ℹ️ Document Conversion Notice:
This document has been converted from PDF and formatted to fit this screen. Diagrams and images may be available only in the original here.
The CoreLine Recessed Spot gen2 fulfills the CoreLine promise of innovative, user-friendly, and high-quality luminaires. Its modular design allows for a "configure to fit" option that better suits specific needs. The range offers a wide choice of light colors (CCT), light output, color finish, frame types, and connection options. The compact and lightweight design of the CoreLine Recessed Spot gen2, always equipped with a push-in connector that allows for wiring in/looping and supports a wide range of wire diameters/cross-sections, makes installation effortless. The high light quality, numerous connection options, long luminaire lifetime, and high system efficiency make the CoreLine Recessed Spot gen2 an ideal accent lighting solution for indoor spots.
Warnings and Safety
The luminaire must be installed and dismantled by a qualified electrician and wired according to the latest regulations for electrical installations (IEE) or according to national requirements, as per the product's mounting instructions.
Product Data
General Information
Attribute
Value
Light source replaceable
Yes
Number of VSA's
1 unit
Driver/VSA included
Yes
Lamp type
LED
Light Technical Data
Attribute
Value
Luminous flux
800 lm
Saturated Red (R9)
<50
Correlated color temperature (nom.)
4000 K
Luminous efficacy (rated) (nom.)
110 lm/W
Color rendering index (CRI)
>80
Light source beam angle
120 degrees
Light color
840 neutral white
Optic type
Wide beam
Beam angle (luminaire)
36°
Unified Glare Rating (UGR)
30
Markings and Classifications
Attribute
Value
Glow wire test
Temperature 650 °C, duration 30 s
Flammability marking
For mounting on normal combustible surfaces
CE marking
Yes
ENEC marking
ENEC marking
Photobiological risk
Photobiological risk group
Specification for photobiological risk
0.2 m (@200mm to EN62778)
Conformity to EU RoHS directive
Yes
Initial Performance (IEC Compliant)
Attribute
Value
Performance at ambient temperature Tq
25 °C
Flicker factor (PstLM)
1
Stroboscopic visibility measure (SVM)
0.4
Ambient temperature range
0 to +35 °C
Lumen output tolerance
+/- 10%
Initial color quality
(0.38, 0.38) SDCM <5
Tolerances for energy consumption
+/- 10%
Standard deviation of color combination (McAdam ellipse)
SDCM ≤ 5
Performance Over Time (IEC Compliant)
Attribute
Value
Lumen maintenance (EN-IEC 62722-2-1) at median useful life* of 50,000 hours
L70
Lumen maintenance (EN-IEC 62722-2-1) at median useful life* of 75,000 hours
-
Lumen maintenance (EN-IEC 62722-2-1) at median useful life* of 100,000 hours
-
Electrical and Electrical Data
Attribute
Value
Input voltage
220 to 240 V
Input frequency
50 or 60 Hz
Initial CLO power consumption
- W
Average CLO power consumption
- W
Inrush current
2 A
Switch-on delay peak current
0.02 ms
Power consumption
7.2 W
Power factor
0.9
Connection
Insteekconnector, 3-polig
Cable
0.25 m cable with 3-pole connector
Number of products on MCB of 16 A type B
40
Suitable for random switching
No
IEC protection class
Class II
Total harmonic distortion
45%
Dimming and Control Systems
Attribute
Value
Dimmable
Yes
Driver/power supply/transformer
External power supply, dimmable
Light control
Phase-cut dimmer
Constant light output
No
Maximum dimming level
10% (depending on the dimmer, ELV)
Enclosure Material and Dimensions
Attribute
Value
Housing material
Die-cast aluminium
Reflector material
Polycarbonate
Optic material
Full EOC
Optical cover/lens material
Polycarbonate
Fixation material
Steel
Housing color
Aluminium
Optical cover/lens finish
-
Total height
62 mm
Total diameter
85 mm
Protection class
IP20/65 [Protection against fingers, protection against dust ingress, jet-proof]
IK classification
IK03 [0.3 J]
Product Specifics
Attribute
Value
Product name for ordering
RS155B LED6-WB-/840 D68 PSR PI6 ALU
Full product name
RS155B LED6-WB-/840 D68 PSR PI6 ALU
Material nr. (12NC)
871951494168799
Numerator - Quantity per pack
1
EAN/UPC - product/packaging
8719514941687
Numerator - Boxes per outer box
18
EAN/UPC - Case
8719514941724
Dimensional drawing
The drawing shows a recessed luminaire with a circular cut-out diameter of 68 mm and a total diameter of 85 mm. The height of the luminaire is 62 mm. The driver unit is shown separately with dimensions of 128 mm length and 50 mm width.
Photometric data
The photometric data shows a polar diagram with a wide beam distribution, peaking at 0 degrees. The data is labeled as "Polar Normal (separate) - null - 911401824684".
Philips CoreLine Recessed Spot Gen2 RS156B LED6-WB-/840 D68 PSR PI6 ALU Datasheet Technical datasheet for the Philips CoreLine Recessed Spot Gen2, model RS156B LED6-WB-/840 D68 PSR PI6 ALU. Features include 7.2W, 800lm, 4000K, adjustable, phase-cut dimming, wide beam, aluminum housing, IP20/44 rating, and a 5-year warranty.
Philips CoreLine Recessed Spot gen2 RS156B LED6-WB-/830 D68 PSR PI6 ALU Datasheet Detailed technical specifications and product information for the Philips CoreLine Recessed Spot gen2, model RS156B LED6-WB-/830 D68 PSR PI6 ALU. Features include 7.2W power, 750 lm output, 3000K color temperature, adjustable design, and IP20/44 rating.
Philips CoreLine Recessed Spot gen2: Technical Specifications and Features Detailed information on the Philips CoreLine Recessed Spot gen2, including technical specifications, performance data, dimensions, and safety guidelines. This LED spotlight offers adjustable lighting with a 4000K color temperature and extensive beam.
Philips CoreLine Recessed Spot gen2 RS150B Datasheet Detailed technical specifications and product information for the Philips CoreLine Recessed Spot gen2 RS150B, including performance data, dimensions, and safety information.
