JAMARA 1:24 Scale Agricultural and Construction Toy Models

Product Overview

This document provides information and instructions for various 1:24 scale agricultural and construction toy models from JAMARA. These models are designed for play and educational purposes.

Available Models Include:

• No. 423250: Front loader with crocodile bucket 1:24S incl. small round bale
• No. 423251: Front loader with fork 1:24S incl. hay bale
• No. 423252: Front loader with bale grabber 1:24S incl. large round bale
• No. 423253: Spreader 1:24S incl. play grain
• No. 423254: Reversible plow 1:24S
• No. 423255: Tipper 1:24S green
• No. 423256: Logging trailer with crane arm 1:24S
• No. 423257: Feed mixer 1:24S
• No. 423258: Conveyor belt 1:24S incl. hay bale
• No. 423264: Tipper 1:24S red

JAMARA e.K. is not liable for any damage caused to the product itself or by it, if this is due to improper operation or handling errors. The customer alone bears full responsibility for the proper use and handling, including assembly, usage, and selection of the area of use. Please refer to the operating and user instructions for important information and warnings.

Safety Information

Age Recommendation: Suitable for children aged 3 years and above.

Warning: Not suitable for children under 36 months. RISK OF SUFFOCATION! Contains small parts which can be swallowed. Keep away from small children.

This device is not intended for use by individuals (including children) with reduced physical, sensory, or mental abilities, or lack of experience and/or knowledge, unless they are supervised by a responsible person regarding the device's use.

General Safety Measures:

• Keep hands away from moving parts.
• Use only under the direct supervision of an adult.
• Do not expose the model to direct sunlight or heat.
• Clean the model using a damp cloth.

Assembly and Operation

Front Loader Assembly (for tractor No. 405330):

Push the rear pins (a) into the front of the tractor and fold the front loader down until the front pin (b) engages in the tractor. All attachments can be adjusted or moved manually.

Attachment Assembly:

Push the rear attachment onto the hitch of the tractor until it is firmly seated. Adjust the trailer coupling by turning it to the correct height. All attachments can be adjusted or moved manually.

Detailed operation instructions for specific models are provided visually in the original document.

Compliance Information

JAMARA e.K. declares that the products comply with Directive 2009/48/EC.

The full text of the EU Declaration of Conformity is available at: www.jamara-shop.com/Konformitaet

Service and Contact

For service and dealer information, please refer to the contact details provided in the original document. The main contact for JAMARA e.K. is located in Aichstetten, Germany.

Website: www.jamara.com