WVC-600(Life) Micro Inverter User Manual

IoT Monitoring Platform

Smart mobile "core" life

• CO-2 induced environmental analysis
• Daily and total energy generation in kWh
• Actual DC input voltage, current and power
• Actual AC output voltage, current and power
• Inverter temperature
• Historical (daily, weekly, monthly) power curve
• Power losses due to weather induced effects
• Optional limitation of power output
• Online switch for the inverter start stop

Download on the App Store and Google Play.

Micro Inverter Overview

The WVC-600(Life) is a micro inverter designed for efficient energy conversion. It features a wireless series-R3 communication mode and supports Wi-Fi connectivity for monitoring.

Key Features:

• Model: WVC-600
• Recommended Use Panels: 2*375Watt
• Output Voltage Modes: 120/230V
• PV Open Circuit Voltage: 33-60VDC
• Operating Voltage Range: 22-60V
• Starting Voltage Range: 22-60V
• Short-Circuit Current: 2*15A
• Maximum Working Current: 2*12A
• Output Parameters (@120V / @230V):
  • Output Peak Power: 600Watt / 600Watt
  • Rated Output Power: 580Watt / 580Watt
  • Output Current: 5A / 2.6A
  • AC Voltage Range: 85-160VAC / 180-280VAC
  • AC Frequency Range: 48-51Hz/58-61Hz
  • Power Factor: >95%
• Efficiency:
  • Output Efficiency: >95%
  • Static MPPT Efficiency: 99.5%
  • Max Output Efficiency: 95%
• Loss of power at night: <0.5W
• Total current harmonics: <5%
• Temperature Range: -20°C to +50°C
• Size (L×W×H): 283mm×200mm×41.6mm
• Net Weight: 1.46kg
• Waterproof Grade: IP65 NEMA3R
• Heat Dissipation Mode: Self-cooling
• Communication Mode: Wi-Fi
• Power Transmission Mode: Reverse transmission, Load priority
• Monitoring System: APP
• Electromagnetic Detection: EN61000-6-1:2007 EN6100-6-3:2007+A1:2011+AC:2012
• Power Grid Standard: EN50549-1, EN 50549-2, NBR 16149:2013, UL1741
• Power Grid Detection: IEC/EN 62109-1, IEC/EN 62109-2, IEC 62116, IEEE 1547
• Certificate: CE, CEC, ETL

System Diagram

The system diagram illustrates the connection of the micro inverter to the power grid, including Wi-Fi router and cloud server for data exchange and app control.

Connection Types:

• With N wire connection (Single phase 120/230V): L/L1, N/L2, G-Ground
• No N wire connection (Single phase 120V): L1-Live wire, G-Ground

LED Indicator Status:

• Inverter not working (connected to grid): Red light always on.
• Inverter working state (MPPT locked): Blue light flashes.
• Inverter not working (not connected to grid): Red light flashes.
• Inverter working state (MPPT locked): Blue light flashes, and red light flashes once every three seconds.

Note: A professionally customized AC bus with a T-type connector can be purchased for modular micro-inverter branch wiring.

Cloud Intelligence APP

The Cloud Intelligence APP allows users to monitor and control the micro inverter system. It provides real-time data transmission, environmental analysis, and power output adjustments.

Features:

• Real-time data transmission
• CO-2 induced environmental analysis
• Daily and total energy generation in kWh
• Actual DC input voltage, current, and power
• Actual AC output voltage, current, and power
• Inverter temperature
• Historical power curves
• Power loss analysis
• Optional power output limitation
• Online inverter start/stop

Installation Requirements:

• Connect the communication antenna.
• Install in a location with good Wi-Fi signal coverage.
• Ensure the Wi-Fi network is 2.4G.
• Consider a Wi-Fi signal booster if needed.
• Turn on Bluetooth on the mobile phone.

Connection Modes

Bluetooth Mode

1. Turn on mobile phone Bluetooth, click '+' to add device.
2. When the inverter appears on the discovery page, click '+'.
3. Select Wi-Fi signal, enter Wi-Fi password, click Next.
4. The system enters network configuration state.

Wi-Fi Mode

1. If Bluetooth distribution fails, scan the QR code to activate network operation.
2. Scan the QR code on the inverter.
3. Select Wi-Fi signal, enter Wi-Fi password, click Next.
4. The system enters network configuration state.

Accessories

Accessories include Micro Inverter, Antenna, Screw Kit, AC Plug, and WVC-MODEM-Collector.

Packing Specifications

• Each (Packing): Weight: 2.2 KG, Size: 342×240×115mm
• Box (5PCS): Weight: 11.5 KG, Size: 440×380×260mm