⚠️ Safety Precautions
WARNING
- Please read and understand this entire manual before attempting to assemble or install the product.
- Some parts may contain sharp edges. Please wear protective gloves when assembling or installing the product.
- Assemble the item on a soft, non-abrasive surface such as carpeting to avoid damage.
- Keep all children and pets away from the assembly area. Children and pets should be supervised when they are in the area of the sofa set construction.
- The item is heavy. Please handle with care. Two or more people are required for this assembly.
CAUTION
- The chair is for seating purpose only. Do not stand on or use any part of this item as a step ladder.
- Recommended maximum sitting weight for the chair set is 286lbs/130kgs. Please do not exceed the weight limitations of this item.
- Firmly secure all bolts, screws, and knobs before use.
- Reconfirm that all bolts, screws, and knobs are secure every 90 days.
- Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
- If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made and/or factory replacement parts are installed.
ATTENTION
- Before assembling the product, compare every part with the parts list. If any part is missing or damaged, do not attempt to assemble the product and contact Pamapic customer service immediately.
- Pamapic values every customer's using experience. Please feel free to provide feedback or advice; an efficient solution would be offered soon.
- Recommend using a waterproof furniture cover for the entire Patio chaise lounge Set when out of use to keep them performing longer.
- The chair cushion cover can be removed and cleaned by a cleaner when it has stains.
? Warranty Coverage Requirements
- Pictures of the damaged parts.
- The name or MODLE number of your product.
- Please gather all of this information BEFORE contacting Pamapic.
- Do not use this item in a way inconsistent with the manufacturer's instructions, as this could void the product warranty.
? Instructions: Patio Lounge Chair
The patio chaise lounge set is delivered with two boxes. One box contains one patio lounge chair and a patio table, and the other box contains one patio lounge chair.
The accessories list and installation instructions for one patio lounge chair are as follows.
Parts List
Diagram shows a single patio chaise lounge with a label "X 1".
| Part Identifier | Description | Quantity |
|---|---|---|
| A1 | Frame Component | 1 PC |
| A2 | Frame Component | 1 PC |
| A3 | Connecting Rod/Bolt | 2 PCS |
| A4 | Cushion | 1 PC |
| a1 | Bolt (M6*25) | 4 PCS |
| a2 | Washer | 4 PCS |
| a3 | Allen Wrench | 1 PC |
Assembly Steps
Step 1
Attach frame components A1 and A2 to the main structure using bolts (a1) and washers (a2). The diagram shows these parts being secured to the underside of the chaise lounge frame.
Diagram shows two frame parts (A1, A2) being attached to the chaise lounge frame using bolts (a1) and washers (a2). An inset shows a close-up of the connection with labels a1, a2, and the connection points on the frame.
NOTICE: Please assemble the item on a soft, non-abrasive surface such as carpeting to avoid damage.
Step 2
Insert and secure the connecting rods/bolts (A3) into the designated points on the chaise lounge frame. The diagram illustrates how these rods connect different sections of the frame, likely for structural support or adjustment mechanisms.
Diagram shows two connecting rods (A3) being inserted into the chaise lounge frame. An inset shows a close-up of the connection point.
Step 3
Place the cushion (A4) onto the chaise lounge. The cushion is designed to fit the contours of the lounge.
Diagram shows the cushion (A4) being placed onto the assembled chaise lounge frame.
NOTICE: You can fix the cushion through the band.
