Anvil 4 cu ft Poly Tray Wheelbarrow
Use and Care Guide
Item #: 1006456591
Model #: 4CUwheelbarrow
Thank you for purchasing the Anvil 4 cu ft Poly Tray Wheelbarrow. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Anvil!
Table of Contents
Safety Information
Before using this product, please read, understand, and follow all instructions.
- Do not exceed the total maximum load capacity of 250 lb (120 kg). The rated weight is based on a uniformly distributed load.
- Do not allow children to use the wheelbarrow without supervision.
- Do not use this wheelbarrow to transport passengers.
- This wheelbarrow is not suitable for use on highways or high-speed use.
- Distribute the load evenly on the surface of the tray.
- Do not place items on the top edge of the tray.
- If any parts are damaged, cracked, or misplaced, please do not use the cart before replacing the parts.
- Do not use the wheelbarrow on a surface that will damage the tires.
- It is recommended to check each usage of the wheelbarrow.
- Keep this manual for future reference.
Pre-Installation
Planning Installation
Read and follow all safety rules and operating instructions before using this product.
Tools Required (Not included)
- Slotted screwdriver ?
- Wrench ?
Hardware Included
NOTE: Hardware not shown to actual size.
| Part | Description | Quantity |
|---|---|---|
| AA | M8x130 mm bolt, washer, and nut | 2 |
| BB | M8x70 mm bolt, washer, and nut | 2 |
| CC | M8x58 mm bolt, washer, and nut | 4 |
| DD | M8x48 mm bolt, washer, and nut | 2 |
| EE | M8x23 mm bolt, washer, and nut | 2 |
Package Contents
| Part | Description | Quantity |
|---|---|---|
| A | Tray | 1 |
| B | Handle | 2 |
| C | Leg | 2 |
| D | Leg brace | 1 |
| E | Wedge | 2 |
| F | Nose guard | 1 |
| G | Wheel | 1 |
| H | Axle bracket | 2 |
| I | Axle | 1 |
Assembly
Step 1: Attaching Wedges to Tray
Push bolts (AA & BB) through the bottom of tray (A) and through wedge (E). Repeat for the second wedge.
[Diagram showing bolts AA & BB being attached to tray A and wedge E]
Step 2: Placing Handles on Wedges
Turn tray (A) over so it is at an angle of 45 degrees to the ground. Place handles (B) over bolts and lower onto wedges (E).
[Diagram showing handles B being placed on bolts and lowered onto wedges E with tray A at an angle]
Step 3: Attaching the Legs
Make sure the holes in leg (C) are facing the back of the tray. Place leg over bolts (AA & BB) and loosely attach to the handle with washers and nuts. Repeat for the other leg.
[Diagram showing legs C being attached to the tray and handles with bolts AA & BB]
Step 4: Attaching the Leg Brace
Place leg brace (D) across the back of leg (C) and loosely attach using bolts, washers, and nuts (EE). Repeat to attach the other end of the leg brace to the other leg.
[Diagram showing leg brace D being attached to leg C with bolts EE]
Step 5: Installing the Nose Guard
Use bolts, washers, and nuts (DD) to attach nose guard (F) to the front of handles (B).
[Diagram showing nose guard F being attached to handles B with bolts DD]
Step 6: Attaching the Axle Bracket
Loosely attach axle bracket (H) to the bottom of the handle using two bolts, washers, and nuts (CC).
[Diagram showing axle bracket H being attached to the handle with bolts CC]
Step 7: Attaching the Axle and Wheel
Slide axle (I) through wheel (G) and then into the attached axle bracket (H). Slide the second axle bracket (H) over the other end of the axle. Loosely attach the second axle bracket to the handle using bolts, washers, and nuts (CC). Fully tighten all nuts.
[Diagram showing axle I, wheel G, and axle brackets H being assembled and attached with bolts CC]
Questions, problems, missing parts? Before returning to the store, call Anvil Customer Service:
8 a.m. – 7 p.m., EST, Monday-Friday
9 a.m. – 6 p.m., EST, Saturday
1-877-527-0313
Retain this manual for future use.
