.0, TQi radio system
  • 6550X: Telemetry expander 2.0, TQi radio system (for use only with #6551X GPS module)
  • 6551X: Telemetry GPS module 2.0, TQi radio system (for use only with #6550X telemetry expander)
  • 6507R: TQi 2.4 GHz High Output radio system, 4-channel with Traxxas Link™ Wireless Module, TSM (4-ch transmitter, 5-ch micro receiver)
  • 6529: Transmitter, TQi Traxxas Link™ enabled, 2.4GHz high output, 3-channel (transmitter only)
  • 6530: Transmitter, TQi Traxxas Link™ enabled, 2.4GHz high output, 4-channel (transmitter only)
  • 6511: Traxxas Link ™ Wireless Module
  • 3034: Wiring harness for RX Power Pack, Traxxas® nitro vehicles (includes on/off switch and charge jack)

Ready-To-Race Model

  • 49077-3: T-Maxx® 3.3: 1/10 Scale Nitro-Powered 4WD Maxx® Monster Truck with TQi™ 2.4GHz Radio System, Traxxas Link™ Wireless Module, and Traxxas Stability Management (TSM)®

Rear Suspension

  • 4934X: Aluminum caps, pivot ball (blue-anodized) (4)
  • 5334: Axle carriers, left & right (1 each)
  • 5334R: Axle carriers, left & right (1 each) (use with larger 6x13mm ball bearings)/ bearing adapters (for 6x12mm ball bearings) (2)/ dust boot retainers (4)
  • 4914R: Body mount posts, front (2)/ body mount, rear/ body mount screw pins (4)
  • 3930: Bulkhead cross braces (2)/ 3x25mm CS screws (8)
  • 4929R: Bulkheads (l & r) (rear) (gray)
  • 5134: Caster spacers (4)/ shims (4)
  • 5355: Hollow ball, tall centered (2)/ tall offset hollow ball (2)/ bump steer adjustment shims; 3.5mm (2), 1.17mm (2)
  • 5378X: Pivot ball caps (4)/ dust boots, rubber (4)/ dust plugs, rubber (4)/ dust boot retainers, black (4), blue (4) (2 pkgs. req. to complete truck)
  • 4933: Pivot balls (4)/ pivot ball cap bushings (4)
  • 4933X: Pivot balls, hard-anodized 7075-T6 aluminum (4)/ pivot ball cap bushings (4)
  • 5347: Rod ends, Revo® (large) with hollow balls (12)
  • 5348: Rod ends, Revo® (large, for rear toe link only) (4)
  • 4917R: Shock tower (for rectangular body posts)
  • 5132R: Suspension arms (lower) (2) (fits T-Maxx®/E-Maxx)
  • 5131R: Suspension arms (upper) (2) (fits T-Maxx®/E-Maxx)
  • 5161: Suspension screw pin set, hardened steel (hex drive)
  • 4956: Tie bar, rear (1) /3x18mm BCS (2) (fits T-Maxx®/E-Maxx)
  • 5143A: Toe links, T-Maxx®/E-Maxx (TUBES black-anodized, 7075-T6 aluminum, stronger than titanium) (124mm, rear) (2)/ rod ends (4)/ aluminum wrench (1) (For T-Maxx®/E-Maxx models w/sealed pivot ball suspension & 3.8' wheels)
  • 5143R: Toe links, T-Maxx®/E-Maxx (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (124mm, rear) (2)/ rod ends (4)/ aluminum wrench (1) (For T-Maxx®/E-Maxx models w/sealed pivot ball suspension & 3.8" wheels)
  • 5143: Turnbuckles, toe links (5.0mm steel) (rear) (2)

Recoil Starter

  • 5277: Shaft, starter (TRX® 2.5, 2.5R, 3.3)
  • 5170: Starter, recoil (complete with screws) (TRX 2.5, 2.5R, 3.3)

