DOOGEE T30 Max User Manual

Device Overview

01: Speaker

02: SIM/TF Card

03: Fingerprint Sensor

04: Speaker

05: Power Button

06: Volume Button

07: Front Camera

08: Light Sensor

09: Microphone

10: Speaker

11: Type-C Port

12: Speaker

13: DOCKING Interface

14: Main Camera

15: Flash

16: Macro Camera

How to Insert the SIM Card

To ensure your tablet can make calls, insert the SIM card in the following order:

1. Press the card pin into the side hole, and the card tray will pop out. Pull it out.
2. Take out the card slot and place the Nano SIM card or TF card with the metal side facing down. Ensure the bevel angle aligns with the bevel angle of the card slot and is placed in the corresponding card slot.
3. With the tablet facing up, insert the card holder into the tablet in the direction of the arrow.

How to Boot the Device

Non-removable battery: Press the power button for 3-5 seconds to boot.

How to Send SMS, MMS

SMS

1. Open the SMS app.
2. Select "New Information".
3. Enter a phone number or browse your contacts.
4. Select "Edit Information" and enter your text.
5. Press "Send".

MMS - Video

1. When writing a text message, select images, videos, or other files you want to add. You can also take a new picture or video immediately.
2. Select and send.

Language Switching Settings

Main menu > Settings > System settings > Language and input method > Language > Add language.

Select the language you need. The system will automatically jump back to the language interface. Select the icon next to the language bar and drag it to the top position.

SAR (Specific Absorption Rate)

The maximum electromagnetic radiation absorption ratio (SAR) of this product is ≤2.0W/kg, in line with the requirements of the national standard GB 21288-2007.

Safety Precautions

To ensure safe use of the product, strictly adhere to the following rules:

• The tablet should be at least 15 cm away from any medical implant or heart rhythm adjuster. Never put the device in your coat pocket.
• Do not expose the device and batteries to high temperatures or heat-generating equipment (e.g., sunlight, heaters, microwave ovens, ovens, or water heaters). Overheating of the battery can cause an explosion.
• When charging is complete or not charging, disconnect the charger from the device and unplug it from the power outlet.
• If the device is equipped with a non-removable battery, do not attempt to replace it yourself to avoid damaging the battery or device.
• Using an unapproved or incompatible power source, charger, or battery may cause fire, explosion, or other hazards.
• Do not disassemble or reset the battery, insert foreign objects, or immerse it in water or other liquids to avoid battery leakage, overheating, fire, or explosion.
• Do not drop, crush, scratch, or puncture the battery to avoid subjecting it to excessive external pressure, which could lead to internal short-circuiting and overheating.
• The company is not responsible for accidents caused by non-standard charging equipment.

Maintenance

Thoroughly understand the maintenance of this tablet to use it more safely and effectively, and to extend its service life as much as possible.

• Follow the instructions in the manual to open the tablet and disassemble accessories. Do not attempt other methods.
• Avoid dropping, knocking, or shaking your tablet. Rough handling can cause screen cracks and damage to the internal circuit board and delicate structure.
• Do not use chemical solvents or detergents to clean your tablet. Wipe the tablet case with a soft cotton cloth dampened with water or mild soap.
• Clean the lens (e.g., camera lens) and display with a clean, dry, soft cloth.
• If you encounter an abnormal situation, such as a crash during use: For a tablet with a non-removable battery, press and hold the power button for more than 12 seconds to force a restart (unlock the tablet upon restart). This can solve general bugs. For tablets with a removable battery, remove the battery, then reinsert it and restart the device to fix the bug.
• When the charger is not in use, unplug it from the power outlet. Do not connect a fully charged battery to the charger for extended periods, as overcharging can shorten battery life.

FCC Compliance

FCC 15.19

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC 15.21

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC 15.105

For a Class B digital device or peripheral, the instructions furnished to the user shall include the following or similar statement, placed in a prominent location in the text of the manual:

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Specific Absorption Rate (SAR) Information

This Tablet meets the government's requirements for exposure to radio waves. The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age or health.

FCC RF Exposure Information and Statement: The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Tablet (FCC ID: 2AX4YT30MAX) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification is 1.489W/kg when properly worn on the body. This device was tested for typical body-worn operations with the back of the Smart Phone kept 00mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 00cm separation distance between the user's body and the back of the Tablet. The use of belt clips, holsters, and similar accessories should not contain metallic components in their assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided.

Very high volume, prolonged listening to a mobile phone can damage your hearing.

Low Blue Light Mode

Steps for entering low blue light mode:

1. Pull down the menu bar and select "Eye Comfort Mode".
2. Go to Settings > Display > Eye Comfort Mode.

Suggestions for healthy use of users:

1. Do not use the device for a long time without interruption. Take a 5-10 minute break every 20-30 minutes.
2. When resting, look into the distance for a while to relieve visual fatigue.
3. When resting, do eye exercises to relax.

Function of low blue light mode:

With the increasing popularity of digital products, people spend a lot of time looking at various display screens (mobile phones, computers, tablets, etc.) every day. Today's LCD mainly relies on blue light or ultraviolet light to excite phosphor to emit light, so we will inevitably be exposed to blue light or ultraviolet light radiation. Looking at the LCD screen for a long time can not only cause visual fatigue but also eye diseases, such as retinal inflammation and color discrimination. Enabling low blue light mode can reduce the blue light radiation ratio of mobile phones and tablets, reduce screen brightness, and lower the screen color temperature (making the screen appear yellow). The total energy and peak energy of the blue light band are suppressed, thereby reducing the damage of harmful blue light radiation to eye health.