Installation Manual-MEAN WELL Switching Power Supply ManufacturerGlobal Trade Item Number (GTIN)-MEAN WELL Switching Power Supply Manufacturer
User Guide for MEAN WELL models including: XLC-60-MAS, XLC-60-MA, XLC-60-MA 60W Multiple Stage Constant Power Constant Voltage LED Driver, XLC-60-MA, 60W Multiple Stage Constant Power Constant Voltage LED Driver, Constant Power Constant Voltage LED Driver, Constant Voltage LED Driver, Voltage LED Driver, LED Driver, Driver
File Info : application/pdf, 9 Pages, 197.28KB
DocumentDocumentXLC-60-MA 60W Multiple-Stage Constant Power/Constant Voltage LED Driver series User's Manual XLC-60-MAS Series (Independent type) XLC-60-MA Series (Built-in type) 110 for XLC-60 MAS series M M EL DC Input: 176-280 VDC SELV Note.8 Features Constant power mode output with multiple stage selectable by DIP switch (H-type) Constant voltage mode output(12/24/48V) Plastic housing with class and PFC design Flicker free, complying with CE ErP directive Standby power consumption <0.5W Meet emergency lighting (EL) application Minimum dimming level 0.1% (12/24/48V) Minimum dimming level 0.5% (H-type) Matter over thread, Matter 1.3 specification 5 years warranty Applications Recessed Light Down Light Panel Light Commercial Lighting Decorative Lighting LED strip lighting Matter wireless Lighting GTIN CODE MW Search: https://www.meanwell.com/serviceGTIN.aspx Description XLC-60-MA series is a 60W with constant power and constant voltage output LED driver . It can operate from 100~305V AC and output current ranging between 900 mA to 1700 mA selectable by DIP switch. Thanks to high efficiency up to 90%, it is able to operate for -25~90 case temperature under free air convection. XLC-60-MA series is designed based on latest safety regulations with matter wireless dimming.It provides more flexibility for LED Lighting application. Model Encoding XLC - 60 - - MA Blank: without strain-relief (Built-in type) Casing type: S: with strain-relief (Independent type) Function options: Matter wireless dimming Rated output voltage (12/24/48V or H-type) Rated wattage Series name Type MA MAS Function Note H type output current selectable by DIP switch, without strain-relief(Built-in type) 12, 24, 48V Constant voltage output, without strain-relief(Built-in type) In stock H type output current selectable by DIP switch, with strain-relief(Independent type) In stock 12, 24, 48V Constant voltage output, with strain-relief(Independent type) File Name:XLC-60-MA-SPEC 2025-02-24 60W Constant Voltage LED Driver XLC-60-MA series SPECIFICATION MODEL XLC-60 -12-MA XLC-60-24-MA XLC-60-48-MA OUTPUT DC VOLTAGE DEFAULT CURRENT RATED POWER SETUP,RISE TIME VOLTAGE RANGE 12V 24V 5A 2.5A Note.2 60W 60W Note.3 2500ms,180ms/230VAC ,2500ms,180ms/115VAC 100~305VAC 155~400VDC 48V 1.25A 60W INPUT FREQUENCY RANGE POWER FACTOR TOTAL HARMONIC DISTORTION EFFICIENCY(Typ.) AC CURRENT INRUSH CURRENT 47 ~ 63Hz PF0.95/115VAC, PF0.95/230VAC, PF0.9/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) THD< 20%(@load 60%/230VAC; @load 75%/277VAC); THD<10%@load 100%/230VAC (Please refer to "TOTAL HARMONIC DISTORTION(THD)" section) 86% 87% 88% 0.75A/115VAC, 0.35A/230VAC, 0.3A/277VAC COLD START 15A(twidth=310s measured at 50% Ipeak) at 230VAC; Per NEMA 410 MAX. NO. of PSUs on 16A CIRCUIT BREAKER LEAKAGE CURRENT 25 units (circuit breaker of type B) / 36 units (circuit breaker of type C) at 230VAC <0.75mA / 277VAC STANDBY