Introduction
This document provides essential information for the safe and effective use of your Amazon Basics Fabric 3-Drawer Storage Organizer Unit. Please read these instructions carefully and keep them for future reference. If the product is transferred to a third party, these instructions must be included.
1. Important Safeguards
When using the product, basic safety precautions should always be followed to reduce the risk of injury, including the following:
A WARNING: Risk of injury or death!
Children have died from furniture tipover. To reduce the risk of furniture tipover:
- Always install the tipover restraint provided.
- Never put a TV on this product.
- Never allow children to stand, climb, or hang on drawers, doors, or shelves.
- Never open more than one drawer at a time.
- Place heaviest items in the lowest drawers.
For domestic use only.
- A competent adult must assemble this product.
- Keep children and pets away while assembling the product.
- Do not let children climb on or play with the product.
- Always use on a firm, level ground.
- Regularly verify that all components and fasteners (hardware) are secure.
- Do not use this product if any parts are missing, are damaged, or worn.
- To avoid scratching the floor, assemble the product on a soft surface, such as a carpet.
- Do not overtighten the fasteners (hardware).
- Regularly examine the product for wear and tear. Replace at first sign of damage or if parts become detached.
- It is mandatory to anchor the product to a wall using the provided tip over restraints.
IMPORTANT: RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
2. Before First Use
A DANGER: Risk of suffocation!
Keep any packaging materials away from children and pets – these materials are a potential source of danger, e.g. suffocation.
Check for transport damages.
3. Cleaning and Maintenance
3.1 Cleaning
To clean, wipe with a soft, slightly damp cloth.
Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.
3.2 Maintenance
- Check the components regularly to make sure all screws and bolts are tightened.
- Store in a cool and dry place away from children and pets, ideally in the original packaging.
- Avoid any vibrations and shocks.
4. Importer Information
For EU
Postal: Amazon EU S.à r.l., 38 avenue John F. Kennedy, L-1855 Luxembourg
Business Reg.: 134248
For UK
Postal: Amazon EU SARL, UK Branch, 1 Principal Place, Worship St, London EC2A 2FA, United Kingdom
Business Reg.: BR017427
5. Feedback and Help
We would love to hear your feedback. Please consider leaving a rating and review through your purchase orders. If you need help with your product, log in to your account and navigate to the customer service / contact us page.
Assembly Instructions
Tools Needed: Screwdriver, Drill (optional)
Delivery Content:
- Part A (x1)
- Part B (x1)
- Part C (x1)
- Part D (x3)
- Part E (x1)
- Part F (x4)
- Part G (x12) - 6.322 x 28.5 mm
- Part H (x1)
- Part I (x4)
- Part J1 (x1)
- Part J2 (x1) - 2.824 x 50 mm
- Part J3 (x2) - 10.5 x 41.57 mm
- Part J4 (x2)
- Part J5 (x1) - 2.824 x 16 mm
Step 1: Assembly
Attach Part B to Part A using Part G screws. Attach Part C to the structure using Part G screws. Attach Part E to the top of the structure using Part G screws. Ensure all connections are secure but do not fully tighten screws yet.
Step 2:
Attach Part A to the side panels using Part G screws. Attach Part F to the top of the unit using Part G screws.
Step 3:
Insert Part H through the pre-drilled holes and secure with Part I nuts. Repeat for all designated points. Use a screwdriver and wrench (if provided) to tighten.
Step 4: Securing to the Wall
For Concrete/Plasterboard Wall:
- Use Part J3 to drill a hole of approximately 1.57 inches (40 mm) deep.
- Insert Part J1 into the hole.
- Attach Part J2 to the wall using Part J4.
- Connect the unit to the wall using Part J1 and Part J4.
For Wooden Wall:
- Use Part J5 to secure the unit to the wall using Part J4.
- Use Part J1 to attach the bracket to the wall.
- Use Part J4 to secure the bracket.
Step 5: Inserting Drawers
Slide the assembled drawers (Part D) into the unit.
Step 6: Weight Limits
The top surface can support up to 44 lbs (20 kg).
Each drawer can support up to 17.6 lbs (8 kg).
Note: Do not overtighten screws during assembly. Ensure all parts are correctly aligned before final tightening.