Shock Oil

  • 5031: Oil, shock (20 wt, 200 cSt, 60cc) (silicone)
  • 5032: Oil, shock (30 wt, 350 cSt, 60cc) (silicone)
  • 5033: Oil, shock (40 wt, 500 cSt, 60cc) (silicone)
  • 5034: Oil, shock (50 wt, 600 cSt, 60cc) (silicone)
  • 5035: Oil, shock (60 wt, 700 cSt, 60cc) (silicone)
  • 5036: Oil, shock (70 wt, 900 cSt, 60cc) (silicone)
  • 5037: Oil, shock (80 wt, 1,000 cSt, 60cc) (silicone)
  • 5029: Shock oil bottle (60cc) (for mixing shock oil)
  • 5038X: Shock oil set (includes 20 wt, 30 wt, 40 wt, 50 wt, 60 wt, 70 wt, & 80 wt premium shock oils with spinning carousel rack)
  • 1667: Silicone shock oil (30 wt), 60cc
  • 5038: Spinning carousel rack

Shocks (Pro-level Aluminum)

  • 2666: Big Bore shock cylinder (XX-long) (1)
  • 2662: Big Bore shocks (XX-long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (rear) (2)
  • 4962: Big Bore shocks (xx-long) (hard-anodized & PTFE-coated T6 aluminum) (assembled) w/ red springs, TiN shafts (8 pack)

Shocks (Ultra Shocks)

  • 2669: Piston head set (2-hole (2)/ 3-hole (2))/ shock mounting bushings & washers (2) (Big Bore Shocks)
  • 2362: Rebuild kit, Ultra shocks (for 2 shocks)
  • 1942: Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2)
  • 2742X: Rod ends, short (6)/ hollow balls (6)
  • 3962: Set (grub) screws, 3x25mm (8)/ 3mm nylon locknuts (8)
  • 2667: Shock caps, aluminum (Big Bore Shocks) (2)
  • 2656T: Shock shafts, hardened steel, titanium nitride coated (xx-long) (2)
  • 2656: Shock shafts, steel, chrome finish (xx-long) (2)
  • 1765: Silicone diaphragms (4)
  • 2668: Spring retainers, upper & lower (2)/ spring pre-load spacers: 1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore Shocks)
  • 4649R: Springs, red (for big bore shocks) (2.5 rate) (2)
  • 3766A: Body, Ultra Shock(s) (XXL) (gray) (2)
  • 2362: Rebuild kit, Ultra shocks (for 2 shocks)
  • 2742X: Rod ends, short (6)/ hollow balls (6)
  • 3767: Shock caps (2)/ shock bottoms (2)
  • 3767A: Shock caps, aluminum (blue-anodized) (4) (fits all Ultra Shocks)
  • 3767G: Shock caps, aluminum (green-anodized) (4) (fits all Ultra Shocks)
  • 3767T: Shock caps, aluminum (orange-anodized) (4) (fits all Ultra Shocks)
  • 3767P: Shock caps, aluminum (pink-anodized) (4) (fits all Ultra Shocks)
  • 3767X: Shock caps, aluminum (red-anodized) (4) (fits all Ultra Shocks)
  • 2656T: Shock shafts, hardened steel, titanium nitride coated (xx-long) (2)
  • 2656: Shock shafts, steel, chrome finish (xx-long) (2)
  • 3642X: Shoulder screws, Ultra Shocks (3x12 hex drive) (6)
  • 1765: Silicone diaphragms (4)
  • 3769: Spring pre-load spacers: 1mm (4)/ 2mm (2)/4mm (2)/ 8mm (2)
  • 3768: Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/3-hole (2))
  • 4957R: Springs, progressive rate (for Ultra-Shocks only) (progressive rate) (f/r) (4)
  • 3757R: Springs, rear (red) (2.9 rate) (2)
  • 4957: Springs, red (for Ultra Shocks only) (2.5 rate) (f/r) (2)
  • 3762: Ultra Shocks (black) (xx-long) (complete w/ spring pre-load spacers & springs) (rear) (2)
  • 3762A: Ultra shocks (grey) (xx-long) (complete w/ spring pre-load spacers & springs) (2)

