Link: The wallet designed for the internet
TP-Link: Your Smart Home, SimplifiedTP-Link: Your Smart Home, Simplified
User Guide for tp-link models including: InSight S345, InSight S355, InSight S385, InSight S445, InSight S455, InSight S485, InSight S245, InSight S225I, InSight S245ZI, InSight S345ZI, InSight S445ZI, InSight S385PI, InSight S485PI, InSight S655I, InSight S345S, InSight S445S, InSight S345 Network Camera, InSight S345, Network Camera, Camera
prieš 7 dienas — Product Name: Network Camera. Model Number: InSight S345/ InSight S355/InSight S385/InSight S445/. InSight S455/InSight S485/InSight S245/InSight ...
File Info : application/pdf, 7 Pages, 382.56KB
DocumentDocumentFCC compliance information statement
Product Name: Network Camera
Model Number: InSight S345/ InSight S355/InSight S385/InSight S445/
InSight S455/InSight S485/InSight S245/InSight S225I/InSight S245ZI/
InSight S345ZI/InSight S445ZI/InSight S385PI/InSight S485PI/InSight S655I/
InSight S345S/InSight S445S
Responsible party:
TP-Link Systems Inc.
Address: 10 Mauchly, Irvine, CA 92618
Website: https://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
·
Reorient or relocate the receiving antenna.
·
Increase the separation between the equipment and receiver.
·
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
·
Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference
that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
We, TP-Link Systems Inc., has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15.
There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2024-7-25
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU and (EU)2015/863. The original EU Declaration of Conformity may be found at https://www.tp-link.com/ en/support/ce/
UKCA Mark
UK Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016. The original UK Declaration of Conformity may be found at https://www.tp-link.com/ support/ukca
Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1) L'appareil ne doit pas produire de brouillage; 2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B)
40
Equipment name Network Camera
Type designation (Type)
InSight S345/ InSight S355/InSight S385/InSight S445/InSight S455/InSight S485/InSight S245/ InSight S225I/InSight S245ZI/InSight S345ZI/ InSight S445ZI/InSight S385PI/InSight S485PI/
InSight S655I/InSight S345S/InSight S445S
nit
PCB
Lead (Pb)
Restricted substances and its chemical symbols
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent chromium
(Cr+6)
Polybrominated
biphenyls
(PBB)
Polybrominated diphenyl ethers
(PBDE)
-
1.0.1 wt %0.01 wt % Note 1"Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2. Note 2"" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3.- Note 3The "-" indicates that the restricted substance corresponds to the exemption.
, .
Safety Information
· Keep the device away from water, fire, humidity or hot environments. (For indoor cameras)
· Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid. (For outdoor cameras)
· Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
· This product can be powered only by power supplies that comply with Power Source Class 2 ( PS2) or Limited Power Source (LPS) of IEC 62368-1.(For PoE cameras)
· Do not use damaged charger or USB cable to charge the device. · Do not use any other chargers than those recommended · Adapter shall be installed near the equipment and shall be easily accessible. · Use only power supplies which are provided by manufacturer and in the original
packing of this product. If you have any questions, please don't hesitate to contact us. · Operating Temperature: -30-60 Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
Explanations of the symbols on the product label
Note: The product label can be found at the bottom of the product and its I.T.E. power supply. Symbols may vary from products.
Symbol Explanation Class II equipment
Class II equipment with functional earthing Alternating current Direct current Polarity of d.c. power connector For indoor use only
Dangerous voltage
Caution, risk of electric shock
Energy efficiency Marking
Protective earth
Earth
Frame or chassis Functional earthing Caution, hot surface
Caution
Operator's manual
Stand-by
"ON"/"OFF" (push-push)
Fuse
Fuse is used in neutral N
RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.
Caution, avoid listening at high volume levels for long periods
Disconnection, all power plugs
m
Switch of mini-gap construction
Switch of micro-gap construction (for US version)
µ
Switch of micro-gap / micro-disconnection construction (for
other versions except US)
Switch without contact gap (Semiconductor switching device)
Recommended Power Adapters
Product Model
Power Supply
InSight S345 InSight S355 InSight S385
12V/1A 12V/1A 12V/1A
InSight S445 InSight S455 InSight S485 InSight S245 InSight S285 InSight S225I InSight S245ZI InSight S345ZI InSight S445ZI InSight S385PI InSight S655I
12V/1A 12V/1A 12V/1A 12V/1A 12V/1A 12V/1A 12V/1A 12V/1A 12V/1A 12V/1A 12V/1A
Power Model
T120100 T120100 T120100 T120100 T120100 T120100 T120100 T120100 T120100 T120100 T120100 T120100 T120100 T120100