Aqara Cube Quick Start Guide
Product Introduction
Aqara Cube is a smart wireless controller that recognizes multiple actions. Configure the Cube via app, and you can use it to control various smart accessories through linkage control.
- A hub is required.
- This product is for indoor use only.
The device is a cube-shaped smart controller. One side features a circular area labeled "Reset Button" with the following functions: "Long Press for 5s: Reset" and "Single Press: Effective Range Test". Below the reset button is a circular area labeled "Indicator Light".
Quick Setup
- Please add the Hub to the app according to the Hub Quick Start Guide.
- Please open the app, tap "Home" and then tap "+" in the top right corner to enter "Add Device (Accessory)" page. Select "Cube", and add it according to instructions.
If the connection fails, please move the accessory closer to the Hub and try again.
Effective Range Test: Single swing the Cube or single press the reset button in the Cube. If the Hub makes voice prompts, it indicates that the Cube can communicate effectively with the Hub.
Avoid metal surfaces to maximize signal strength.
Specifications
| Model | MFKZQ01LM |
|---|---|
| Dimensions | 45 x 45 x 45 mm (1.77 x 1.77 x 1.77 in.) |
| Wireless Protocol | Zigbee |
| Battery | CR2450 |
| Operating Temperature | -10° – +50° C |
| Operating Humidity | 0 – 95% RH, no condensation |
| Online Customer Service | www.aqara.com/support |
| support@aqara.com | |
| Manufacturer | Lumi United Technology Co., Ltd. |
| Address | 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road, Liuxian Ave, Taoyuan Residential District, Nanshan District, Shenzhen, China. |
