ROVE R2-4K DUAL PRO: Internal Component Overview
This document provides a visual and textual overview of the internal components of the ROVE R2-4K DUAL PRO car dash camera, based on internal sample photographs.
Page 1: Main Unit Internal View
The first page displays an internal view of the main unit. Key identifiers noted include the board designation "R2DPRO-MAIN-A2" and capacitors labeled "RTD 5.5 V 5F". A specific area is marked as "Ant Location". The date "2025/01/09" is also visible.
Page 2: Antenna Connection Assembly
This section shows internal views of the antenna connection assembly. Adhesive from "3M" is present, along with markings "富强 FQ-330".
Page 3: Main Unit Internal Photos
Two internal photographs of the main unit are presented. These views highlight the camera module and the main circuit board, again showing components like "R2DPRO-MAIN-A2" and "RTD 5.5V 5F" capacitors, dated "2025/01/09".
Page 4: Main Printed Circuit Board (PCB) Details
This section focuses on the main Printed Circuit Board (PCB). It shows connections for "SPK" (speaker) and "MIC" (microphone), and the "ANT" (antenna) connector. Memory chips identified include "NANYA2427 NTSCC128M16JR-EX" and "NANYATA NTSCO120M16R-EX". The board is marked "R2DPRO-MAIN-A" and dated "2025/01/09".
Page 5: Camera Sensor Module PCB Details
The final section displays internal photographs of the camera sensor module's PCB. The board is identified as "R2DPRO-SENSOR-A1", with a component marking "DM250314" and dated "2024-11-25".
