Chapter 1. Safety Instructions
Always follow these safety instructions when setting up and using the VS-PTC-200 Camera Controller:
- Use attachments only as recommended.
- Use the type of power source indicated on the Camera Controller. If you are not sure of the type of power available, consult your distributor or local electricity company for advice.
- Always take the following precautions when handling the plug. Failure to do so may result in sparks or fire:
- Ensure the plug is free of dust before inserting it into a socket.
- Ensure that the plug is inserted into the socket securely.
- Do not overload wall sockets, extensions leads or multi-way plug boards as this may cause fire or electric shock.
- Do not place the Camera Controller where the cord can be stepped on as this may result in fraying or damage to the lead or the plug.
- Never allow liquid of any kind to spill into the Camera Controller.
- Except as specifically instructed in this User Manual, do not attempt to operate this product by yourself. Opening or removing covers may expose you to dangerous voltages and other hazards. Refer all servicing to licensed service personnel.
- Unplug the VS-PTC-200 during thunderstorms or if it is not going to be used for an extended period. Do not place the Camera Controller or remote control on top of vibrating equipment or heated objects such as a car, etc.
- Unplug the VS-PTC-200 from the wall outlet and refer servicing to licensed service personnel when the following situations happen:
- If the power cable or plug becomes damaged or frayed.
- If the Camera Controller is wet with liquid, rain or water.
Note: Using an incorrect battery type in the remote control may result in breakdown. Follow local instructions on how to dispose of used batteries.
Precautions
Warning: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
If Camera Controller will not be used for an extended time, unplug it from the power socket.
⚡ Risk of Electric Shock
? DO NOT OPEN
Caution: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to licensed service personnel.
⚡ This symbol indicates that this equipment may contain dangerous voltage which could cause electric shock.
? This symbol indicates that there are important operating and maintenance instructions in this User Manual with this unit.
FCC Warning
This VS-PTC-200 Camera Controller has been tested and found to comply with the limits for a Class A digital device, pursuant to Article 15-J of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled "Digital Apparatus," ICES-003 of Industry Canada. Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux appareils numeriques de Classe A prescrites dans la norme sur le material brouilleur: "Appareils Numeriques," NMB-003 edictee par l'Industrie.
EN55022 (CE Radiation) Warning
This product is intended for use in a commercial, industrial, or educational environment. It is not intended for residential use.
This is a Class A product. In a residential environment it may cause radio interference, in which case the user may be required to take adequate measures. The typical use is in a conference room, reception room or hall.
Chapter 2. About The Product
2.1 Introduction
The VS-PTC-200 Compact Camera Controller is a full-function system keyboard. With features of ergonomic design, multi-function, high reliability and easy operation, it is a perfect controller for rugged PTZ cameras, video conference cameras, surveillance cameras and so on.
2.2 Features
- 4D joystick for pan/tilt/zoom/focus control, ergonomic design and excellent finishing;
- High brightness OLED display;
- Auto backlight keys;
- Multi-level protection from illegal operation or setting;
- Multi-baud rate and protocols;
- 7address;
- Batch program cameras in the systems;
- Compact design with portable features;
2.3 Technical Data
| Comm. Interface | RS-232 /RS422 |
|---|---|
| Protocol | VISCA/PELCO-D |
| Baud Rate | 9600bps, 38400bps |
| Address | 1~255 |
| Joystick | 4-axis (Left/Right, Up/Down, Zoom In/Zoom Out, Focus Near / Focus Far) |
| Display | OLED |
| Power | DC12V |
| Power Consumption | <2W |
| Working Temperature | 0℃~+40℃ |
| Storage Temperature | -20℃~+60℃ |
| Relative Humidity | ≤90% (non-condensation) |
| Dimensions | 200mm(L)*120mm(W)*103mm(H) |
| Net Weight | 0.5kg |
2.4 Parts and view
- 1 (Numbers)
- Input numbers.
- 2 CALL (Call preset)
- Input preset number, then press CALL key to call a preset.
