Siemens SIMATIC ET 200SP BaseUnit BU15-P16+A0+2D
6ES7193-6BP00-0DA0
Product Description
This document provides the technical specifications for the Siemens SIMATIC ET 200SP BaseUnit BU15-P16+A0+2D. It is a BaseUnit of type A0, featuring Push-in terminals, without AUX terminals, and a new load group. Its dimensions are 15 mm in width and 117 mm in height.
General Information
- Product type designation: 6ES7193-6BP00-0DA0
- HW functional status: BU type A0 From FS06
- Supply voltage: Rated value (DC) 24 V. External protection for power supply lines is required: Yes; a 24 V DC/10 A miniature circuit breaker with type B or C tripping characteristic is recommended.
- Mains filter: Yes; integrated.
- Current carrying capacity: Maximum for P1 and P2 bus is 10 A; maximum for process terminals is 2 A.
- Formation of potential groups: New potential group.
- Potential group continued from the left: Yes.
Hardware Configuration
- Potential separation between the potential groups: Yes.
- Isolation tested with: 707 V DC (type test).
Ambient Conditions
- Ambient temperature during operation:
- Horizontal installation, minimum: -30 °C
- Horizontal installation, maximum: 60 °C
- Vertical installation, minimum: -30 °C
- Vertical installation, maximum: 50 °C
- Installation altitude above sea level, max.: 2,000 m. For installation altitudes greater than 2,000 m, please inquire.
Accessories
- Color coding labels: For process terminals: CC00 to CC09. For AUX terminals: not available. For add-on terminals: not available.
Connection Method
| Parameter | Value |
|---|---|
| Terminal type | Push-in terminal |
| Conductor cross-section, minimum | 0.14 mm²; AWG 26 |
| Conductor cross-section, maximum | 2.5 mm²; AWG 14 |
| Number of process terminals to I/O module | 16 |
| Number of terminals to AUX bus | 0 |
| Number of add-on terminals | 0 |
| Number of terminals with connection to P1 and P2 bus | 2 |
Dimensions
- Width: 15 mm
- Height: 117 mm
- Depth: 35 mm
Weights
- Weight, approx.: 40 g
