User Manual for CYPIII models including: PU-USB2-KIT, USB 2.0 Transmitter, 2.0 Receiver Kit, Reciver Kit with Transmitter, Transmitter with Reciver
DISCLAIMERS. The information in this manual has been carefully checked and is believed to be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of patents or other rights of...
PU-USB2-KIT USB 2.0 Transmitter/Receiver Kit – TDIGroup
PU-USB2-KIT USB 2.0 Transmitter/Receiver kit OPERATION MANUAL DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be contained in this document. CYP (UK) Ltd also makes no commitment to update or to keep current the information contained in this document. CYP (UK) Ltd reserves the right to make improvements to this document and/or product at any time and without notice. COPYRIGHT NOTICE No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer file, in any form or by any means--electronic, mechanical, magnetic, optical, chemical, manual, or otherwise--without express written permission and consent from CYP (UK) Ltd. © Copyright 2020 by CYP (UK) Ltd. All Rights Reserved. Version 1.1 TRADEMARK ACKNOWLEDGMENTS All products or service names mentioned in this document may be trademarks of the companies with which they are associated. SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: · Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. · To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. · Never spill liquid of any kind on or into this product. · Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit. · Do not attach the power supply cabling to building surfaces. · Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged. · Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it. · To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for sufficient space for air to circulate around the unit. · Please completely disconnect the power when the unit is not in use to avoid wasting electricity. VERSION HISTORY REV. DATE v1.00 08/02/2021 SUMMARY OF CHANGE Preliminary release (RDV1) CONTENTS 1. Introduction ..................................................1 2. Applications ..................................................1 3. Package Contents .........................................1 4. System Requirements ..................................1 5. Features.........................................................2 6. Operation Controls and Functions ..............3 6.1 Transmitter's Front & Rear Panel.....................3 6.2 Receiver's Front & Rear Panel ..........................4 7. Connection Diagram ....................................5 8. Specifications................................................6 8.1 Technical Specifications ....................................6 8.2 Cable Specifications ...........................................8 9. Acronyms.......................................................9 1. INTRODUCTION This compact and low cost USB 2.0 Extender set is designed to expand the usability and flexibility of the most prevalent interface standard used nowadays, USB. This extender provides a simple and efficient way to extend the USB 2.0 connection from a typical host, such as a PC or laptop, to up to 4 standard USB devices located as far as 50 metres away. It extends the high quality data stream over single Cat.5e (or better) cable, with full support for the entire range of USB 2.0 compliant products and data formats. The receiver can supply up to 2A of total power (500mA per port) to devices connected to the 4 USB Type-A ports. 2. APPLICATIONS Remote USB extension Security and monitoring Industrial Control Conference room and boardroom KVM Extension 3. PACKAGE CONTENTS 1× USB 2.0 Extender Transmitter 1× USB 2.0 Extender Receiver 1× 5V/3A DC Power Adapter 1× Operation Manual 4. SYSTEM REQUIREMENTS The use of industry standard Cat.6, Cat.6A or Cat.7 cable is highly recommended. 1 5. FEATURES Convenient point-to-point USB 2.0 extension with 4 port hub 1 host port on the transmitter and 4 device ports on the receiver Supports standard USB 2.0 devices, such as a mouse and keyboard, as well as those requiring isochronous transfers such as webcams and portable storage Supplies up to 2A of power to the 4 USB ports (500mA per port) Low RF emission and robust noise immunity Simple plug-and-play operation, no drivers required 2 6. OPERATION CONTROLS AND FUNCTIONS 6.1 Transmitter's Front & Rear Panel Front PU-USB2-TX Rear USB CAT5e/6A/7 OUT 1 2 1 USB Port: Connect directly to a USB host such as a PC or laptop to extend their USB functionality to devices connected to the USB ports on the currently connected receiver. 2 CAT 5e/6A/7 OUT Port: Connect to a compatible receiver with a single cable for transmission and reception of all data signals. Note: This unit is directly powered by the connected receiver. 3 6.2 Receiver's Front & Rear Panel Front PU-USB2-RX Rear USB 2.0 DC 5V CAT5e/6A/7 IN 1 2 3 1 USB 2.0 Ports: Connect directly to standard USB devices such as a mouse, keyboard or flash drive to extend their USB functionality to the host currently connected to the transmitter's USB port. Note: Each port can provide up to 500mA power. 2 DC 5V Port: Plug the 5V DC power adapter into this port and connect it to an AC wall outlet for power. 3 CAT 5e/6A/7 IN Port: Connect to a compatible transmitter with a single cable for transmission and reception of all data signals. Note: Power is also provided to the connected transmitter. 4 7. CONNECTION DIAGRAM PC/Laptop USB Input PU-USB2-TX USB TX CAT5e/6A/7 OUT Power Supply LAN Cable DC 5V CAT5e/6A/7 IN RX PU-USB2-RX USB 2.0 USB Output USB Devices USB Storage Webcam 5 8. SPECIFICATIONS 8.1 Technical Specifications Transmitter USB 2.0 Bandwidth 480Mbps Bi-directional Port 1×USB 2.0 (Type-B) Output Port 1×Cat.5e/6/7 (RJ-45) Power Supply Provided via Cat.5e/6/7 ESD Protection (HBM) ±8kV (Air Discharge) ±4kV (Contact Discharge) Dimensions (W×H×D) 50mm×25mm×52mm [Case Only] Weight 60g Chassis Material Metal (Steel) Chassis Color Black Operating Temperature 0°C 40°C/32°F 104°F Storage Temperature -20°C 60°C/-4°F 140°F Relative Humidity 20 90% RH (Non-condensing) Power Consumption 10W 6 Receiver USB 2.0 Bandwidth 480Mbps Bi-directional Ports 4×USB 2.0 (Type-A) Input Port 1×Cat.5e/6/7 (RJ-45) Power Supply 5V/3A DC (US/EU standards, CE/FCC/UL certified) ESD Protection (HBM) ±8kV (Air Discharge) ±4kV (Contact Discharge) Dimensions (W×H×D) 50mm×25mm×72mm [Case Only] 50mm×25mm×72mm [All Inclusive] Weight 87g Chassis Material Metal (Steel) Chassis Colour Black Operating Temperature 0°C 40°C/32°F 104°F Storage Temperature -20°C 60°C/-4°F 140°F Relative Humidity 20 90% RH (Non-condensing) Power Consumption 10W (Unloaded), 13.5W (Maximum) 7 8.2 Cable Specifications Cable Length Ethernet Cable Cat.5e/6 Cat.6A/7 USB 2.0 480Mbps 50m 50m 8 9. ACRONYMS ACRONYM Cat.5e Cat.6 Cat.6A Cat.7 Mbps PD PSE UAC USB UVC COMPLETE TERM Enhanced Category 5 cable Category 6 cable Augmented Category 6 cable Category 7 cable Megabits per second Powered Device Power Sourcing Equipment USB Audio Class Universal Serial Bus USB Video Class 9 CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton, Middlesex, TW17 8BA Tel: +44 (0) 20 3137 9180 | Fax: +44 (0) 20 3137 6279 Email: sales@cypeurope.com www.cypeurope.com v1.00Adobe PDF Library 15.0 Adobe InDesign 16.1 (Macintosh)