LOREX

What's Included

• 4K Wired NVR
• Ethernet Cable
• USB Mouse
• HDMI Cable
• Power Adapter
• 6-Pin Cable Adapter (x2)

Overview - Front Panel

1. Power, Hard Drive & Network Statuses: Indicates the status of the power, hard drive, and network connections.

2. Channel Statuses: Displays the status of connected camera channels.

3. Navigation Controls: Used for navigating menus and settings.

4. Power Button: Turns the device on or off.

5. Playback Controls: Controls for reviewing recorded footage.

6. Switch Keyboards (shift): Functionality related to keyboard input.

7. Start/Stop Recording (rec): Button to start or stop recording.

8. Special Functions (fn): Accesses additional functions.

9. Back/Cancel (esc): Returns to the previous screen or cancels an action.

10. Info Button: Displays information about the device or current status.

11. USB Port: For connecting USB devices like mice or flash drives.

Overview - Back Panel

1. Power Connection: Connect the power adapter here.

2. Power Switch: Main power switch for the device.

3. Camera Connection (PoE): Connect PoE-enabled cameras.

4. RS485 Alarm: For connecting alarm devices.

5. Monitor Connection (VGA): Connect a VGA monitor.

6. RS232: Serial port for specific connections.

7. Audio In/Out: Connect audio devices.

8. Monitor Connection (HDMI): Connect an HDMI monitor.

9. USB Port: Additional USB port for devices.

10. Network Connection (LAN): Connect to your network via Ethernet.

Connect Your Wired Camera

Connect your camera directly to your recorder using the camera's Ethernet extension cable.

*May be sold separately.

Setting Up Your Recorder

1. Step 1: Connect to Wi-Fi Router

   Connect your recorder to your Wi-Fi router using the included Ethernet cable.

2. Step 2: Connect Peripherals

   Connect the included USB mouse to the USB port on your recorder. To copy events or to perform a firmware update, connect a USB flash drive.

3. Step 3: Connect to TV

   Connect your recorder to your TV using the included HDMI cable. The HDMI supports up to 4K resolution and VGA supports up to 1080p.

4. Step 4: Power On

   Connect the included power cord to your recorder and a power outlet. Then flip the power switch ON and complete the Lorex Setup Wizard.

App Setup

Requirements for Remote Viewing

• Have high-speed Internet
• Have an upload speed of 6 Mbps for one 4K channel and at least 20 Mbps for the whole system
• Locate your recorder's Device ID QR code (Text: "Device ID: XXXXXXXXXXX")

Connecting to the Lorex Pro App

1. Step 1: Download the App

   Download the Lorex Pro app. [Lorex Pro App QR Code]

2. Step 2: Connect

   Tap '+' to connect. [Add Button]

Need Help?

For related support, scan the QR code or visit: help.lorex.com/N884 [Lorex Support QR Code]

Register Your Product

Please see our full Terms of Service and Limited Hardware Warranty Policy at: lorex.com/warranty