Bosch Refrigerator Installation Guide and Assembly Instructions

Section 1: General Assembly Instructions

Step 1.1: Initial Setup and Warning

Diagram Description: A warning symbol (!), an illustration of the appliance, and a specific tool (Torx 20) are shown. Text indicates a warning. Action: Ensure correct installation procedures are followed. Use a Torx 20 screwdriver for assembly.

Step 1.2: Appliance Positioning

Diagram Description: The appliance is shown being moved into position. Arrows indicate the direction of movement. The diagram also shows 90° angles. Action: Position the appliance correctly. Ensure 90° clearance on both sides for optimal ventilation and access.

Step 1.3: Shelf Installation

Diagram Description: A shelf component (labeled '2') is depicted being slid into place on runners (labeled '3'). Action: Slide shelf component 2 into the designated runners 3.

Step 1.4: Component Attachment

Diagram Description: A component (labeled '7') is shown being attached to the appliance structure using screws (labeled '1'). Action: Attach component 7 using screws 1.

Step 1.5: Internal Component Insertion

Diagram Description: An internal component, possibly a drawer or shelf support (labeled '5'), is shown being inserted into its housing. Action: Insert internal component 5 into its designated housing.

Step 1.6: Frame Assembly

Diagram Description: Multiple parts (labeled '9', '10', '11', '12') are shown being assembled, likely forming a frame or support structure. Action: Assemble the frame or support structure using parts 9, 10, 11, and 12.

Step 1.7: Final Component Insertion

Diagram Description: A component (labeled '6') is shown being fully inserted into the assembly. Action: Complete the insertion of component 6 into the assembly.

Step 1.8: Stability Check and Securing

Diagram Description: A warning symbol (!), an illustration of the appliance, and a tool are shown. Action: Warning: Ensure the appliance is stable. Use appropriate tools for securing it in place.

Step 1.9: Connecting Multiple Components

Diagram Description: Various components, labeled '13' through '22', are shown being connected to each other and the appliance. Action: Connect components 13 through 22 as illustrated, ensuring proper alignment and secure fitting.

Step 1.10: Placing Component 23

Diagram Description: Component 23 is shown being placed. Action: Place component 23.

Step 1.11: Attaching Components 24-27

Diagram Description: Components labeled '24', '25', '26', and '27' are shown being attached to the appliance body. Action: Attach parts 24, 25, 26, and 27 to the appliance body.

Step 1.12: Securing Component 28

Diagram Description: Component 28 is shown being secured with screws. Action: Secure component 28 with screws.

Step 1.13: Assembling Components 29-32

Diagram Description: Components labeled '29', '30', '31', and '32' are shown being assembled. Action: Assemble parts 29, 30, 31, and 32.

Step 1.14: Attaching Component 33

Diagram Description: Component 33 is shown being attached. Action: Attach component 33.

Step 1.15: Assembling Components 34-36

Diagram Description: Components labeled '34', '35', and '36' are shown being assembled. Action: Assemble parts 34, 35, and 36.

Step 1.16: Attaching Component 37

Diagram Description: Component 37 is shown being attached to the appliance using screws. Action: Attach component 37 with screws.

Step 1.17: Assembling Components 38-43

Diagram Description: Components labeled '38' through '43' are shown being assembled. Action: Assemble parts 38, 39, 40, 41, 42, and 43.

Step 1.18: Attaching Component 44

Diagram Description: Component 44 is shown being attached using screw 45. Action: Attach component 44 using screw 45.

Step 1.19: Assembling Components 46-48

Diagram Description: Components labeled '46', '47', and '48' are shown being assembled. Action: Assemble parts 46, 47, and 48.

Step 1.20: Attaching Component 49

Diagram Description: Component 49 is shown being attached. Action: Attach component 49.

Step 1.21: Assembling Components 50-52

Diagram Description: Components labeled '50', '51', and '52' are shown being assembled. Action: Assemble parts 50, 51, and 52.

Step 1.22: Attaching Component 53

Diagram Description: Component 53 is shown being attached. Action: Attach component 53.

Step 1.23: Assembling Components 54-58

Diagram Description: Components labeled '54' through '58' are shown being assembled. Action: Assemble parts 54, 55, 56, 57, and 58.

