SOLTECH BROADWAY 10W/20W Billboard Lights Installation Manual
Introduction
Thank you for purchasing BROADWAY Urban Lighting Products.
Important: Please read these instructions before installation to ensure optimum results and longevity of your lights. The solar panel should be charged in full sunlight for 8 to 9 hours before initial first use to provide optimum results.
Features
- Easy Installation: No electrical wiring is required with its integrated design.
- Automatic Operation: Turns on automatically at night and off during the day.
- Integrated Battery: The lights include an ON / OFF switch and a built-in battery.
- Extended Run Time: Battery can support 2-3 nights with cloudy days once fully charged.
- Intelligent Power Saving: Intelligent power saving mode increases lighting x1.5 times.
- Durability: IP65 water and dust resistance.
How The Solar Panel Works
During the day, the solar panel converts sunlight into electricity to charge the battery. At night, the lights turn ON automatically using the electricity stored in the battery. The performance of the solar light depends on the location of the solar panel and weather conditions. Install the solar panel in a sunny location to ensure it receives 6-8 hours of sunlight each day. Reduced sunlight will reduce continuous working hours at night.
Please Note: During continuous rainy or cloudy days, run time may be reduced as the battery will not be fully charged.
Product Dimensions
BROADWAY 10W: Length: 25.7 inches, Height: 4.9 inches, Width: 7.6 inches.
BROADWAY 20W: Length: 48.6 inches, Height: 4.9 inches, Width: 7.6 inches.
Additional component dimensions are provided for mounting brackets and related parts, including lengths of 24.4 inches, 47.0 inches, 12.4 inches, 7.6 inches, 3.8 inches, 3.0 inches, and heights/widths of 4.9 inches, 7.6 inches, 3.8 inches, 3.0 inches, 2.4 inches.
Specifications
| Specifications | BROADWAY 10W | BROADWAY 20W |
|---|---|---|
| LED Nominal Power | 10W | 20W |
| Solar Panel | 5.5V 8W polycrystalline | 5.5V 17W polycrystalline |
| Lithium Ion Battery | 3.7V 17.6AH | 3.7V 35.2AH |
| CCT | 4,000K, 5,000K | 4,000K, 5,000K |
| Lumen Output@5000K | 1,000 | 2,000 |
| CRI | > 70 | > 70 |
| LED Chip | OSRAM | OSRAM |
| EPA | 1.05 | 2.1 |
| Beam Angle | 120° | 120° |
| Waterproof Rate | IP65 | IP65 |
| Casting | PC & Aluminum | PC & Aluminum |
| Efficiency@5000K | 100 lm/W | 100 lm/W |
| * Charging Time | 8-10 hrs (1000W/m²) | 8-10 hrs (1000W/m²) |
| Run Time (@Full Power) | 2-3 Days | 2-3 Days |
| Operation Mode | First 4 hours 100% brightness, 25% brightness till dawn | First 4 hours 100% brightness, 25% brightness till dawn |
| * Operating Temperature | -4 °F to 149 °F | -4 °F to 149 °F |
| * Charging Temperature | 32 °F to 113°F | 32 °F to 113°F |
* The temperature can impact the battery's charging and normal operation. The solar charge time data is based on 77°F ambient temperature with the panel pointed directly at the solar radiation. The standard radiation value is 1000W/m².
Installation
Wall Mount
This mounting method is typically used for standard billboards alongside expressways. The Triangle Mount is versatile and can be installed on more traditional signage, as well as for commercial establishments and buildings.
Diagram Description: Visuals show a wall mount bracket being attached to a wall, followed by the light fixture being secured to the bracket.
Long Arm Mount
This mounting method is specifically for installing the BROADWAY 10W model. For the BROADWAY 20W, three Long Arm Mounts are required, whereas the BROADWAY 10W requires two. These accessories are not included in the standard packaging and must be requested from a SOLTECH sales representative.
For thinner billboards, the Long Arm mount utilizes a tighten-to-grip system to securely position the Broadway light. This is ideal for temporary signs needing illumination for shorter durations. The maximum billboard thickness accommodated by this mount is 2.5 inches.
Diagram Description: Visuals illustrate the Long Arm Mount being attached to a wall, and then the light fixture being secured to the mount.
Luminous Distribution
BROADWAY 10W: Polar chart showing light intensity distribution. Maximum intensity recorded at 121,770 cd/klm.
BROADWAY 20W: Polar chart showing light intensity distribution. Maximum intensity recorded at 319,700 cd/klm.
Warranty
The BROADWAY product is covered by a 3-year limited warranty. SOLTECH warrants to the original purchaser that this product is free from defects in materials and workmanship for a period of 3 years from the date of purchase. To obtain warranty service, please contact your local distributor or sales representative for further instructions.
About SOLTECH
SOLTECH Designs and Manufactures Advanced, Solar-Powered LED Technology.
Contact Information:
1460 Park Avenue.
Emeryville, CA 94608 USA
www.soltechlighting.com
SOLTECH LLC reserves the right to update all product data sheets at any time. For publication updates, please consult SOLTECH marketing specialists at hello@soltechlighting.com.
Copyright © 2022-2023 SOLTECH LLC, All Rights Reserved.
