Connect your Innr Smart Button to Philips Hue

Step 1: Connect the Smart Button to the Philips Hue Bridge

Open the Philips Hue app and start the searching for lights.

Remove the plastic tab to put the Smart Button in pairing mode. The LED on the front will start blinking once per second.^*

^* If the LED is not blinking, press and hold the reset button behind the battery lid for 3 seconds.

The LED will rapidly blink twice to confirm it's successfully connected.
NOTE: The Smart Button will not appear in the Philips Hue app.

Turn the light off using the wall switch for at least 5 seconds, then turn it back on. The light will be in pairing mode for 1 minute.

Press the Smart Button 3 times in quick succession, holding the third press for 3 seconds. The LED on the Smart Button will blink once per second.

Bring the Smart Button close to the light (less than 10 cm). The light will blink to confirm successful connection.

Repeat Step 2 for all lights you wish to connect to the Smart Button.

✔️ Successful! You can now control the connected light(s) from the app and with the Smart Button.

	Connecting Innr Lights to Philips Hue: A Setup Guide This guide provides step-by-step instructions on how to connect Innr smart lights to a Philips Hue system, covering pairing, troubleshooting, and compatibility with smart home platforms.
	Innr SP 244 Smart Plug Installation and Safety Guide Comprehensive guide for the Innr SP 244 Smart Plug, covering installation, operating instructions, safety precautions, overload protection, and limited warranty information. Includes FCC compliance details.
	Innr SP 240 Smart Plug User Manual and Safety Instructions This document provides instructions and safety information for the Innr SP 240 Smart Plug, a device that allows for smart control of lighting and appliances via a mobile application.
	Innr Smart Lighting: Quick Start Guide and Safety Information Learn how to connect your Innr smart lighting device to the bridge and perform a factory reset. Includes important safety instructions and declaration of conformity for Innr products.
	Innr Smart Lighting: Setup, Safety, and Conformity Learn how to connect and factory reset your Innr smart lighting products. Includes important safety instructions and the EU Declaration of Conformity for various Innr models.
	Innr Smart Lighting: Connection and Factory Reset Guide Comprehensive guide for Innr smart lighting products, detailing how to connect to a bridge and perform a factory reset. Includes essential safety information and EU declaration of conformity.