ZTE ZXHN F8648P XGS-PON ONT User Manual
Legal Information
Copyright © 2024 ZTE CORPORATION. This document is protected by copyright laws and international treaties. Reproduction or distribution of this document or any part thereof, in any form or by any means, without the prior written consent of ZTE CORPORATION, is prohibited. Furthermore, the content of this document is protected by confidentiality agreements. All company brands and product names are trademarks or registered trademarks of ZTE CORPORATION or their respective owners. This document is provided "as is", and all express, implied, or statutory warranties, representations, or conditions are disclaimed, including, without limitation, any implied warranty of merchantability, fitness for a particular purpose, title, or non-infringement. ZTE CORPORATION and its licensors shall not be liable for any damages arising from the use of or reliance on the information contained herein. ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications covering the subject matter of this document. Unless expressly provided in any written license between ZTE CORPORATION and the licensee, the user of this document shall not acquire any license to the content hereof. ZTE CORPORATION reserves the right to upgrade or make technical changes to this product without further notice. Users can visit ZTE's technical support website at http://support.zte.com.cn for related information. The final right of interpretation of this product belongs to ZTE CORPORATION.
1 Product Safety Instructions
Note Before using the device, please read the following safety information. ZTE is not responsible for the consequences resulting from the violation of safety instructions.
Safety Instructions for Use
- Read all safety instructions carefully before using the device.
- Use only the accessories included in the package, such as the power adapter.
- Do not extend the power cord, otherwise the device will not work.
- The power supply voltage must meet the device's input voltage requirements (voltage fluctuation should be less than 10%).
- Keep the socket clean and dry to avoid any risk of electric shock.
- Disconnect all cables during a storm to avoid damaging the device.
- Turn off and unplug the socket when the device is not in use for a long time.
- Do not attempt to open the device covers, otherwise there is a risk of damage or electric shock.
- Do not look directly into the optical port to avoid eye injury.
- Turn off and stop using the device under conditions such as abnormal sound, smoke, or strange odor. Contact the service provider for maintenance if the device is faulty.
Environmental Requirements
- Leave sufficient space for proper ventilation of the device to avoid any damage due to overheating. Avoid exposing the device to direct sunlight.
- Do not place objects on the device to avoid any damage.
- Do not place the device near a heat source. Do not place the device in humid or wet places. Do not spill liquids on the product.
- Keep the device away from household appliances with strong magnetic or electric fields, such as microwave ovens and refrigerators.
Cleaning Requirements
- Before cleaning, turn off the device and disconnect all cables connected to the device, such as the power cord, optical fiber, and Ethernet cable.
- Do not use liquid cleaners or sprays to clean the device. Use a soft, dry cleaning cloth.
Environmental Protection
- The equipment and the power adapter must be transported to designated collection points after their end of use.
- Comply with the recycling regulations for such equipment.
Restrictions in the 5 GHz band
According to Article 10 (10) of the European Directive 2014/53/EU, the packaging indicates that this radio equipment will be subject to certain restrictions when placed on the market in countries such as Belgium, Bulgaria, Czech Republic, Denmark, Germany, Estonia, Ireland, Greece, Spain, France, Croatia, Italy, Cyprus, Latvia, Lithuania, Luxembourg, Hungary, Malta, Netherlands, Austria, Poland, Portugal, Romania, Slovenia, Slovakia, Finland, Sweden, Turkey, Norway, Switzerland, Iceland, and Liechtenstein. WLAN operation for this device is restricted to indoor use only when operating in the 5150 MHz to 5350 MHz frequency range.
RF Exposure Information
The maximum permissible exposure level (MPE) is calculated based on a distance of 20 centimeters (d=20 cm) between the device and the human body. Therefore, during installation and operation, ensure that you maintain a distance of at least 20cm.
EU Declaration of Conformity
ZTE Corporation hereby declares that the radio equipment type ZXHN F8648P complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://support.zte.com.cn/support/cer/EU
2 Package Contents
Please ensure that the packaging of the ZXHN F8648P equipment contains the following items as listed in Table 2-1.