Slipper Clutch Components

  • 5116: Ball bearings, blue rubber sealed (5x11x4mm) (2)
  • 5478: Flat wrench, 8mm (blue-anodized aluminum)
  • 5366: Input shaft, transmission (slipper shaft)
  • 5352R: Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))
  • 5352X: Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))
  • 2554: Screws, 3x6mm cap-head machine (hex drive) (6)
  • 5351: Slipper pressure plate and hub (alloy)

Spur Gears

  • 3956: Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch)
  • 3957: Spur gear, 56-tooth (0.8 metric pitch, compatible with 32-pitch)
  • 3958: Spur gear, 58-tooth (0.8 metric pitch, compatible with 32-pitch)
  • 3959: Spur gear, 62-tooth (0.8 metric pitch, compatible with 32-pitch)

Steering Components

  • 2728: Ball bearings (5x8x2.5mm) (2)
  • 5116: Ball bearings, blue rubber sealed (5x11x4mm) (2)
  • 4944: Bellcrank posts, aluminum (2)/ steering link threaded rod (3x25mm)/ long rod ends (2)
  • 2072A: Gear set (for 2070, 2075 servos)
  • 5347: Rod ends, Revo® (large) with hollow balls (12)
  • 2579: Screws, 3x15mm button-head machine (hex drive) (6)
  • 5345X: Servo horns, steering and throttle (for non-Traxxas® servos (Hitec, JR, KO, Airtronics))
  • 5345R: Servo horns, steering, long (2), short (2)/ linkage, steering (3x20mm turnbuckle) (2)/ rod ends (short) (4)/ hollow balls (4)
  • 4918: Servo mounts, steering/ shift (f&r) (black)
  • 4918X: Servo mounts, steering/ shift (machined aluminum) (blue) (f&r)/ machine screws (8)
  • 4918A: Servo mounts, steering/shift (f&r) (gray)
  • 2075R: Servo, digital high-speed, metal gear (ball bearing), waterproof
  • 2070: Servo, digital high-torque (ball bearing)
  • 2075: Servo, digital high-torque (ball bearing), waterproof
  • 2075X: Servo, digital high-torque, metal gear (ball bearing), waterproof
  • 4945: Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer (requires 5x11mm BB (2))
  • 2537: Threaded rods (20/25/44mm 1 ea.)/ (1) 12mm set screw

Suspension Linkage

  • 1633: E-clips/ C-rings
  • 5355: Hollow ball, tall centered (2)/ tall offset hollow ball (2)/ bump steer adjustment shims; 3.5mm (2), 1.17mm (2)
  • 5347: Rod ends, Revo® (large) with hollow balls (12)
  • 2742X: Rod ends, short (6)/ hollow balls (6)
  • 3744: Servo saver w/adapters
  • 3642X: Shoulder screws, Ultra Shocks (3x12 hex drive) (6)
  • 5161: Suspension screw pin set, hardened steel (hex drive)
  • 5141A: Toe links, T-Maxx®/E-Maxx (TUBES black-anodized, 7075-T6 aluminum, stronger than titanium) (112mm, front) (2)/ rod ends (4)/ aluminum wrench (1) (For T-Maxx®/E-Maxx models w/sealed pivot ball suspension & 3.8' wheels)
  • 5143A: Toe links, T-Maxx®/E-Maxx (TUBES black-anodized, 7075-T6 aluminum, stronger than titanium) (124mm, rear) (2)/ rod ends (4)/ aluminum wrench (1) (For T-Maxx®/E-Maxx models w/sealed pivot ball suspension & 3.8' wheels)
  • 5141R: Toe links, T-Maxx®/E-Maxx (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (112mm, front) (2)/ rod ends (4)/ aluminum wrench (1) (For T-Maxx®/E-Maxx models w/sealed pivot ball suspension & 3.8" wheels)
  • 5143R: Toe links, T-Maxx®/E-Maxx (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (124mm, rear) (2)/ rod ends (4)/ aluminum wrench (1) (For T-Maxx®/E-Maxx models w/sealed pivot ball suspension & 3.8" wheels)
  • 5141: Turnbuckles, toe links (5.0mm steel) (front) (2)
  • 5143: Turnbuckles, toe links (5.0mm steel) (rear) (2)