- 3 CAMERA (Switch cameras)
- Input camera number, then press CAMERA key to switch to another camera.
- 4 SET (Set / Clear preset)
- Input preset number, then press SET key to set or delete a preset (Short press to "set"; long press to "clear").
- 5 SETUP (Enter setup menu)
- Press SETUP key to enter menu and program the keyboard.
- 6 MIRROR (flip the image)
- Press MIRROR key to control the image flip of the camera.
- 7 BACK LIGHT (Turn on/off Camera back light compensation)
- Press BACK LIGHT key to turn on / off the back light compensation.
- 8 FREEZE (Freeze the screen)
- Press FREEZE key to control the image freeze of the camera.
- 9 LOCK (keyboard lock)
- Press LOCK key to lock the control keyboard and key in the user password to unlock the keyboard.
- 10 POWER (Power switch)
- Press POWER key to turn on / off the camera.
- 11 ESC (Exit / Delete)
- It is a key to EXIT in a menu or DELETE in other operations.
- 12 ENT (Confirm)
- It is used to confirm menu setting.
- 13 BRT-
- Turn down the brightness.
- 14 Joystick
- This joystick is used to Pan, Tilt, Zoom and Focus.
Non-Menu State: Left/Right/Up/Down: Pan/Tilt the camera correspondingly. Twist clockwise: Zoom In, Twist anti-clockwise: Zoom Out; Press Zoom/ Focus Switch Key and Twist: Focus Near/Far.
Menu State: Right: Enter a submenu or Confirm; Left: Return to previous menu or exit (expect some not returnable menus); Up: Move to last option; Down: Move to next option.
- 15 BRT+
- Press BRT+ key to turn up the image brightness.
- 16 Zoom / Focus Switch Key
- This key is used to switch between zoom and focus function. Operation: Press this key, the crisscross of indicator lighter near the joystick will go out, twist the joystick to zoom in / out; press this key again, the crisscross of indicator lighter will be lightened, twist the joystick will adjust focus value.
- 17 MENU (Enter Camera Menu)
- This key is used to enter camera menu.
2.5 Connections
2.5.1 Connections
The diagram shows the VS-PTC-200 connected to cameras and displays via RS-422 and RS232 IN interfaces. A DC12V power supply is connected to the VS-PTC-200.
2.5.2 RS-422 Pins instructions
| Pin No. | function |
|---|---|
| 1 | GND |
| 2 | RXD IN- |
| 3 | RXD IN+ |
| 4 | TXD IN- |
| 5 | TXD IN+ |
2.5.3 RS232 Pins instructions
| Pin No. | function |
|---|---|
| 1 | NA |
| 2 | NA |
| 3 | TXD |
| 4 | GND |
| 5 | RXD |
| 6 | NA |
| 7 | NA |
| 8 | NA |
Marshall Electronics, Inc.
1910 East Maple Ave. El Segundo, CA 90245
Tel: (800) 800-6608 • (310) 333-0606
Fax: 310-333-0688
Warranty
Marshall Electronics warranties to the first consumer that this device will, under normal use, be free from defects in workmanship and materials, when received in its original container, for a period of three years from the purchase date. This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above. Therefore, labor and parts may be charged to the consumer. This warranty does not apply to the product exterior or cosmetics. Misuse, abnormal handling, alterations or modifications in design or construction void this warranty. No sales personnel of the seller or any other person is authorized to make any warranties other than those described above, or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period described above.
Due to constant effort to improve products and product features, specifications may change without notice.
Marshall
20608 Madrona Avenue, Torrance, CA 90503
Tel: (800) 800-6608 / (310) 333-0606 • Fax: 310-333-0688
Marshall Electronics - Professional Broadcast Miniature/Compact/Indoor 4K/UHD/HD Cameras, 4K Rack Mount/Desktop Monitors, Hardware, and Accessories.
Marshall Electronics - Professional Broadcast Miniature/Compact/Indoor 4K/UHD/HD Cameras, 4K Rack Mount/Desktop Monitors, Hardware, and Accessories.