POWER CONSUMPTION OVERLOAD Note.4 Standby power consumption<0.5W (Dimming OFF) 105~200% rated output power Protection type: Hiccup mode, recovers automatically after fault condition is removed. SHORT CIRCUIT PROTECTION OVER VOLTAGE Hiccup mode, recovers automatically after fault condition is removed 14~17V 26~35V Shut down output voltage, re-power on to recover 52~63V OVER TEMPERATURE WORKING TEMP. MAX. CASE TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP.,HUMIDITY TEMP. COEFFICIENT VIBRATION Shut down output voltage, recovers automatically after fault condition is removed Tcase=-25~90 (Please refer to " OUTPUT LOAD vs TEMPERATURE" section) Tcase=90 20 ~ 90% RH non-condensing -40 ~ +80, 10 ~ 95% RH ±0.03%/ (0 ~ 50) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13(EL) appendix J suitable for emergency installations (DC input 176-280VDC); BS EN/EN62384 , GB/T 19510.1, GB/T 19510.213, EAC TP TC 004 approved; Design refer to AS/NZS 61347-1, AS/NZS 61347-2-13 I/P-O/P: 3.75KVAC I/P-O/P: >100M Ohms / 500VDC / 25/ 70% RH Parameter Standard Test Level/Note EMC EMISSION Conducted Radiated BS EN/EN55015(CISPR15) ,GB/T 17743 ----- BS EN/EN55015(CISPR15) ,GB/T 17743 ----- SAFETY & EMC Harmonic Current Voltage Flicker BS EN/EN61547 Parameter BS EN/EN61000-3-2 , GB17625.1 BS EN/EN61000-3-3 Standard Class C @load60% ----- Test Level/Note EMC IMMUNITY ESD Radiated EFT/Burst Surge Conducted Magnetic Field Voltage Dips and Interruptions BS EN/EN61000-4-2 BS EN/EN61000-4-3 BS EN/EN61000-4-4 BS EN/EN61000-4-5 BS EN/EN61000-4-6 BS EN/EN61000-4-8 BS EN/EN61000-4-11 Level 3, 8KV air ; Level 2, 4KV contact Level 2 Level 2 Level 3, 1KV/Line-Line Level 2 Level 2 70% residual voltage for 10 period, 0% residual voltage for 0.5 periods OTHERS MATTER STANDARD FLICKER MTBF DIMENSION PACKING Matter 1.3 Specification Note.7 PstLM 1, SVM 0.4 4130.5K hrs min. Telcordia SR-332 (Bellcore) 317.7Khrs min. MIL-HDBK-217F (25) 176*45*32mm , 136*45*32mm (L*W*H) 0.32Kg; 40pcs/13.8Kg/0.48CUFT(for Blank type); 0.39Kg; 40pcs/16.6Kg/0.61CUFT(for S-type); NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25 of ambient temperature. 2. De-rating may be needed under low input voltages. Please refer to STATIC CHARACTERISTIC sections for details. 3. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time. 4. Standby power consumption is measured at 230VAC. 5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf) 6. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). 7. Flicker is measured at full load with the light source provided by MEAN WELL. 8. For XLC-S series: RCM is on a voluntary basis. Non IC classification Independent LED control gear is not suitable for residential installations. For XLC(except -S) series: RCM is on a voluntary basis and meets relevant IEC or AS/NZS standards complying with AS/NZS 4417.1. 9. This series meets the typical life expectancy of 50000 hours of operation when Tcase, particularly tc point(or TMP, per DLC), is about 75 or less. 10. For more information, please contact with MEAN WELL sales. Product Liability Disclaimer: For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:XLC-60-MA-SPEC 2025-02-24 60W Multiple-Stage Constant Power LED Driver XLC-60-MA series SPECIFICATION MODEL XLC-60-H-MA OPEN CIRCUIT VOLTAGE Note.2 60V DEFAULT CURRENT 1400mA CURRENT ADJ. RANGE (BY DIP SWITCH) 0.9~1.7A CONSTANT CURRENT OUTPUT REGION RATED POWER 9~54V Note.4 60W CURRENT RIPPLE Note.5 <4% CURRENT TOLERANCE ±5% DIMMING RANGE 0~100% SETUP, RISE TIME Note.6 2500ms,100ms/230VAC ,2500ms,100ms/115VAC VOLTAGE RANGE 100~305VAC 155~400VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR PF0.95/115VAC, PF0.95/230VAC,PF0.9/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) TOTAL HARMONIC DISTORTION THD< 20%(@load 60%/230VAC; @load 75%/277VAC); THD<10%@load 100%/230VAC (Please refer to "TOTAL HARMONIC DISTORTION(THD)" section) EFFICIENCY(Typ.) INPUT AC CURRENT Note.7 90% 0.75A/115VAC, 0.35A/230VAC, 0.3A/277VAC INRUSH CURRENT COLD START 15A(twidth=310s measured at 50% Ipeak) at 230VAC; Per NEMA 410 MAX. NO. of PSUs on 16A CIRCUIT BREAKER 25 units (circuit breaker of type B) / 36 units (circuit breaker of type C) at 230VAC LEAKAGE CURRENT <0.75mA / 277VAC STANDBY POWER CONSUMPTION Note.9 Standby power consumption<0.5W (Dimming off) SHORT CIRCUIT PROTECTION OVER TEMPERATURE Hiccup mode, recovers automatically after fault condition is removed Stage 1: De-rating to 75% loading; Stage 2: De-rating to 50% loading. Recovers automatically after fault condition is removed. WORKING TEMP. Tcase=-25~90 (Please refer to " OUTPUT LOAD vs TEMPERATURE" section) MAX. CASE TEMP. Tcase=90 WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY 20 ~ 90% RH non-condensing -40 ~ +80, 10 ~ 95% RH TEMP. COEFFICIENT ±0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13(EL) appendix J suitable for emergency installations (DC input 176-280VDC); BS EN/EN62384 , GB/T 19510.1, GB/T 19510.213, EAC TP TC 004 approved; Design refer to AS/NZS 61347-1, AS/NZS 61347-2-13 WITHSTAND VOLTAGE I/P-O/P: 3.75KVAC ISOLATION RESISTANCE EMC EMISSION SAFETY & EMC EMC IMMUNITY I/P-O/P: >100M Ohms / 500VDC / 25/ 70% RH Parameter Conducted Radiated Harmonic Current Voltage Flicker BS EN/EN61547 Parameter ESD Radiated EFT/Burst Surge Conducted Magnetic Field Standard BS EN/EN55015(CISPR15) ,GB/T 17743 BS EN/EN55015(CISPR15) ,GB/T 17743 BS EN/EN61000-3-2 , GB17625.1 BS EN/EN61000-3-3 Standard BS EN/EN61000-4-2 BS EN/EN61000-4-3 BS EN/EN61000-4-4 BS EN/EN61000-4-5 BS EN/EN61000-4-6 BS EN/EN61000-4-8 Voltage Dips and Interruptions BS EN/EN61000-4-11 Test Level/Note --------Class C @load60% ----- Test Level/Note Level 3, 8KV air ; Level 2, 4KV contact Level 2 Level 2 Level 3, 1KV/Line-Line Level 2 Level 2 70% residual voltage for 10 period, 0% residual voltage for 0.5 periods MATTER STANDARD Matter 1.3 Specification FLICKER Note.10 PstLM 1, SVM 0.4 OTHERS MTBF 4130.5K hrs min. Telcordia SR-332 (Bellcore) 317.7Khrs min. MIL-HDBK-217F (25) DIMENSION 176*45*32mm , 136*45*32mm (L*W*H) PACKING 0.32Kg; 40pcs/13.8Kg/0.48CUFT(for blank type); 0.39Kg; 40pcs/16.6Kg/0.61CUFT(for S-type); NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25 of ambient temperature. 2. Output hiccups under no-load condition. 3. Please refer to DRIVER METHODS OF LED MODULE. 4. De-rating may be needed under low input voltages. Please refer to STATIC CHARACTERISTIC sections for details. 5. Current ripple is measured 50%~100% of maximum voltage under rated power delivery. 6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time. 7. Efficiency is measured at 1050mA/54V output set by DIP switch. 8. For XLC-S series: RCM is on a voluntary basis. Non IC classification Independent LED control gear is not suitable for residential installations. For XLC(except -S) series: RCM is on a voluntary basis and meets relevant IEC or AS/NZS standards complying with AS/NZS 4417.1. 