Team Traxxas Items

  • 2514: Decal sheet, racing sponsors
  • 6160X: DVD, Maxx® Power! Full Throttle Action (sleeve)
  • 9950: Official Team Traxxas® racing decal set (flag logo/6-color)
  • 9909: Traxxas® racing banner, red & black (3x7 feet)

Throttle & Brake Linkage

  • 4967: Brake cam (blue)/ cam lever/ 3mm set screw
  • 3182: Collars, screw (2)/ set screws, 3mm (2)
  • 3147X: Fuel line (610mm or 2ft)
  • 4182: Rod guides (2)/ 3mm nylon locknuts (2)
  • 5167: Servo horn, throttle-brake/ shift (1)
  • 5168: Slide carb linkage bellcrank post/ 5x8x2.5 plastic bushing (2)/ bellcrank/ 5x8x0.5 fiber washer (2)/ 3x10 WM
  • 4056: Slide carb linkage set (throttle link, brake link, and hardware)
  • 3184: Springs: throttle/brake/shift (3)

Tires & Wheels

  • 4147X: Nuts, 5mm flanged nylon locking (aluminum, blue-anodized) (4)
  • 5147X: Nuts, 5mm flanged nylon locking (steel, serrated) (8)
  • 4955: Pins, axle (2.5x12mm) (4)
  • 5666: Sidewall protector, beadlock style (blue) (2)/ 2.5x8mm CS (24) (for use with Geode wheels)
  • 5664: Sidewall protector, beadlock style (green) (2)/ 2.5x8mm CS (24) (for use with Geode wheels)
  • 5667: Sidewall protector, beadlock style (red) (2)/ 2.5x8mm CS (24) (for use with Geode wheels)
  • 5665: Sidewall protector, beadlock style (yellow) (2)/ 2.5x8mm CS (24) (for use with Geode wheels)
  • 5374X: Tires & wheels, assembled, glued (Gemini black chrome wheels, Talon tires, foam inserts) (2) (use with 17mm splined wheel hubs & nuts, part #5353X) (TSM rated)
  • 5374: Tires & wheels, assembled, glued (Gemini chrome wheels, Talon tires, foam inserts) (2) (fits Maxx/Revo series)
  • 5674: Tires & wheels, assembled, glued (Geode chrome wheels, Maxx® tires (6.3" outer diameter), foam inserts) (2) (use with 17mm splined wheel hubs & nuts, part #5353X & beadlock-style sidewall protectors, part #5665, 5666, 5667)
  • 5672: Tires & wheels, assembled, glued (Geode chrome wheels, paddle tires, foam inserts) (2) (use with 17mm splined wheel hubs & nuts, part # 5353X) (TSM rated)
  • 4973R: Tires & wheels, assembled, glued (Hurricane chrome wheels, Maxx® tires (6.3" outer diameter), foam inserts) (2) (fits Revo®/T-Maxx®/E-Maxx with 6mm axle and 14mm hex)
  • 5174A: Tires & wheels, assembled, glued (Split-Spoke satin-finish wheels, Talon tires, foam inserts) (2) (fits Revo®/T-Maxx®/E-Maxx with 6mm axle and 14mm hex)
  • 4983A: Tires & wheels, assembled, glued (SS (Split Spoke) black chrome wheels, Maxx® tires (6.3" outer diameter), foam inserts) (2) (use with 17mm splined wheel hubs & nuts, part #5353X) (fits Revo®/T-Maxx®/E-Maxx) (TSM rated)
  • 5174: Tires & wheels, assembled, glued (SS (Split Spoke) chrome wheels, Talon tires, foam inserts) (2) (fits Revo®/T-Maxx®/E-Maxx with 6mm axle and 14mm hex)

