User Guide for TUNDRA DRONE models including: DJI MAVIC 3, DJI MAVIC 3 Automoving Light Drone, Automoving Light Drone, Light Drone, Drone
AUTOMOVING LIGHT Address: Suomaluodda 44, 9520 Kautokeino, Norway Designed in Norway TUNDRA DRONE FOR DJI MAVIC 3 SCAN ME FOR USER MANUAL https://tundradrone.com/support
Place the Automoving light Battery into the Automoving light's battery slots' starting point. Press in the «Battery Latches» on both.
File Info : application/pdf, 1 Pages, 1.16MB
DocumentDocumentINSTALLATION 1 2 QUICK START GUIDE AUTOMOVING LIGHT FOR DJI MAVIC 3 Mount the green tracking mark sticker aligned to the circle on the aircraft's camera. Mount the red tracking sticker on the aircraft's camera (see illustration). Position the Automoving light unit below the aircraft. Insert the aircraft from above into the Automoving light's inner body. 3 4 TUNDRA DRONE Place the Automoving light Battery into the Automoving light's battery slots' starting point. Press in the «Battery Latches» on both sides of the battery and position the battery to the battery slots' starting point. Slide the battery forwards along the battery slots and into the Automoving light's battery connector. Make sure the battery is mounted securely and that the «Battery Latches» have clicked into place on both sides. 5 6 Find the detailed User Manual: https://tundradrone.com/support The image illustrates a correctly mounted battery. When correctly mounted, there should be no «GAP» between the battery and the battery connector on the Automoving light unit. Hold the power button on the battery down for around 3 seconds to turn on the Automoving light. On startup the floodlight LED will blink once, when the boot sequence is ready the lamp will blink one more time. Manufactured by Tundra Drone AS Address: Suomaluodda 44, 9520 Kautokeino, Norway Designed in Norway SCAN ME FOR USER MANUAL