Instructions for LED2WORK models including: IO-Link LED Light, IO-Link, LED Light, Light
12 de dez. de 2024 — At first glance, an LED light controlled via IO-Link behaves like any other RGB-W LED light from. LED2WORK used for ILLUMINATION and SIGNALING.
Dec 12, 2024 · At first glance, an LED light controlled via IO-Link behaves like any other RGB-W LED light from. LED2WORK used for ILLUMINATION and ...
LIGHT CONTROL VIA WHAT IS IO-LINK? IO-Link is a globally uniform, bidirectional communication standard understood by all IO-Link-capable devices. Translation into the language of the higher-level control only occurs in the centrally installed IO-Link Master. Many newer control systems already have IO-Link integrated. Automation is simple and cost-effective to implement with IO-Link. WHAT CAN LED2WORK IO-LINK LIGHTS DO (better)? At first glance, an LED light controlled via IO-Link behaves like any other RGB-W LED light from LED2WORK used for ILLUMINATION and SIGNALING. White light for illumination and a signaling function with blinking, flashing, and changing to colored light make the lamp a widely visible signal transmitter. HOWEVER, THE LED LIGHT WITH IO-LINK DOES SOME THINGS BETTER! When integrated into an IO-Link installation, the behaviour of the IO-Link-capable LED light can be easily and monitored via software. No additional PLC programming is required. Handling is more flexible, the parameter settings are more varied and clearer. The diagnostic data can be used for long-term planning, statistics and certifications. LED2WORK LED-LIGHTS WITH IO-LINK HAVE THESE FEATURES White light thanks to dedicated LED chips. Any colour can be mixed with additional RGB LED chips. In addition to white light, 14 memory locations are available for self-defined coloured light. An automatic colour change between 2 and 4 colours can be set. The light can be dimmed between 100% and 0% intensity. In addition to continuous light, blinking, flashing, glowing are possible. The duration of the effect is adjustable. The power of the light can be adjusted as required. If the operating temperature is too high, the liminaire automatically reduces the power. An additional connection PIN can provide the lamp with extra power. The diagnostic data ranges from the operating hours counter to the temperature and power display. OVERVIEW © LED2WORK GmbH, 75179 Pforzheim, Germany, www.led2work.com | L2W IO-Link V1_EN: 12. 12. 2024, 02:54 LIGHT CONTROL VIA FEATURES OF AN LED2WORK LED-LIGHT WITH IO-LINK AT A GLANCE Colour Selection White light + 14 memory locations for light colour mixes | 6 colours preset 1 2 3 Automatic colour change 2 colours 4 5 6 3 colours 7 8 4 colours Any colour can be mixed and saved from RGB. Predefined colours can also be changed, with the exception of white. Any saved colour can be assigned to the automatic colour change. Dimming Operating Modes 100% - 0% Diagnostic Data Operating hours counter Remaining operating hours Maximum operating hours reached Supply voltage L+ Supply voltage PIN 2 Operating temperature Highest recorded operating temperature Power limit white light colour Power limit red light colour Power limit green light colour Power limit blue light colour static blinking flashing breathing/glowing The duration of periods can be adjusted for blinking, flashing, breathing, and color changing. Dynamics The minimum brightness of the effect can be set for breathing/glowing Special Functions Power Reduction The maximum power of the light source can be limited so that less powerful IO-Link masters can also be used. Power supply to PIN 2 For a stronger luminaire on a less powerful IO-Link Master, an additional power supply to the light source can be switched on PIN 2. Overtemperature reduction If a temperature of more than 80°C is reached within the luminaire at a higher ambient temperature, the power automatically reduces in steps until the temperature remains consistently below 80°C. © LED2WORK GmbH, 75179 Pforzheim, Germany, www.led2work.com | L2W IO-Link V1_EN: 12. 12. 2024, 02:54 SYNOPSISAdobe PDF Library 17.0 Adobe InDesign 20.0 (Windows)