User Manual for Kinexon models including: KNX-ETAG1, KNXETAG1, 2ALC5-KNX-ETAG1, 2ALC5KNXETAG1, KNX-ETAG1 UWB Tracking Tag with ePaper Display, UWB Tracking Tag with ePaper Display
KINEXON Inc. KNX-ETAG1 UWB Tracking Tag with ePaper Display 2ALC5-KNX-ETAG1 2ALC5KNXETAG1 knx etag1
File Info : application/pdf, 18 Pages, 270.06KB
DocumentDocumentTHE KINEXON ePaper Tag (Non-Rechargeable) User Manual Paperless Logistics/Manufacturing Exported on 03/18/2022 Paperless Logistics/Manufacturing THE KINEXON ePaper Tag (Non-Rechargeable) - User Manual Table of Contents 1 Introduction ............................................................................................................ 4 2 Safety Information .................................................................................................. 6 3 Disclaimer................................................................................................................ 7 4 Intended Use ........................................................................................................... 8 5 Key Facts.................................................................................................................. 9 6 External Interfaces ................................................................................................ 12 6.1 Wireless Connection ................................................................................................................... 12 6.2 Interaction Buttons..................................................................................................................... 12 6.3 Visual LEDs................................................................................................................................... 13 6.4 Tag Battery .................................................................................................................................. 14 7 Hardware Variants ................................................................................................ 15 8 Accessories ............................................................................................................ 16 8.1 Holder .......................................................................................................................................... 16 9 Regulatory and Legal Information ....................................................................... 17 9.1 FCC Compliance .......................................................................................................................... 17 9.2 ISED Caution................................................................................................................................ 17 2 Paperless Logistics/Manufacturing THE KINEXON ePaper Tag (Non-Rechargeable) - User Manual · Introduction(see page 4) · Safety Information(see page 6) · Disclaimer(see page 7) · Intended Use(see page 8) · Key Facts(see page 9) · RF Specifications(see page 9) · Physical Specifications(see page 9) · Environmental Specifications(see page 10) · Mechanical Drawing(see page 11) · Label Specifications(see page 11) · External Interfaces(see page 12) · Wireless Connection(see page 12) · Interaction Buttons(see page 12) · Visual LEDs(see page 13) · Tag Battery(see page 14) · Hardware Variants(see page 15) · Accessories(see page 16) · Holder(see page 16) · Regulatory and Legal Information(see page 17) · FCC Compliance(see page 17) · ISED Caution(see page 17) 3 Paperless Logistics/Manufacturing THE KINEXON ePaper Tag (Non-Rechargeable) - User Manual 1 Introduction The KINEXON ePaper Tag is the Ultra-Wideband basic component for a paperless material and goods handling in industry. The ePaper solution combines high precision UWB localization technology with smart process visualization. The KINEXON ePaper Tag can be placed on workpieces and load carriers without leaving any residue to track their entire value-added process. In addition, an integrated display automatically informs about production steps that have already been completed and those that are still pending. As a result, all information is digitized, repeated and printing processes are eliminated. KINEXON ePaper solution is flexible and provides complete control and maximum flexibility for dynamic production. The combination of high precision real time localization and smart visualization is the key to a paperless production. There are various potential use cases such as: · ePaper-based workflow-instructions for shop floor employees. · Real-time interaction through configurable button (e.g. signal for replenishment). · Dynamic labeling with current status of the product or material. · Digitization of all production & process relevant information. Introduction 4 Paperless Logistics/Manufacturing THE KINEXON ePaper Tag (Non-Rechargeable) - User Manual Introduction 5 Paperless Logistics/Manufacturing THE KINEXON ePaper Tag (Non-Rechargeable) - User Manual 2 Safety Information · Read and follow all instructions before using the KINEXON ePaper Tag. · Never open the case of the KINEXON ePaper Tag. There are no user serviceable parts or replaceable parts inside the case. · Do not use the KINEXON ePaper Tag if it has been damaged. · Use the Tag according to the following specifications. KINEXON will not take any responsibility or liability in case of accidents caused by misuse of the battery: · Stop using the device immediately and stay away from battery if: · The battery was exposed to high temperatures (60 °C or above). · The battery shows signs of leakage. · There is a noticeable odor coming from the battery. · Avoid directly hitting or dropping the battery. Safety Information 6 Paperless Logistics/Manufacturing THE KINEXON ePaper Tag (Non-Rechargeable) - User Manual 3 Disclaimer The information in this document is subject to change without notice. KINEXON GmbH assumes no responsibility for inaccuracies or omissions and specifically disclaims any liabilities, losses, or risks, personal or otherwise, incurred as a consequence, directly or indirectly, of the use or application of any of the contents of this document. For the latest documentation, contact KINEXON GmbH. Disclaimer 7 Paperless Logistics/Manufacturing THE KINEXON ePaper Tag (Non-Rechargeable) - User Manual 4 Intended Use This manual describes the setup and use of the KINEXON ePaper Tag. Use this product only for the purpose it was designed for. Intended Use 8 Paperless Logistics/Manufacturing THE KINEXON ePaper Tag (Non-Rechargeable) - User Manual 5 Key Facts RF Specifications Positioning Principle Frequency Range Update Rate Positioning Data Positioning Accuracy Real Time Location System (RTLS), Radio-based, Ultra-wideband (UWB) UWB (IEEE 802.15.4a): UWB Channel 3 (4.25 - 4.75 GHz, Low Duty Cycle Interference Mitigation (LDC) according to EN 302 065-1) UWB Channel 5 (6.25 - 6.75 GHz) Average EIRP < -41 dBm / 1 MHz Peak EIRP < 0 dBm / 50 MHz Configurable, typically 1 Hz in motion, 0.1 Hz in standstill 3D (x, y, z) < 20 cm (depending on environment) Physical Specifications Display Button Indicators Accelerometer Battery Battery Lifetime System Power 4.2", 85 x 64 mm (400x300 pixel) 2-color: black/white, display update time 3 s (25°C) 3-color: black/white/red, display update time 14 s (25°C) Two buttons for status and manual event trigger (event sent via RF) Two LEDs (Status and Action) 3-axis, +/-2 g to +/-16g, up to 200 Hz Built-in 10Ah replaceable Li primary battery Up to 5 years (depending on update rate) 3.0V / 200 mA Key Facts 9 Paperless Logistics/Manufacturing THE KINEXON ePaper Tag (Non-Rechargeable) - User Manual Physical Specifications Material Weight Dimensions Acrylonitrile styrene acrylate (ASA) 197g Device only: (141 x 104.3 x 14.2) mm Incl. holder: (168.8 x 104.3 x 24.6) mm Environmental Specifications Operating Temperature Storage Temperature Protection Class Regulatory Compliance (cert. ongoing) 0 °C to +50 °C incl. battery -20 °C to +30 °C incl. battery IP67 · FCC Part 15 subpart C · 15.250 (for indoor and outdoor use) · ETSI EN 302065-1 · ETSI EN 303883 · ETSI TS 103361 · SRRC · Draft EN 301 489 - 1, -33 · EN 61000-4-2, -4-3 · EN 62479 · 1999/519/EC · UN 38.3 · IEC 62133 Key Facts 10 Paperless Logistics/Manufacturing THE KINEXON ePaper Tag (Non-Rechargeable) - User Manual Mechanical Drawing Label Specifications Device Outer Size: (59.5 x 15.5) mm Key Facts 11 Paperless Logistics/Manufacturing THE KINEXON ePaper Tag (Non-Rechargeable) - User Manual 6 External Interfaces 6.1 Wireless Connection For wireless connection a Ultra-Wideband (UWB) interface according to IEEE 802.15.4 standard is implemented. 6.2 Interaction Buttons Action Button (Upper Button) Description Duration Short (normal) press 150ms Very long press >8s Status Button (Lower Button) Description Duration Short (normal) press 150ms Effect Toggles alarm mode status (on or off). The content of ePaper display shown for each mode can be configured on the RIoT web interface Hardware reset Effect · If there is only one page configured on the RIoT web interface, the Tag refreshes the ePaper display · If there is more than one page configured on the RIoT web interface, the Tag switches the ePaper display to the next available page · If the last page is already shown, the Tag switches the ePaper display back to the first page External Interfaces 12 Paperless Logistics/Manufacturing THE KINEXON ePaper Tag (Non-Rechargeable) - User Manual 6.3 Visual LEDs Info LED (Left LED) Color Red Dynamic Type & Duration Constant, 1s Dynamic Explanation Either action or status button was pressed Further info LED behavior including color & blinking duration can be configured on the RIoT web interface Power-on reset Green Yellow Purple Constant, ~1s Constant, ~7s Constant, duration depends on firmware size Tag bootloader is starting Tag in Bootloader and waiting for connection Tag is being bootloaded with new firmware