XPower User Manual

Packing Content & Specifications:

• Input: 5V/2A, 9V/2A(max)
• Output: 5V/1A, 9V/1.2A(10W max)
• Folded dimension: H7 x W99 x D99(mm)
• Charger weight: 51g

How To Use:

1. Connect the GY-68 to a 9V power supply and plug the charging cable into the Micro USB port. The LED indicator will flash light for several seconds.
2. Place your device on the GY-68. Your device will be charged automatically.

To use the GY-68, some phones must be attached to a Qi certified case that supports wireless charging. When your device is charging, do not place anything between it and the GY-68 to avoid interference. Be especially cautious that metal objects don't get in the way, as such objects can overheat and, if touched, may cause burn injuries.

Attention & Safety Precautions:

• Please do not vigorously extrude or collide with the product.
• Do not dismantle or put the product into fire or water when it is powered on to avoid short circuit, leakage, or corrosive environments, which could damage the circuitry.
• Avoid placing items like cards, bankcards, etc., on the charging pad, as this may cause damage.
• Do not use the product in severely high temperature or high humidity environments.
• Do not place magnetic strip or chip cards on the charging pad, as this may cause ID magnetic cards to lose efficacy.
• Do not place metal objects (such as coins) on the charging pad while charging to avoid damage from heating.
• Avoid crash, hitting, scraping, throwing, and prevent any damage to the charger.
• Clean the product using a dry cloth only; avoid using any chemical cleaning products.
• The XPower charger features a Smart IC intelligent chip that can auto-detect and maximize compatibility during charging. It also incorporates built-in intelligence to prevent short circuit, overcharge, overheating, and overcurrent. XPower purchases USD200 million in 3rd party product liability insurance. This insurance provides funds for compensation to third parties arising from injury or damage caused by XPower products.
• In hot weather or high temperatures, the XPower charger and the charging device may become warmer than usual during charging. The temperature may be higher when both devices are placed together. It is advisable to place the XPower power bank in an environment with good air circulation and avoid storing it in handbags, under beds, or similar confined spaces.
• For any technical problems with the product, please contact the customer service department.

FCC and CE Radiation Norm

This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the Federal Communications Commission (FCC) rules.

This equipment has been tested and found to comply with the limits of the European Council Directive on the approximation of laws of the member states relating to electromagnetic compatibility (89/336/EEC) according to EN 55022 Class B.

FCC and CE Compliance Statement

These limits are designed to provide reasonable protection against radio frequency interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy. If not installed or used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in television reception. This can be determined by turning the equipment off and on. Users are encouraged to try and correct interference by one or more of the following measures: reorienting or relocating the receiving antenna, increasing the separation between the equipment and the receiver, or connecting the receiver to a different outlet.

RoHS

RoHS stands for Restriction of Hazardous Substances, impacting the electronics industry and many electrical products. The original RoHS (Directive 2002/95/EC) originated in the European Union in 2002 and restricts the use of six hazardous materials in electrical and electronic products. All applicable products in the EU market must comply with RoHS since July 1, 2006.

Directive 2011/65/EU, known as RoHS-Recast or RoHS 2, was published in 2011 by the EU. RoHS 2 includes a CE-marking directive, making RoHS compliance a requirement for CE marking of products. RoHS 2 also added Categories 8 and 9 and includes additional compliance recordkeeping requirements.

CAUTION!

The Federal Communication Commission warns users that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Disclaimer Statement

Thank you for choosing XPower products. Please read this user manual carefully before using the product to ensure correct operation. We strongly recommend backing up your data before using this product to ensure its safety. As the equipment manufacturer, XPower does not assume direct or indirect responsibility for data loss caused by any factor. Manufacturers are not obligated to provide compensation or data recovery. XPower makes no special promises to users and distributors and does not assume responsibility for any unexpected data loss, direct or indirect loss. By using this product, you acknowledge and accept this disclaimer.

Copyright Description

All XPower products and related data belong to XPower International Trading Ltd. XPower International Trading Ltd. holds the rights to produce and copyright. Reproduction is prohibited. This user manual contains information protected by copyright, and without permission from XPower International Trading Ltd., no one is allowed to clone, copy, excerpt, translate, or use it for other purposes.

This user manual does not contain any form of warranty, position statement, or other hints. XPower International Trading Ltd. and its staff will not be held responsible for any direct or indirect data loss, economic loss, or enterprise bankruptcy caused by this user manual or its product information. Furthermore, the product specifications and information in this manual are for reference only and are subject to change without notice. XPower International Trading Ltd. will not be responsible for any errors or omissions in this user manual.

The product name mentioned in this user manual is for identification purposes only and may be part of another company's registered trademark or production rights. XPower's warranty and service will not apply in the following situations:

• The product is not covered by XPower's warranty, specification alteration, or parts replacement authorization.
• The product bar code is vague or lost.

The user manual will be updated as product specifications or drivers change. Please visit the XPower International Trading Ltd. official website for details: www.xpower.com.hk.