9. Standby power consumption is measured at 230VAC. 10. Flicker is measured at full load with the light source provided by MEAN WELL. 11. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf) 12. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m (6500ft). 13. This series meets the typical life expectancy of 50000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75 or less. 14. For more information, please contact with MEAN WELL sales. Product Liability Disclaimer: For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:XLC-60-MA-SPEC 2025-02-24 XLC-60-MA 60W Multiple-Stage Constant Power/Constant Voltage LED Driver series BLOCK DIAGRAM EMI FILTER I/P & RECTIFIERS POWER SWITCHING O.L.P. PWM&PFC CONTROL RECTIFIERS & FILTER O.T.P. DC to DC CURRENT & VOLTAGE LIMIT DETECTION CIRCUIT Fosc : 90KHz +V -V MATTER MODULE DRIVING METHODS OF LED MODULE I-V Operating Area XLC-60-H-MA For 60W application 60V 55V 50V 45V 40V 35V 30V 25V 20V 15V 10V 5V 0V 600mA 900mA, 54V 1050mA, 54V 1400mA, 43V 1700mA, 36V 900mA, 9V 1700mA, 9V 800mA 1000mA 1200mA 1400mA 1600mA 1800mA CONSTANT POWER TABLE XLC-60-H-MA is a multiple-stage constant power driver, selection of output current through DIP switch setting is exhibited below. Vo Io DIP S.W 1 2 3 9~54V 900mA ---- ---- ---- 9~54V 1050mA ---- ---- ON 9~50V 1200mA ---- ON ---- 9~46V 1300mA ---- ON ON 9~43V 1400mA(default) ON ---- ---- 9~40V 1500mA ON ---- ON 9~38V 1600mA ON ON ---- 9~36V 1700mA ON ON ON Note: The operating voltage range which show on this table is recommend to use. File Name:XLC-60-MA-SPEC 2025-02-24 XLC-60-MA 60W Multiple-Stage Constant Power/Constant Voltage LED Driver series PWM OUTPUT DIMMING PRINCIPLE For 12V/24V/48V PWM style output dimming Dimming is achieved by varying the duty cycle of the output current. ON Output DC current Io=0A OFF TON T TON Duty cycle(%) = ×100% T Output PWM frequency : 3.2kHz(Typ.) OUTPUT LOAD vs TEMPERATURE LOAD (%) 100 12,24V/230VAC 80 48V/H type/230VAC 60 110VAC 40 20 -25 -15 0 15 30 40 45 50 60 AMBIENT TEMPERATURE ,Ta () 70 (HORIZONTAL) LOAD (%) 100 80 60 40 20 -25 0 20 45 55 65 75 85 90 (HORIZONTAL) Tcase () LOAD (%) STATIC CHARACTERISTIC 100 90 80 70 60 50 40 100 110 130 150 170 190 210 230 250 270 290 305 INPUT VOLTAGE (V) 60Hz De-rating is needed under low input voltage. LIFETIME(Kh) LIFE TIME 120 100 80 60 40 20 0 25 30 35 40 45 50 55 60 65 70 75 80 85 90 Tcase () File Name:XLC-60-MA-SPEC 2025-02-24 XLC-60-MA 60W Multiple-Stage Constant Power/Constant Voltage LED Driver series TOTAL HARMONIC DISTORTION (THD) XLC-60-H-MA Modle, Tcase at 75 16 14 12 10 8 6 4 2 0 50 % 60 % 70 % 80 % 11 0V A C 23 0V A C 27 7V A C 90 % 10 0% LOAD (1400mA) THD 16 14 12 10 8 6 4 2 0 50 % 60 % 70 % 80 % 90 % 10 0% 11 0V A C 23 0V A C 27 7V A C LOAD (1700mA) THD PF POWER FACTOR (PF) CHARACTERISTIC XLC-60-H-MA Modle, Tcase at 75 1 0.95 0.9 0.85 0.8 0.75 0.7 50% 60% 70% 80% 90% 100% LOAD (1400mA) 110VAC 230VAC 277VAC PF 1 0.95 0.9 0.85 0.8 0.75 0.7 50% 60% 70% 80% LOAD (1700mA) 90% 100% 110VAC 230VAC 277VAC EFFICIENCY vs LOAD XLC-60-H-MA series possess superior working efficiency that up to 90% can be reached in field applications. XLC-60-H-MA Modle, Tcase at 75 EFFICIENCY (%) 95 90 85 80 75 70 65 60 55 50 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD (1400mA) 110VAC 230VAC 277VAC EFFICIENCY (%) 95 90 85 80 75 70 65 60 55 50 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD (1700mA) 110VAC 230VAC 277VAC File Name:XLC-60-MA-SPEC 2025-02-24 XLC-60-MA 60W Multiple-Stage Constant Power/Constant Voltage LED Driver series 37 mm 22.5 1 23 45 mm MECHANICAL SPECIFICATION XLC-60-MA series Built-in Type 2-3.6 1 2 TB1 136 mm tc 54 TB2 1 2 LED INDICATOR RESET BUTTON DIP-SWITCH (only for H type) Case No.XLC-60 Unit:mm Tolerance:±1 TB1 wiring: 8-9mm 128 mm Terminal Pin No. Assignment( TB1) Pin No. 1 2 Assignment AC/N AC/L Terminal Pin No. Assignment(TB2) Pin No. Assignment 1 +V 2 -V TB2 wiring: 8-9mm 32 mm 0.5-1.50mm2 0.5-1.50mm2 XLC-60-MAS series Independent Type 2-3.6 1 2 TB1 176 mm 136 mm 128 mm tc 54 TB2 1 2 LED INDICATOR RESET BUTTON DIP-SWITCH (only for H type) 22.5 37 mm Case No.XLC-60-S Unit:mm Tolerance:±1 45 mm 31.5 mm TB1 wiring: 8-9mm Terminal Pin No. Assignment( TB1) Pin No. 1 2 Assignment AC/N AC/L Terminal Pin No. Assignment(TB2) Pin No. 1 2 Assignment +V -V TB2 wiring: 8-9mm 32 mm 0.75-1.5mm2 LED indicator Flash slowly Flash quickly Constantly ON Constantly OFF Bluetooth Broadcast running Factory Reset running. Matter wireless connected Matter wireless disconnected and Bluetooth Broadcast OFF 0.5-1.5mm2 File Name:XLC-60-MA-SPEC 2025-02-24 XLC-60-MA 60W Multiple-Stage Constant Power/Constant Voltage LED Driver series FACTORY RESET By RESET BUTTON Press and hold the reset button for 10 seconds. When the LED indicator flashes quickly, release the button. The factory reset will then be completed. 1 2 TB1 TB2 1 2 LED INDICATOR RESET BUTTON DIP-SWITCH (only for H type) 1 23 By AC ON/OFF To perform factory reset through AC ON/OFF, the following process must be strictly followed. If the AC ON/OFF process is correct, the output light will flash for 15 seconds. When the flashing stop, it means the factory reset is completed. This operation is consistent with the factory reset effect performed by long-pressing the reset button. AC ON/OFF process to executes factory reset: 1 2 3 4 5 6 7 8 9 10 11 >25s 10-15s >30s 2-5s >30s 10-15s >30s 2-5s >30s 2-5s >30s Phase 1 2 3 4 5 6 7 8 9 10 11 Duration 10-15s >30s 2-5s >30s 10-15s >30s 2-5s >30s 2-5s >30s >25s AC status ON OFF ON OFF ON OFF ON OFF ON OFF ON(should wait until output light stop flashing) If there is a malfunction in the 'AC ON/OFF process', the process can be reset by the following method, starting from stage 1 again. Method 1: AC ON time exceeds 25 seconds Method 2: AC ON times for 2-5s and twice >25s >30s 2-5s 2-5s >30s >30s >30s File Name:XLC-60-MA-SPEC 2025-02-24 XLC-60-MA 60W Multiple-Stage Constant Power/Constant Voltage LED Driver series PLACEMENT Matter device has an integrated antenna for easy integration. In order to maximize the range in every direction, some design guidelines should be taken into consideration when mounting the device. The antenna positions of the device are shown in the figure below: AC Input Antenna location DC Output AC Input Antenna location DC Output Keep the device as far away as possible from vertical metal structures. When the device is mounted on a metal plate, the antenna should not be obscured, and there needs to be a cutout under the antenna to ensure that the RF signal can be transmitted. The device's communication range may be influenced by environmental factors and installation positioning, necessitating on-site adjustments and testing. Installation Manual Please refer to : http://www.meanwell.com/manual.html File Name:XLC-60-MA-SPEC 2025-02-24