GAME NIR ProX Wireless Game Controller GN

Controller Overview

This section describes the layout and buttons of the GAME NIR ProX Wireless Game Controller.

Top View:

• Capture Button
• HOME Button
• + Button
• Y Button
• X Button
• A Button
• B Button
• Left Stick (Pressable as L3)
• Right Stick (Pressable as R3)
• Control Pad
• SYNC Button (Top)
• L Button (Shoulder)
• R Button (Shoulder)
• ZL Button (Trigger)
• ZR Button (Trigger)

Bottom/Front View:

• TURBO Button
• MR Button (Macro/Memory)
• ML Button (Macro/Memory)
• XR Button (Action/Trigger)
• XL Button (Action/Trigger)
• RESET Button
• Player LED (Indicates player number)
• Vibration Intensify Button (Left side of back)
• Vibration Weaken Button (Right side of back)

Game Device Pairing Methods

Nintendo Switch Console

Wireless Pairing With Bluetooth

First-time Pairing: From the Switch HOME Menu, select "Controllers", then "Change Grip and Order". Press and hold the "SYNC Button" on the top of the controller for about 3-5 seconds until the indicator light flashes rapidly.

Subsequent Connections + Wake Console: After the first successful pairing, briefly press the HOME button when near the console. The indicator light will flash, connecting and waking the Switch.

Wired Pairing With USB

In TV Mode, connect the controller to a Nintendo Switch dock using a USB to USB-C charging cable. Ensure "Pro Controller Wired Communication" is enabled in System Settings > Controllers and Sensors.

Android/iOS/ Apple Arcade

1. On your device, open Settings and go to Bluetooth preferences.
2. On the controller, press and hold the B+HOME button for XBOX mode or Y+HOME button for NS mode for pairing.
3. On your device, locate and select "XBOX Controller" or "Pro controller" from the available Bluetooth devices list.
4. Tap to connect and pair.

Note: Ensure the game supports controller functionality. Most mobile devices prioritize XBOX mode.

STEAM | PC

Wired Connection Pairing with USB

Use the included USB-A to USB-C cable to connect directly. The controller defaults to XBOX mode. To enable NS mode, press and hold R3 (Right Stick down) while connecting the USB cable.

Wireless Connection Pairing with Bluetooth

Requires Bluetooth functionality on your computer.

NS mode:

1. Press and hold Y+HOME for 2-3 seconds for pairing.
2. On your PC, open Bluetooth settings, click "Add device," and select "Pro controller."
3. Confirm and connect.

XBOX mode:

1. Press and hold B+HOME for 2-3 seconds for pairing.
2. On your PC, open Bluetooth settings, click "Add device," and select "XBOX controller."
3. Confirm and connect.

GAMEPAD mode:

1. Press and hold X+HOME for 2-3 seconds for pairing.
2. On your PC, open Bluetooth settings, click "Add device," and select "GAMEPAD."
3. Confirm and connect.

Notices and Important Information

Device Mode Switching

When connecting to different devices (e.g., iOS/Android vs. Switch), you may need to switch modes. For iOS/Android, press X+Home simultaneously. For Switch, press Y+Home simultaneously.

Controller functionality (gyro aiming, pointer movement, vibration) may vary based on specific game settings and supported features across PC, STEAM, Android, iOS, and Apple Arcade.

Low Battery Protection Mechanism

The controller features a low battery protection mechanism. A low battery warning will cause the LED indicator to flash slowly. If the battery is critically low, the controller may enter a forced sleep mode. For optimal performance, charge the controller before it fully depletes. If the controller has been unused for a long time, charge it for 0.5-1 hour before use.

Charging and Interference Recommendations

• Charge using a charger with a specification of 5V/1-2A or lower to prevent short-circuiting.
• When wirelessly connected, avoid placing metal objects, thick walls, or strong Wi-Fi/Bluetooth devices nearby to minimize environmental interference and ensure stable connections.

FCC Caution and RF Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it must not cause harmful interference, and (2) it must accept any interference received. Unauthorized modifications may void the user's authority to operate the equipment.

This equipment has been tested and found to comply with Class B digital device limits, providing reasonable protection against harmful interference in residential installations. It generates, uses, and can radiate radio frequency energy. If interference occurs, try measures like reorienting the antenna, increasing separation, or connecting to a different circuit. Consult a dealer or technician for help.

FCC RF WARNING STATEMENT: The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.

Controller Features

TURBO Combo Function

How to Trigger: Press and hold the TURBO (T) button + press an action button (A/B/X/Y/R/L/ZR/ZL).

• Long Press Combo: Press and hold T + press action button once.
• Auto Combo: Press and hold T + press action button twice.

Note: While activating auto combo mode, pressing the combo action button again pauses/resumes the combo.

How to Stop Combo Mode:

• Long Press Combo: Press and hold T + press action button twice.
• Auto Combo: Press and hold T + press action button once.

Remove All Combo Functions: Press and hold the T button for 5 seconds.

Combo Frequency Levels: Press T + "+" to increase frequency, T + "-" to decrease. Levels: 5, 12, or 20 clicks per second.

Gaming Atmosphere Light Control

Joystick Ring Light Mode Control:

Press T button (back) + double-click L3 (Left Stick):

• First double-click: Activate breathing light mode.
• Second double-click: Turn off RGB lights.

Joystick Ring Light Brightness Adjustment:

Press T button (back) + hold down L3 (Left Stick). Adjustable brightness levels: 25%, 50%, 75%, 100%.

ABXY Button Light Control:

Press T button (back) + double-click R3 (Right Stick):

• First double-click: Activate breathing light mode.
• Second double-click: Turn off the light.

Button Memory | Macro Function

Single Button Setting (Copy):

1. Press and hold MR/ML button + press a single action button.
2. A vibration prompt indicates successful setting.
3. Press XR/XL button to trigger the memorized button action.

Macro Button Setting (Memorized):

1. Press and hold MR/ML button + press continuous action buttons.
2. A vibration prompt indicates successful setting.
3. Press XR/XL button to trigger the memorized multi-button action as a macro.

Notes:

• Up to 20 steps can be memorized for multi-button actions.
• Memorizable action buttons include A, B, X, Y, L, R, ZL, ZR, +, -, D-pad, and both joysticks.
• This function is available in SWITCH, Android, iOS, PC (wireless/wired), and XBOX modes.

Clearing Action Memory and Duplicating Buttons:

Press and hold the MR button, then release it to clear actions associated with the XR button. Press and hold the ML button, then release it to clear actions associated with the XL button.

Indicator Light Instructions

• Low Battery Reminder: LED indicator light flashes slowly during gameplay. Connection stability may be affected. Charge the device promptly.
• Charging Display: LED indicator light flashes.
• Charging Complete: LED indicator light remains on.
• Pairing Mode Display: Indicator light remains on when pairing is successful.
• Mode Indicators:
  • Xbox mode (Xinput): LED indicators 1 and 4 are on.
  • Switch mode (Dinput): LED indicators 2 and 3 are on.

Vibration Intensity Adjustment

Vibration Intensify (Left Back Button): Press and hold the left back button to increase motor vibration intensity.

Vibration Weaken (Right Back Button): Press and hold the right back button to decrease motor vibration intensity.

There are five intensity levels: 100%, 75%, 50%, 25%, and 0%. (Only applicable in SWITCH gameplay mode).

Item Model Specifications

Support

For a video tutorial, scan the QR code with your phone's camera or QR Code Scanner.