mark-10.com/manualm3mark-10.com/manualm5mark-10.com/manualmeOne moment, please...
Instruction Manual for MARK-10 models including: Series EK3, Series EKE, Series EKM5, EK3 Series Myometer Kit, EK3 Series, Myometer Kit, Kit
Myometer Kit - Series EKM5 - Mark-10
Ergonomics Kit Muscle Strength Tester - Series E - Mark-10
Ergonomics Kits - Series EK3 - Mark-10
File Info : application/pdf, 2 Pages, 870.92KB
DocumentDocumentMounting to a table Attach the M5-200 force gauge to the tabletop mounting kit using the four supplied thumb screws. Then, slide the mounting kit to a table and tighten the knob sufficiently to withstand up to 200 lbF / 1,000 N of force. Fasten the snap hook to the load cell shaft of the force gauge, then attach the strap. INSTALLING MESUR® SOFTWARE MESUR® Lite Free basic data acquisition application, for data tabulation and exporting to Excel. Compatible with gauges only, not test stands. MESUR®gauge Data tabulation, graphing, analysis, and reporting, with user-configurable start and stop triggers and other tools. Free 90-day evaluation period. PC requirements Compatible with PCs running Microsoft Windows 7 or later, with minimum monitor resolution of 1108 x 758. A USB or RS-232C serial port is required. If USB communication is required, install the Mark-10 USB driver. Installation instructions may be found in the applications' user's guide. A download link is provided below. USER'S GUIDES LINKS Series 3 force gauges mark-10.com/manualm3 Series 5 force gauges mark-10.com/manualm5 Series E force gauges mark-10.com/manualme Download user's guides, data sheets, software, solid models, and more. mark-10.com/resources 11 Dixon Avenue, Copiague, NY 11726 888-MARK-TEN Tel: 631-842-9200 www.mark-10.com info@mark-10.com 32-1261 0123 Ergonomics / Strength Assessment Kits Series EK3 / Series EKE / Series EKM5 QUICK START GUIDE Thank you! Thank you for purchasing a Mark-10 ergonomics / strength assessment kit. Please read through this quick start guide and the complete force gauge user's guide before use. IMPORTANT SAFETY CONSIDERATIONS Force gauges are sensitive instruments that must be treated with care. Please review the yellow safety information card included in the box, as well as the safety information provided in the user's guide prior to operating the gauge. POWER Press the button to power on the gauge. Press and hold to power off. The gauge is powered either by the internal rechargeable battery or an AC adapter/charger. The battery will last approximately 7 hours with the backlight turned on, and 24 hours with the backlight turned off before recharging is necessary. INCLUDED ITEMS - SERIES EK3 Qty. Part No. Description 1 M3-100 Force gauge, 100 lbF / 50 kgF / 500 N 1 M3-200 Force gauge, 200 lbF / 100 kgF / 1000 N 1 M3-500 Force gauge, 500 lbF / 250 kgF / 2500 N 1 AC1030 / AC1031 / AC1032 / AC1035 AC adapter with US, EU, UK, or AUS prong 1 AC1118 Battery (inside the gauge) 1 AC1111 USB cable, type micro B to A 4 10-1023 Thumb screw, #6-32 x 1/2 1 10-1021 Hex jam nut, #10-32 1 10-1108 Hex jam nut, 5/16-18 1 AC1003 Double-handle grip 1 AC1003-1 Single-handle grip 1 G1019 Padded attachment, square 1 G1020 Padded attachment, rectangular 1 G1021 Padded attachment, curved 1 G1029 Flat attachment, #10-32F 1 G1036 Flat attachment, 5/16-18F 1 G1112 Padded attachment, circular 1 12-1032 Carrying case, large EK3-100 - EK3-200 - EK3-500 - - - - 1 Ergonomics / Strength Assessment Kits INCLUDED ITEMS - SERIES EKE Qty. Part No. Description 1 ME-100 Ergonomics force gauge, 100 lbF 1 ME-200 Ergonomics force gauge, 200 lbF 1 ME-500 Ergonomics force gauge, 500 lbF AC1030 / 1 AC1031 / AC adapter with US, EU, UK, or AC1032 / AUS prong AC1035 1 AC1118 Battery (inside the gauge) 1 AC1111 USB cable, type micro B to A 4 10-1023 Thumb screw, #6-32 1 E1002 Padded attachment, square 1 E1003 Padded attachment, rectangular 1 E1004 Padded attachment, curved 1 E1005 Padded attachment, circular 1 E1006 Snap hook 1 E1007 Chain / hook assembly 1 E1008 Single-handle grip 1 E1009 Double-handle grip 1 E1010 Pistol grip 1 E1000 Carrying case 1 E1001 Carrying case, large Advanced Kits -100-1 -200-1 -500-1 - - - - - - Professional Kits -100-2 -200-2 -500-2 - - - - - - - - - - - - - INCLUDED ITEMS - SERIES EKM5 Qty. Part No. 1 M5-200 4 10-1023 1- 1- 1 G1107 1 AC1030 / AC1031 / AC1032 / AC1035 1 AC1111 1 12-1032 1- Description Force gauge, 200 lbF / 100 kgF / 1,000 N Thumb screw, #6-32 x 1/2 Tabletop mounting kit for force gauge Adjustable length looped strap Snap hook AC adapter with US, EU, UK, or AUS prong USB cable, type micro B to A Carrying case Certificate of calibration Quick Start Guide INSTALLING ACCESSORIES - SERIES EK3 Double- and Single-Handle Grips Attach the force gauge to the double-handle grip (AC1003) or single handle grip (AC1003-1) by mating the male dowel pin in the cradle to the corresponding hole in the rear of the force gauge housing. Then, fasten the gauge to the cradle with four included thumb screws (10-1023). Attachments Attachments G1019, G1020, G1021, G1029, G1036, and G1112 thread onto the load cell shaft of the Series 3 force gauge. Fasten the attachment onto the shaft, as shown at left. Do not overtighten the attachment, or load cell damage can occur! The attachments may freely rotate on the shaft, thereby self-adjusting to the shape of an object. However, if a fixed position is desired, use an included jam nut, as follows: 1. Rotate the jam nut as high as possible up the load cell shaft. 2. Rotate the attachment up to the jam nut, then back off until the desired position. Tighten the nut against the attachment. Friction between the nut and attachment body will prevent the attachment from loosening, as shown at left. INSTALLING ACCESSORIES - SERIES EKE Double- and Single-Handle Grips Attach the force gauge to the double-handle grip (E1009) or single-handle grip (E1008) by mating the male dowel pin in the cradle to the corresponding hole in the rear of the force gauge housing. Then, fasten the gauge to the cradle with four included thumb screws (10-1023). Attachments Ergonomics attachments mount to the gauge's receptacle via the Click-Lock® mechanism. Line up the attachment with the receptacle and press until a click occurs. The attachment may be inserted in 90° or 180° orientations as shown below. To release the the attachment, pull back on the release tab in the rear of the housing, as shown below: 2 3