FSP FSP120-ABAN3 Switching Power Adapter - Safety and Technical Documentation

Company: FSP Corporation (全漢企業股份有限公司)

Manufacturer (Primary): Zhonghan Electronics (Shenzhen) Co., Ltd.

Model Name: FSP120-ABAN3

Model No/Type: FSP120-ABAN3

Document Number: SFD-00003866

Version: 03

Issue Date: 2022/04/26

Safety Type: KC / Information Technology Equipment (KC/資訊類)

Address (FSP): No. 22, Jianguo E. Rd., Taoyuan Dist., Taoyuan City 330, Taiwan (R.O.C)

Contact (FSP): TEL: +886-3-375-9888, FAX: +886-3-375-6966

Safety Certificate No.: HU10142-19197B

Application No.: KCA2022-01173

Manufacturer/Importer: Zhonghan Electronics (Shenzhen) Co., Ltd.

Address: Building A2 in Section A, Building 4,6,7 in Section C, JuYuan Industrial Zone, TangWei Village, FuYong Town, BaoAn Dist., Shenzhen City, Guangdong, China

Product Name: Switching Power Adapter (직류전원장치)

Basic Model Name: FSP120-ABAN3

Rating/Safety Standard Model Classification: 100-240 V~, 50-60 Hz, 1.8 A (O/P: 19 Vdc, 6.32 A)

Test Standard: K 60950-1(2011-12)

Issuing Body: Korea Testing Certification & Research Institute (한국기계전기전자시험연구원)

Certificate Issue Date: 2022/04/21

This certificate is issued in accordance with Article 9(2), 9(4), 10(2) or 15(2) of the Enforcement Rule of the Electrical Appliances and Consumer Products Safety Control Act.

The following tables detail the components used in the FSP120-ABAN3 Switching Power Adapter, including their specifications and certifications.

The following table details revisions made to the safety certificate:

Notification Application Number: 202217210000109705

Receipt Date: 2022-04-07

Subject: Zhonghan Electronics (Shenzhen) Co., Ltd.

Equipment Name: Switching Power Adapter

Registration Number: R-R-FSZ-FSP120-ABAN3

Registration Date: 2022-04-07

Technical Standards:

• Mainboard changing: Version 1
• Mainboard changing: Version 2
• Add alternative schematic / PCB layout, which is denotes as type B. It is similar to previous, which denotes as type A; except for major change for ICX (controller IC integrating capacitor discharging function)(U101).
• Application Field: EMC

This notification confirms the change processing for the broadcasting communication equipment in accordance with Article 16 of the "Act on Evaluation of Conformity of Broadcasting Communication Equipment, etc.".

Date of Notification: 2022/04/07

Issued by: Director General of National Radio Research Agency (국립전파연구원장)

Trade Name or Registrant: Zhonghan Electronics (Shenzhen) Co., Ltd.

Equipment Name: Switching Power Adapter

Equipment code / Additional Equipment code: IMI

Basic Model Number: FSP120-ABAN3

Series Model Number: -

Registration No.: R-R-FSZ-FSP120-ABAN3

Manufacturer/Country of Origin: Zhonghan Electronics (Shenzhen) Co., Ltd. / China

Date of Registration: 2019-08-02

This is to certify that the above equipment has been registered under Clause 3, Article 58-2 of the Radio Waves Act.

Date of Verification: 2022/04/07

Issued by: Director General of National Radio Research Agency

Note: Broadcasting communication equipment with registration must be affixed with the "Conformity Assessment Mark" (적합성평가표시) before distribution. Failure to comply may result in fines and cancellation of registration.

Images showing the internal circuitry of the FSP120-ABAN3 switching power adapter, including various components and PCB layouts.

1. Critical Components and Materials: Changes to registered critical components or materials, which directly affect safety, require an application for revision of the certificate or safety confirmation. Unauthorized changes may lead to administrative measures under the Electrical Appliances and Consumer Products Safety Control Act.

2. Follow-up Factory Inspection: Refusal, obstruction, or evasion of periodic inspections (including sample testing) may result in the cancellation of the safety certification according to Article 11 of the Electrical Appliances and Consumer Products Safety Control Act.

3. Notification of Changes: If there are changes to factory address, president name, company name, or component information related to safety certification or safety confirmation, an application for revision or notification of changes must be submitted. Failure to do so may result in administrative measures under the Electrical Appliances and Consumer Products Safety Control Act.

4. Conditional Certification Items: (Details not specified in the provided text)