Table 2-1: Package Contents
| Name | Quantity |
|---|---|
| ZXHN F8648P Equipment | 1 |
| AC-DC Power Adapter | 1 |
| Ethernet Cable RJ-45 (CAT6) | 1 |
| Fiber Optic Cable SC/APC | 1 |
| Telephone Cable RJ-11 | 1 |
| User and Product Safety Manual | 1 |
Note The list is for reference only. Actual contents may vary from the list. If any of the items included in the package are damaged, please contact your service provider. If you need to replace the product, please keep the packaging and all items in good condition.
3 Indicator Lights
Figure 3-1 shows the indicator lights on the front panel of the ZXHN F8648P equipment.
Figure 3-1: Indicator Lights of the ZXHN F8648P Equipment
Front Panel Indicator Lights
| Indicator Light | Status | Description |
|---|---|---|
| Power | Off | The ZXHN F8648P is powered off. |
| Solid Green | The ZXHN F8648P is powered on. | |
| PON | Off | The ZXHN F8648P has not started the registration process, or the device is powered off. |
| Solid Green | The registration of the ZXHN F8648P is successful. | |
| Blinking Green (slow) | The ZXHN F8648P is in the registration process. | |
| Blinking Green (fast) | The ZXHN F8648P is in the upgrade process. | |
| LOS | Off | The received optical power of the ZXHN F8648P is normal, or the device is powered off. |
| Solid Red | Emergency Stop Status (O7). | |
| Blinking Red | The PON interface is not connected to the optical fiber. | |
| Internet | Off | The ZXHN F8648P is powered off, or there is no WAN connection with correctly configured Internet characteristics, or the connection has been disconnected at the user's request or by the remote part (PPP disconnected, DHCP released, or no available static IP address on the WAN connection Internet). |
| Solid Green | An IP is connected (the ONT has a WAN Internet IP address via IPCP, DHCP, or statically configured). | |
| VOIP | Off | The ZXHN F8648P is powered off, or the telephony connection is not available. |
| Solid Green | The telephony connection is available. | |
| Blinking Green | A call is in progress. | |
| Wi-Fi | Off | Wi-Fi is disabled. |
| Solid Green | Wi-Fi is enabled. | |
| WPS | Off | The ZXHN F8648P is powered off, or the WPS function is disabled or not in use. |
| Blinking Green | Enable the WPS function and program the device to connect to WPS as soon as possible. | |
| Blinking Red | WPS connection failed. |
4 Ports & Switches
Figure 4-1 shows the ports and switches on the rear panel of the ZXHN F8648P equipment.
Figure 4-1: Ports and Switches on the Rear Panel
Rear Panel Ports and Switches Description
| Ports/Switches | Description |
|---|---|
| Phone 1 / Phone2 | Two POTS ports with RJ-11 connectors. |
| 10G LAN | One Ethernet port 100M/1GE/2.5GE/10GE Base-T with RJ-45 connector. |
| LAN1 – LAN4 | Four Ethernet ports 10/100/1000Mbps Base-T with RJ-45 connectors. |
| USB | Standard USB 3.0 port, can connect to a USB storage device for file sharing, quick backup, and data recovery. |
| On/Off | Power switch. |
| Power | 12 V DC power input jack. |
| PON | SC/APC XGS-PON optical interface. |
| Reset | Reset button used when the device is in operation.
|
| WPS | WPS button. After pressing the WPS button for more than 0.4 seconds, the WPS function will be enabled. |
| Wi-Fi | Wi-Fi button. After a momentary press of the Wi-Fi button for no more than 0.4 seconds, the WLAN function will be enabled or disabled. |
5 Product Specifications
Interfaces
- PON Interface: XGS-PON standard, SC/APC, compliant with ITU G.984.1-G.984.5 standards.
- Ethernet Interface: One RJ-45 auto-sensing port 100M/1G/2.5G/5G/10G and four RJ-45 auto-sensing ports 10Mbps/100Mbps/1000Mbps compliant with IEEE 802.3 and IEEE 802.3u standards.
- WLAN Interface: Compliant with IEEE 802.11b/g/n/ax@2.4GHz and IEEE 802.11a/n/ac/ax@5GHz standards.
- Telephone Interface: Two POTS ports with RJ-11 connectors.
- USB Interface: Standard USB 3.0 port.