Transmission Components

  • 4611: Ball bearings (5x11x4mm) (2)
  • 5119: Ball bearings, blue rubber sealed (10x15x4mm) (2)
  • 5116: Ball bearings, blue rubber sealed (5x11x4mm) (2)
  • 5117: Ball bearings, blue rubber sealed (6x12x4mm) (2)
  • 5394X: Forward only conversion kit (eliminates reverse)
  • 5394: Forward only shaft, steel (Revo®)
  • 5383: Gear set, 2-speed close ratio (2nd speed gear 40T, 13T-16T input gears, hardware)
  • 5385: Gear set, 2-speed standard ratio (2nd speed gear 39T, 13T-17T input gears, hardware)
  • 5384: Gear set, 2-speed wide ratio (2nd speed gear 38T, 13T-18T input gears, hardware)
  • 5386: Gear, 1st speed, 43T
  • 5181: Gearbox halves (front & rear)/ rubber access plug/ shift detent ball/ spring/ 4mm GS/ shift shaft seal, glued
  • 5366: Input shaft, transmission (slipper shaft)
  • 5390: Primary clutch assembly/2x9.8mm pin/6x8x0.5 TW (1)
  • 5393: Primary shaft/ 1st speed hub/ one-way bearing/ snap ring/ 5x8mm TW
  • 5352R: Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))
  • 5352X: Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))
  • 4995X: Reverse installation kit (includes all components to add mechanical reverse (no Optidrive®) to T-Maxx® 3.3) (includes 2060 sub-micro servo)

Traxxas Tools

  • 3433X: Body reamer (aluminum handle)
  • 3433: Body reamer (plastic handle)
  • 3436: Cap, body reamer
  • 3432: Scissors, curved tip
  • 3431: Scissors, straight tip
  • 8712: Speed Bit Essentials Set, hex and nut driver, 7-piece, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm) and nut drivers (5.0mm, 5.5mm, 7.0mm, and 8.0mm), 1/4" drive
  • 8722: Speed bit handle, premium, medium (rubber overmold)
  • 8710: Speed Bit Master Set, hex and nut driver, 13-piece, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm, 3.0mm), (ball-end: 2.0mm, 2.5mm, 3.0mm), and nut drivers (4.00mm, 4.50mm, 5.00mm, 5.50mm, 7.00mm, 8.00mm),
  • 8711: Speed Bit Master Set, hex driver, 7-piece straight and ball end, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm, 3.0mm) (ball end: 2.0mm, 2.5mm, 3.0mm), 1/4" drive
  • 8719: Speed Bit Master Set, nut driver, 6-piece, includes premium handle (medium), travel pouch, and nut drivers (4.0mm, 4.5mm, 5.0mm, 5.5mm, 7.0mm, 8.0mm), 1/4" drive
  • 8716: Speed Bit Set, hex driver, 2-piece ball-end (2.0mm, 2.5mm), 1/4" drive
  • 8716X: Speed Bit Set, hex driver, 3-piece ball-end (2.0mm, 2.5mm, 3.0mm), 1/4" drive
  • 8715: Speed Bit Set, hex driver, 3-piece straight (1.5mm, 2.0mm, 2.5mm), 1/4" drive
  • 8715X: Speed Bit Set, hex driver, 4-piece straight (1.5mm, 2.0mm, 2.5mm, 3.0mm), 1/4" drive
  • 3415: Tool set with pouch (includes 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4mm drivers/4mm, 5mm, 5.5mm, 7mm and 8mm nut drivers/ 2mm, 4mm, and 5mm slotted screwdrivers/ #00 Phillips, #0 Phillips, and #1 Phillips screwdrivers/4mm and 8mm wrench/ driver handle

