Anko KC42902058 Gaming Mouse - Instruction Manual

Product Overview

This manual provides instructions for the Anko Gaming Mouse, model KC42902058. Please read all information carefully before use and keep for future reference.

The mouse features an ergonomic design with a textured grip for comfortable handling during extended use.

Key components include:

• Left Key
• Middle Key (Scroll Wheel)
• Right Key
• DPI + Button (Increases DPI setting)
• DPI - Button (Decreases DPI setting)
• Forward Key (typically for browser navigation)
• Back Key (typically for browser navigation)
• Sniper Key (often used to temporarily lower DPI for precision aiming)

Safety Instructions

Read the instruction manual before using this device and follow all safety instructions to prevent damage from improper use.

Keep the manual for future reference. If the device is transferred to a third party, this manual must be included.

Use this device solely for its intended purpose.

Use this appliance indoors only.

Keep the appliance away from hot surfaces and naked flames.

Always place the appliance on a level, stable, clean, and dry surface.

Protect the appliance from extreme heat and cold, dust, direct sunlight, humidity, and drops or water jets.

Do not immerse the appliance in water or other liquids.

Do not open the housing or insert any objects into the interior.

If the device malfunctions due to electrostatic discharge or power surges, disconnect and reconnect it to the computer.

Connecting the Mouse

1. Plug the USB cable into a free USB port on the computer.
2. The Mouse will connect automatically and can be used immediately.

Features

The Anko Gaming Mouse offers advanced features for an enhanced gaming experience:

• Adjustable DPI: Supports DPI settings from 1000 to 10000, with six configurable levels (1000, 2400, 3600, 5000, 7000, 10000 DPI). The default DPI indicator lights are Red (1st level), Green (2nd), Blue (3rd), Yellow (4th), Cyan (5th), and Purple (6th).
• RGB Lighting: Features 6 distinct RGB light effects: YO-YO mode, Neon mode, Breathing mode, Wave mode, Steady mode, and LED OFF.
• Compatibility: Supports Windows 2000, XP, Vista, Windows 7, 8, and 10 operating systems.
• Report Rate: Configurable report rates including 125Hz, 250Hz, 500Hz, and 1000Hz for responsive input.
• Customization: Advanced functions and settings are available through downloadable driver software.

RGB light mode can be adjusted by pressing the 'Left button + Right button' simultaneously.

For more customized functions and to download the KM42902058 driver, please visit: http://www.intraindustry.com/downloads.html

Driver and Software Functions

The KM42902058 driver software allows for extensive customization of the mouse's performance and features.

System Settings

Configure mouse behavior and performance:

• DPI Settings: Select from six DPI gears (1-6) and set custom DPI values within the supported range.
• Report Rate: Choose between 125Hz, 250Hz, 500Hz, and 1000Hz for input responsiveness.
• Mouse Speed: Adjust the cursor movement speed.
• Double Click Speed: Customize the speed required for a double-click action.
• Scroll Speed: Adjust the speed of the scroll wheel.

Key Functions

Assign custom actions to each mouse button:

Macro Editor

Record and assign complex sequences of keystrokes and mouse clicks to a single button for automated actions.

Macro management allows recording keyboard keys, reaction times, and cycle counts.

Steps to use the Macro Editor:

1. Click 'New' to create a new macro file (e.g., 'a', 'b', 'c').
2. Select options for delay and number of cycles.
3. Click 'Start Record' and press keyboard keys. Recorded actions appear in the edit box.
4. Click 'Stop Record' when finished.
5. Revise recordings by inserting events, deleting, or modifying delays and key inputs.
6. Macros can run once, loop until any button is pressed, or loop until the assigned button is released.
7. Assign the recorded macro to a mouse key.

Macro execution options include:

• Macro runs one-time after pressing the button
• Macro runs endless loop until any button is pressed
• Macro runs endless loop until button is released

Lighting Settings

Customize the mouse's RGB lighting effects:

Choose from 10 lighting modes:

• Static
• Breathing
• Neon
• Wave
• Gliding
• Finger Moving
• Spotlight
• Vertical Flipping
• YO-YO
• Twinkling

Adjust color (RGB values) and brightness for selected effects.

The lighting modes can be cycled through in the following order: Steady mode, Breathing mode, Neon mode, LED OFF, Twinkling mode, Wave mode, Gliding mode, Finger Moving mode, Spotlight mode, Vertical Flipping mode, YO-YO mode.

Other Functions

Additional customization options include:

• Group Function: Combine multiple keyboard keys into a single function (e.g., Ctrl + A + B).
• Media Function: Control media playback (Player, Next, Previous, Stop, Mute, Play/Pause) and volume.
• Windows Function: Access system functions like My PC, Index, Search, Maximize, Minimize, Desktop, and Run.
• Shortcut Function: Assign shortcuts for common tasks like New, Cut, Copy, Paste, Save, Print, Find, Redo, Undo, Select All.
• DPI Function: Includes DPI+, DPI-, DPI LOOP, and Sniper Key functionality.

Uninstalling the Software

To remove the Anko Gaming Mouse driver:

1. Open the computer's Control Panel.
2. Navigate to 'Add or Remove Programs' (or 'Programs and Features').
3. Locate 'KM42902058 Gaming Mouse' in the list.
4. Click 'Delete' to complete the uninstallation.