Technical Specifications
- Broadband Access: Connects to the Internet via the XGS-PON access method.
- Ethernet Access: Has Ethernet ports for connecting to devices that support Ethernet, such as a user's computer. Provides Internet and IPTV access.
- Telephone Access: Supports the SIP protocol.
- WLAN: Users can connect to the ZXHN F8648P device via WLAN.
- Data Sharing, Backup, and Restoration: Provides a USB 3.0 port for connecting to a USB storage device for file sharing, quick backup, and data recovery.
- Security: Provides multi-level device, user, and service-based authentication, as well as data channel encryption for security.
- QoS: Provides QoS services that meet the requirements of various services for both local devices and the network.
- Network Management: Provides multiple functions for network management.
6 Equipment Specifications
For the specifications of the ZXHN F8648P equipment, refer to Table 6-1.
Table 6-1: Equipment Specifications
| Technical Specifications | |
|---|---|
| Dimensions | 230 mm (W) x 215 mm (D) x 40 mm (H) |
| Certification | CE and Wi-Fi Certification |
| Power Adapter | Input Voltage - 100-240 V |
| Input AC frequency- 50/60 Hz | |
| Output Voltage- 12 V (DC) | |
| Output Current- 3.0 A | |
| Output power- 36 W | |
| Average active efficiency: 88.3 % Efficiency at low load (10%): 78.3 % No-load power consumption: 0.075 W | |
| Environmental Requirements | |
| Operating Temperature | 0 °C to 40 °C (32 °F to 104 °F) |
| Storage Temperature | −40 °C to 70 °C (−40 °F to 158 °F) |
| Operating/Storage Humidity | 5% - 95% |
| Wi-Fi Specifications | |
| Radio Frequencies | Maximum Transmit Power |
| Wi-Fi 2.4 GHz: 2400 MHz – 2483.5 MHz | EIRP: (19 ± 1) dBm |
| Wi-Fi 5 GHz: 5150 MHz – 5350 MHz | EIRP: (22 ± 1) dBm |
7 Equipment Connection
Figure 7-1 shows the devices that can be connected to the ZXHN F8648P equipment.
Figure 7-1: Connection Diagram
After connecting the devices to the ZXHN F8648P device, press the power button. When the corresponding indicator lights on the front panel are on, you can enjoy the various services provided by the service provider.
Factors affecting wireless network coverage include the product's placement, the distance between the product and a wireless terminal, the number of obstacles, the material and density of obstacles, and potential interference sources. It is recommended to place the product according to the following guidelines to maximize wireless signal strength.
- The equipment should be placed away from objects that affect wireless signal propagation, such as highly reflective objects, e.g., metal objects or mirrors.
- The equipment should be placed away from electrical appliances with strong magnetic or electric fields, such as microwave ovens, refrigerators, wireless routers, cordless phones, or Bluetooth products.
- The equipment should be installed on the same floor as the operating area.
- Do not place other objects on top of the equipment. Try to minimize the number of obstacles between the product and a wireless terminal.
- Place the equipment vertically, ideally in the center of the operating area, and do not place it in a corner.
- Do not place the equipment at a high position. The recommended height is 1.2 to 1.5 meters.
8 Troubleshooting
Power Indicator Light
The Power indicator light on the front panel is off after pressing the power button.
The power supply is not correctly connected to the device. Ensure you are using the power adapter provided with the device.
LOS Indicator Light
The LOS indicator light is blinking red or solid red after the device is powered on.
- The optical fiber is not correctly connected to the ONT's PON interface.
- The optical fiber is broken or damaged.
- If the indicator light is solid red or continuously blinking, please contact your service provider.
PON Indicator Light
The PON indicator light on the front panel is off or blinking green after the device is powered on.
- There is no XGS-PON connection.
- The ONT is not connected to the network.
- Please contact your service provider for assistance.
Phone Indicator Light
The Phone indicator light on the front panel is off after the device is powered on.
The phone function is not working correctly. Please contact your service provider for assistance.
Contact Information
Address: ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, P.R.China
Postal Code: 518057
Tel: +86-755-2677 1900
Website: http://support.zte.com.cn
Email: support@zte.com.cn
ZTE CERTIFICATION QC PASS