Turnbuckles & Threaded Rods

  • 4944: Bellcrank posts, aluminum (2)/ steering link threaded rod (3x25mm)/ long rod ends (2)
  • 5355: Hollow ball, tall centered (2)/ tall offset hollow ball (2)/ bump steer adjustment shims; 3.5mm (2), 1.17mm (2)
  • 5347: Rod ends, Revo® (large) with hollow balls (12)
  • 2742X: Rod ends, short (6)/ hollow balls (6)
  • 5141A: Toe links, T-Maxx®/E-Maxx (TUBES black-anodized, 7075-T6 aluminum, stronger than titanium) (112mm, front) (2)/ rod ends (4)/ aluminum wrench (1) (For T-Maxx®/E-Maxx models w/sealed pivot ball suspension & 3.8' wheels)
  • 5143A: Toe links, T-Maxx®/E-Maxx (TUBES black-anodized, 7075-T6 aluminum, stronger than titanium) (124mm, rear) (2)/ rod ends (4)/ aluminum wrench (1) (For T-Maxx®/E-Maxx models w/sealed pivot ball suspension & 3.8' wheels)
  • 5141R: Toe links, T-Maxx®/E-Maxx (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (112mm, front) (2)/ rod ends (4)/ aluminum wrench (1) (For T-Maxx®/E-Maxx models w/sealed pivot ball suspension & 3.8" wheels)
  • 5143R: Toe links, T-Maxx®/E-Maxx (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (124mm, rear) (2)/ rod ends (4)/ aluminum wrench (1) (For T-Maxx®/E-Maxx models w/sealed pivot ball suspension & 3.8" wheels)
  • 5141: Turnbuckles, toe links (5.0mm steel) (front) (2)
  • 5143: Turnbuckles, toe links (5.0mm steel) (rear) (2)

Two-Speed Components

  • 5119: Ball bearings, blue rubber sealed (10x15x4mm) (2)
  • 5116: Ball bearings, blue rubber sealed (5x11x4mm) (2)
  • 5117: Ball bearings, blue rubber sealed (6x12x4mm) (2)
  • 5394X: Forward only conversion kit (eliminates reverse)
  • 5383: Gear set, 2-speed close ratio (2nd speed gear 40T, 13T-16T input gears, hardware)
  • 5385: Gear set, 2-speed standard ratio (2nd speed gear 39T, 13T-17T input gears, hardware)
  • 5384: Gear set, 2-speed wide ratio (2nd speed gear 38T, 13T-18T input gears, hardware)
  • 5386: Gear, 1st speed, 43T
  • 5390: Primary clutch assembly/2x9.8mm pin/6x8x0.5 TW (1)
  • 5393: Primary shaft/ 1st speed hub/ one-way bearing/ snap ring/ 5x8mm TW

PDF preview unavailable. Download the PDF instead.

49077-3 parts Dustin Hite Adobe PDF Library 21.7.127

Related Documents

Preview Traxxas E-Maxx Brushless (Model 39086-4) Parts List
Comprehensive parts list for the Traxxas E-Maxx Brushless RC car, model 39086-4, detailing all official part numbers and descriptions for upgrades and replacements.
Preview Traxxas Stampede (Model 36054-1) Parts List and Specifications
Comprehensive parts list for the Traxxas Stampede (Model 36054-1) RC monster truck, detailing all available components for chassis, drivetrain, electronics, suspension, and accessories.
Preview Traxxas Slash Brushless 58334-4 Parts List: Official Component Guide
Discover the official parts list for the Traxxas Slash Brushless RC car, model 58334-4. This guide details all components, from chassis and suspension to electronics and accessories, essential for maintenance and upgrades.
Preview Traxxas Chevrolet Corvette Stingray (Model 93054-4) Parts List
Comprehensive parts list for the Traxxas Chevrolet Corvette Stingray (Model 93054-4) RC car, detailing components for various categories like suspension, electronics, and body.
Preview Traxxas Factory Five '33 Hot Rod Coupe Parts List
Comprehensive parts list for the Traxxas Factory Five '33 Hot Rod Coupe (Model 93044-4), detailing all available components for this RC car model.
Preview Traxxas Mini Slash 4x4 Parts List (Model 108164-1)
Comprehensive parts list for the Traxxas Mini Slash 4x4 RC car (Model 108164-1), detailing components for suspension, driveline, shocks, electronics, radio system, tires, wheels, and accessories. Includes part numbers and descriptions.
Preview Traxxas Stampede 4X4 Brushless Parts List (Model 67154-4)
Comprehensive parts list for the Traxxas Stampede 4X4 Brushless RC car, model 67154-4, including part numbers, descriptions, and categories for easy identification and ordering of replacement and upgrade components.
Preview Traxxas TRX-4 Sport High Trail Edition (Model 82044-4) Parts List
Detailed parts catalog for the Traxxas TRX-4 Sport High Trail Edition (Model 82044-4), including components for axles, bodies, chassis, electronics, suspension, and tools. Essential for RC enthusiasts and maintenance.