Step 1.24: Assembling Components 59-62

Diagram Description: Components labeled '59' through '62' are shown being assembled. Action: Assemble parts 59, 60, 61, and 62.

Step 1.25: Attaching Component

Diagram Description: A component is shown being attached. Action: Attach the component.

Step 1.26: Attaching Component

Diagram Description: A component is shown being attached. Action: Attach the component.

Step 1.27: Attaching Component

Diagram Description: A component is shown being attached. Action: Attach the component.

Step 1.28: Assembling Components 63-64

Diagram Description: Components labeled '63' and '64' are shown being assembled. Action: Assemble parts 63 and 64.

Step 1.29: Attaching Component 65

Diagram Description: Component 65 is shown being attached. Action: Attach component 65.

Step 1.30: Assembling Components 66-68

Diagram Description: Components labeled '66', '67', and '68' are shown being assembled. Action: Assemble parts 66, 67, and 68.

Step 1.31: Final Component Attachment and Warning

Diagram Description: A warning symbol (!), an illustration of the appliance, and component 69 are shown. Action: Warning: Ensure correct positioning. Attach component 69.

Section 2: Door Mounting

Step 2.1: Attaching the Door

Diagram Description: The appliance door is shown being attached to the appliance body using a hinge mechanism. Action: Attach the door to the appliance body using the provided hinge mechanism.

Step 2.2: Door Adjustment

Diagram Description: Adjustment screws (labeled '1', '2', '3', '4') are shown on the hinges. Action: Adjust door alignment using screws 1, 2, 3, and 4 on the hinges.

Step 2.3: Testing Door Operation

Diagram Description: The door is shown opening and closing. Action: Test the door opening and closing mechanism to ensure smooth operation.

Step 2.4: Final Door Alignment Check

Diagram Description: The door is shown in its final aligned position. Action: Ensure the door is properly aligned and seals correctly when closed.

Section 3: Water Connection / Special Features

Step 3A: Feature/Connectivity Check

Diagram Description: A symbol indicating no Wi-Fi signal and a cloud with a question mark are shown. Action: This step may relate to connectivity or troubleshooting a specific feature. [No Wi-Fi signal] [Uncertainty/Troubleshooting].

Step 3B.1: Connecting Water Supply Components

Diagram Description: Components labeled '3', '4', '5', '6', and '7' are shown being connected, likely for a water supply line. Action: Connect water supply components 3, 4, 5, 6, and 7 as illustrated.

Step 3B.2: Water Line Connection Length

Diagram Description: A water line connection is shown with a measurement indicated as "ca. 100 cm". Action: Connect the water line, ensuring approximately 100 cm of slack for proper installation.

Step 3B.3: Completing Water Connection

Diagram Description: The final water connection is depicted. Action: Complete the water connection.

Section 4: Final Checks and Adjustments

Step 4.1: Leveling the Appliance

Diagram Description: The appliance is shown being leveled using adjustable feet (labeled '4'). A measurement indicates "0 mm" gap at the bottom front. A warning symbol (!) is present. Action: Warning: Ensure the appliance is level. Adjust feet 4 to achieve a 0 mm gap at the bottom front.

Step 4.2: Positioning the Appliance

Diagram Description: The appliance is shown being pushed into its final position. Action: Carefully push the appliance into its final position.

Step 4.3: Stability and Alignment Check

Diagram Description: A warning symbol (!), a checkmark symbol, and an 'X' symbol are shown, indicating checks for stability and alignment. Action: Warning: Check for stability and correct door alignment. Ensure the appliance is not tilted.

Step 4.4: Tilting for Stability

Diagram Description: The appliance is shown being tilted slightly backwards. Action: Slightly tilt the appliance backwards for enhanced stability.

Step 4.5: Leveling with Gap Measurement

Diagram Description: The appliance is shown being leveled with adjustable feet. A measurement indicates "> 0 mm" gap at the bottom front. A warning symbol (!) is present. Action: Warning: Ensure the appliance is level. Adjust feet to achieve a gap greater than 0 mm at the bottom front.

Step 4.6: Final Appliance Check

Diagram Description: The appliance is shown in its final installed position. Action: Perform a final check of the appliance's stability and door operation.