Honeywell Waterproof Fire Chest User Guide
Welcome
Your new Honeywell Fire and Water Chest provides years of document and media protection. Designed and built to high manufacturing standards, these chests ensure maximum user satisfaction under various conditions, offering "Peace of Mind" for years to come.
Before Use
Important: Before Using Your New Chest
The chest should be opened and aired out for at least 30 minutes to allow the waterproof seal to decompress and perform as intended.
Warning
⚠ To avoid possible injury, ensure hands or fingers are clear before closing the chest lid.
Care and Maintenance
Properly maintained, your Fire and Water Chest will operate for many years. Follow these precautions for optimum performance:
Clean Hands
Never operate the digital keypad with dirty, wet, or debris-covered hands.
Clean Chest Surface
For cleaning the chest surface, use a mild cleaner (e.g., window cleaner) to avoid scratching or discoloration. Always wipe dry and never use abrasive cleansers.
Product Overview
Exterior Components
- A - Compression Latches
- B - Chest Lid
- C - Lock Assembly
- D - Chest Body
- E - Latch Buttons (All Models except 1101)
- F - Handle (All Models except 1106 & 1108)
- G - Lock Cylinder
Interior Components
- H - Protective Waterproof Seal (All Models except 1101)
- I - Hydraulic Hinge (1104 & 1108 ONLY)
How to Store Chest
- Correct Storage: Store the chest flat with the lid on top.
- Incorrect Storage: Never store the chest on its sides or upside-down.
Unlocking and Opening Chest
- Press the small black piece at the bottom of the latches.
- Insert the key into the lock cylinder.
- Turn the key clockwise (to the right) a 1/4 turn.
- The chest is now unlocked; lift the lid.
Warning: ⚠ To avoid possible injury, ensure hands or fingers are clear before closing the chest lid.
Always Open Lid Completely (Models 1104 & 1108)
Important: Models 1104 and 1108 have hydraulic hinges that close the lid slowly to prevent injury. Always open the lid completely to activate these hinges.
Warning: ⚠ To avoid possible injury, ensure hands or fingers are clear before closing the chest lid.
Closing and Locking
Model 1101
- Carefully lower the lid into the closed position.
- Insert the key into the lock cylinder.
- Turn the key counter-clockwise (to the left) a 1/4 turn.
- The chest is now locked; remove the key.
All Models Except 1101
- Carefully lower the lid into the closed position.
- Press the top of the latch flat against the chest and hold.
- While holding the latch top, press the bottom of the latch to lock it into the closed position.
- Turn the key counter-clockwise (to the left) a 1/4 turn.
- The chest is now locked; remove the key.
Interior Moisture Notice
Important: For optimal performance, open and air out Fire and Water Chests for at least 30 minutes weekly to prevent moisture buildup. Occasional longer airing periods are recommended. This helps balance interior and exterior humidity and allows trapped moisture to escape. Failure to air out the chest may result in a musty smell, particularly on paperwork. The manufacturer is not responsible for damage or loss of items due to moisture. Proper care and preventative maintenance are the owner's responsibility to ensure continued protection and performance.
Locating Key Identification Numbers
Key Number
A 3-4 digit number is etched on the metal collar around the keyhole.
This same 3-4 digit number is also etched on the key itself.
Proper Use
Honeywell Chests protect paper documents and files from heat and moisture damage during fire and water exposure.
Warning: This chest is not intended for storing medications, firearms, ammunition, or any combustible items.
Do not store pearls in this chest, as they may be damaged at temperatures below 350°F.
Fire Protection
Models 1101, 1102, 1103 & 1106: UL testing verifies interior temperature remains below 350°F (177°C) for 30 minutes when the outside temperature reaches 1550°F (843°C).
Models 1104 & 1108: UL testing verifies interior temperature remains below 350°F (177°C) for at least 60 minutes when the outside temperature reaches 1700°F (927°C).
Water Protection
All Models except 1101: Independent testing confirms the interior remains dry when completely submerged for up to 24 hours.
Consumer Assistance
If any items are missing, please contact Consumer Assistance. Refer to page 9 for contact information.
Ordering Additional Keys
Refer to page 10 for information on ordering additional keys.