Status LED (Right LED) Color Type & Duration Blue/Green alternating flashing, infinite Blue/Red alternating flashing, infinite Red flashing, 1s Explanation Tag is running, the speed of flashing equals update rate of Aloha uplink Tag is running with low battery, the speed of flashing equals update rate of Aloha uplink Tag is going to reset due to unrecoverable internal error detected by firmware External Interfaces 13 Paperless Logistics/Manufacturing THE KINEXON ePaper Tag (Non-Rechargeable) - User Manual 6.4 Tag Battery A primary soft cell non-rechargeable battery is used Type CP7839109 Nominal Voltage 3.0V Capacity 10000mAh Size (8.0 x 40.0 x 110) mm Weight 63.0g External Interfaces 14 Paperless Logistics/Manufacturing THE KINEXON ePaper Tag (Non-Rechargeable) - User Manual 7 Hardware Variants Variant KNX-T5.1-1.1-x KNX-T5.1-1.4-x KNX-T5.1-4.1-x KNX-T5.1-4.4-x KNX-T5.1-2.2-x KNX-T5.1-2.5-x KNX-T5.1-5.2-x KNX-T5.1-5.5-x Description ePaper Tag with non-rechargeable battery, b/w/r display ePaper Tag with non-rechargeable battery, b/w display ePaper Tag with non-rechargeable battery, b/w/r display, Bluetooth ePaper Tag with non-rechargeable battery, b/w display, Bluetooth ePaper Tag with rechargeable battery, b/w/r display ePaper Tag with rechargeable battery, b/w display ePaper Tag with rechargeable battery, b/w/r display, Bluetooth ePaper Tag with rechargeable battery, b/w display, Bluetooth Hardware Variants 15 Paperless Logistics/Manufacturing THE KINEXON ePaper Tag (Non-Rechargeable) - User Manual 8 Accessories 8.1 Holder The KINEXON ePaper Tag is clipped to the holder. The holder can be mounted using following options: · Velcro tape: recommended width of tape is 15mm. · Zip-tights: maximum width of zip-tights is 15mm. · Magnets: 18x8x4 N45 magnets hold into place with crushing-ribs that can be pressed in manually. · Screws: lateral placing using countersink screws (dmax=3.5mm, dheadmax=7.2 mm), central placing using cylinder head, pan head, button head screws (dmax=5 mm, dheadmax=9.5 mm). Accessories 16 Paperless Logistics/Manufacturing THE KINEXON ePaper Tag (Non-Rechargeable) - User Manual 9 Regulatory and Legal Information The KINEXON ePaper Tag has been designed to be in compliance with both the U.S. FCC Part 15 subpart F regulations, section 15.250 and with the European Union ETSI EN 302 065 standards. Two different versions of the KINEXON ePaper Tag are available, one version supports the FCC emissions mask (Region 1) and the second supports the ETSI standard mask (Region 2). 9.1 FCC Compliance This device complies with 47 CFR Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device may not be employed for the operation of toys. Operation onboard an aircraft, a ship or a satellite is prohibited. The use of this device mounted on outdoor structures, e.g., on the outside of a building or on a telephone pole, or any fixed outdoors infrastructure is prohibited. Moreover, the following statements apply: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. User information according to FCC 15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation. User information according to FCC 15.21 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. 9.2 ISED Caution This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference (2) This device must accept any interference, including interference that may cause undesired operation of the device. Regulatory and Legal Information 17 Paperless Logistics/Manufacturing THE KINEXON ePaper Tag (Non-Rechargeable) - User Manual These devices are not permitted for operation on board aircraft or satellites and shall also not be used for operating toys. The use this device mounted on a fixed outdoor infrastructure, including antennas mounted on outdoor structures such as poles or buildings, is not permitted, except for operation on board ships or land vehicles. Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS) d'Innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes: (1) Cet appareil ne doit pas causer d'interférences (2) Cet appareil doit accepter toutes les interférences, y compris celles susceptibles de provoquer un fonctionnement indésirable de l'appareil. Les appareils ne peuvent pas être utilisés à bord d'aéronefs ou de satellites et ils ne peuvent pas être utilisés pour faire fonctionner des jouets. L'utilisation de cet appareil monté sur une infrastructure fixe d'extérieur, comprenant les antennes montées sur des structures externes telles que des poteaux ou des bâtiments, n'est pas autorisée, sauf lorsque les structures en question sont des bateaux ou des véhicules terrestres. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. Cet équipement est conforme aux limites d'exposition aux radiations IC RSS-102 établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps. Regulatory and Legal Information 18RealObjects PDFreactor(R) 10.1.10722.8, Serial No: 3945, Licensed for: K15t GmbH GPL Ghostscript 9.55.0