Side Doors for Garages

Single-leaf side doors with corner frame

Fitting dimensions

Handing for single-leaf door sets

Standard sizes with steel infill and on-site infill doors are supplied for external fitting as standard. For standard sizes, internal fitting is possible by reversing the hinges.

Special sizes according to specifications.
Dual handed, depending on the style.
Styles with timber infill only available for external fitting.

Single-leaf side door with corner frame

Position of anchors: A diagram shows a vertical door frame with anchor points. Dimensions indicate 250 mm from the edge to the first anchor, and 75 mm between subsequent anchor points.

Without threshold: A diagram illustrates the door frame installed without a threshold. It details various height and width measurements, including Overall Frame Height (RAMH), Clear Passage Height (LDH), Structural Opening Height (LMH), Ordering Size Height (BMH), related to Nominal Size Height (BRH). It also shows Overall Frame Width (RAMB), Clear Passage Width (LDB), Structural Opening Width (LMB), Ordering Size Width (BMB), Nominal Size Width (BRB), and Finished Floor Level (OFF).

With threshold: A diagram shows the door frame installed with a threshold. Similar height and width measurements are indicated as in the 'Without threshold' view, with potential adjustments for the threshold.

Frame for single-leaf door set

A diagram shows a cross-section of the door frame, indicating a viewed width of 32.5 mm.

External fitting - opening outwards

A diagram depicts the door frame mounted on a wall, with the door designed to open outwards. It shows dimensions relating frame sizes (RAMB, RAMH) to ordering sizes (BRB, BRH) and structural openings (LMB, LMH). The diagram also indicates the exterior dimension (AUSS) and the finished floor level (OFF).

Internal fitting - opening inwards

A diagram illustrates the door frame mounted on a wall, with the door designed to open inwards. It displays similar dimensional relationships as the external fitting diagram, showing exterior dimension (AUSS) and finished floor level (OFF).

Handing

Left-hand hinged: A diagram indicates the hinge placement for a left-hand opening door.

Right-hand hinged: A diagram indicates the hinge placement for a right-hand opening door.

Note

When doors are fitted on the inside, the threshold angle or transport angle must be removed to ensure water run-off to the outside. Doors on the weather side are preferably fitted externally.

The clear passage width is reduced if the opening angle is less than 180°.

Dimension Legend

Abbreviation	Description
AUSS	Exterior
BMB	Ordering size width
BMH	Ordering size height
BRB	Nominal size width
BRH	Nominal size height
LDB	Clear passage width
LDH	Clear passage height
LI	Left
LMB	Structural opening width
LMH	Structural opening height
OFF	Finished floor level
OW	Opening angle
RAMB	Overall frame width
RAMH	Overall frame dimension height
RE	Right
RSL	Rain canopy

	Hörmann Side Sliding Sectional Doors: Space-Saving and Stylish Discover Hörmann's innovative side sliding sectional doors, a space-saving alternative to doors with a swing leaf. Explore various designs, finishes like Woodgrain and Silkgrain, and smart features for modern homes.
	Hormann Steel Doors: Planning, Fitting, Operation, and Maintenance Guide Comprehensive guide for Hormann steel doors (OD, H3G, H3VM, H16G, HS75, H16S1) covering planning, installation, safety, features (fire, smoke, acoustic, burglar protection), maintenance, and disposal. Includes technical specifications and wall compatibility tables.
	Hörmann Series 2000 Garage Doors - Style Selector Explore the Hörmann Series 2000 garage doors, featuring superior design and engineering excellence. This guide details automatic sectional doors, up-and-over doors, roller doors, and accessories, with various styles, finishes, and colors.
	Hörmann Rolling Shutters and Rolling Grilles - Product Information Discover Hörmann's range of rolling shutters and rolling grilles, featuring innovative tension spring assembly, easy manual operation, high safety, and long service life. Explore solutions for shopping centers, logistics, and commercial buildings.
	HÖRMANN M4.1 Steel Doors: Planning, Fitting, Operating, and Maintenance Guide Comprehensive guide for HÖRMANN M4.1 single-leaf and double-leaf steel doors (H60 OD, H120 OD). Covers planning, fitting, operation, maintenance, and safety instructions.
	Hörmann Residential Internal Doors: BaseLine Series - Quality, Design & Durability Explore the Hörmann BaseLine series of residential internal doors. Discover quality timber doors with various styles, finishes, and fittings, designed for durability and modern living. Learn about sustainability and technical specifications.
	Hörmann RenoMatic Sectional Garage Doors & NT 60 Side Doors - Product Catalog 2025 Discover the Hörmann RenoMatic sectional garage doors and NT 60 side doors. This catalog details product descriptions, available Woodgrain and Planar finishes, color options, sizes, optional extras, and garage door operator specifications. Learn about Hörmann's dedication to green initiatives.
	Hörmann Garage Door Fitting Guide: Solutions and Installation A comprehensive guide to Hörmann garage door fitting solutions, detailing various installation types, dimensions, track applications, and accessories for optimal performance and aesthetics in new construction and modernization projects.