Omron M3 Comfort / X3 Comfort Blood Pressure Monitor: Instruction Manual
Model Numbers: HEM-7155-E, HEM-7155-EO
Document Version: IM2-HEM-7155-E-01-03/2019, 2870434-2A
Please read this instruction manual carefully before use.
1 Package Contents
Contents of the package:
- Instruction Manual
2 Preparing for a Measurement
Prepare for measurement at least 30 minutes before.
For 5 minutes before: Relax and rest.
3 Installing Batteries
Install 4 x 1.5V AA batteries.
[Diagram description: Shows battery compartment with polarity markings and batteries being inserted.]
4 Setting Date and Time
Set year, month, day, hour, and minute using the Forward/Back buttons.
[Diagram description: Shows the display with year, month, day, hour, minute fields and buttons for adjustment.]
5 Applying the Cuff on the Left Arm
A: The tube side of the cuff should be positioned 1-2 cm above the inside of the elbow.
B: Ensure the air tube is on the inside of your arm. Wrap the cuff securely so it cannot slip around the arm.
[Diagram description: Illustrates cuff placement on the arm, showing the 1-2 cm gap above the elbow and the tube position.]
If taking measurements on the right arm, refer to additional instructions.
6 Sitting Correctly
- Sit with your back and arm supported.
- Place the arm cuff at the same level as your heart.
- Keep feet flat on the floor, legs uncrossed, remain still, and do not talk.
[Diagram description: Shows a person sitting correctly for measurement.]
7 Selecting User ID (1 or 2)
Switching user ID enables you to save readings for 2 people.
[Diagram description: Shows how to select User ID 1 or 2.]
8 Taking a Measurement
When the [START/STOP] button is pressed, the measurement is taken and saved automatically.
[Diagram description: Shows the monitor with the START/STOP button.]
9 Checking Readings
1 Appears if "SYS" is 135 mmHg or above and/or "DIA" is 85 mmHg* or above.
2 Appears when an irregular rhythm** is detected during a measurement. If it appears repeatedly, OMRON recommends consulting your physician.
3 Appears when your body moves during a measurement. Remove the arm cuff, wait 2-3 minutes, and try again.
4 Cuff is tight enough. If not, apply cuff again MORE TIGHTLY.
*The high blood pressure definition is based on the 2018 ESH/ESC Guidelines.
**An irregular heart beat rhythm is defined as a rhythm that is 25% less or 25% more than the average rhythm detected during a measurement.
10 Using Memory Functions
Before using memory functions, select your user ID.
10.1 Readings Stored in Memory
Up to 60 readings are stored.
10.2 Average of Latest 2 or 3 Readings
Calculates the average of the last 2 or 3 readings taken within a 10-minute span.
10.3 Deleting All Readings
Allows deletion of all stored readings.
11 Other Settings
11.1 Restoring to the Default Settings
Resets the device to factory default settings.
Special Measurement Condition
If your systolic pressure is more than 210 mmHg: After the arm cuff starts to inflate, press and hold the [START/STOP] button until the monitor inflates 30 to 40 mmHg higher than your expected systolic pressure.
12 Optional Medical Accessories
- Arm Cuff (HEM-FL31) - Fits arm circumferences 22 - 42 cm
- AC Adapter (HHP-CM01 / HHP-BFH01)
Note: Do not discard the air plug. It can be used with the optional cuff.
Troubleshooting / Error Messages
For error messages or other problems, refer to the full manual or contact support.
